Results for: "fnmatch"

File::fnmatch

Returns true if path matches against pattern. The pattern is not a regular expression; instead it follows rules similar to shell filename globbing. It may contain the following metacharacters:

*

Matches any file. Can be restricted by other values in the glob. Equivalent to /.*/x in regexp.

*

Matches all regular files

c*

Matches all files beginning with c

*c

Matches all files ending with c

*c*

Matches all files that have c in them (including at the beginning or end).

To match hidden files (that start with a .) set the File::FNM_DOTMATCH flag.

**

Matches directories recursively or files expansively.

?

Matches any one character. Equivalent to /.{1}/ in regexp.

[set]

Matches any one character in set. Behaves exactly like character sets in Regexp, including set negation ([^a-z]).

\

Escapes the next metacharacter.

{a,b}

Matches pattern a and pattern b if File::FNM_EXTGLOB flag is enabled. Behaves like a Regexp union ((?:a|b)).

flags is a bitwise OR of the FNM_XXX constants. The same glob pattern and flags are used by Dir::glob.

Examples:

File.fnmatch('cat',       'cat')        #=> true  # match entire string
File.fnmatch('cat',       'category')   #=> false # only match partial string

File.fnmatch('c{at,ub}s', 'cats')                    #=> false # { } isn't supported by default
File.fnmatch('c{at,ub}s', 'cats', File::FNM_EXTGLOB) #=> true  # { } is supported on FNM_EXTGLOB

File.fnmatch('c?t',     'cat')          #=> true  # '?' match only 1 character
File.fnmatch('c??t',    'cat')          #=> false # ditto
File.fnmatch('c*',      'cats')         #=> true  # '*' match 0 or more characters
File.fnmatch('c*t',     'c/a/b/t')      #=> true  # ditto
File.fnmatch('ca[a-z]', 'cat')          #=> true  # inclusive bracket expression
File.fnmatch('ca[^t]',  'cat')          #=> false # exclusive bracket expression ('^' or '!')

File.fnmatch('cat', 'CAT')                     #=> false # case sensitive
File.fnmatch('cat', 'CAT', File::FNM_CASEFOLD) #=> true  # case insensitive
File.fnmatch('cat', 'CAT', File::FNM_SYSCASE)  #=> true or false # depends on the system default

File.fnmatch('?',   '/', File::FNM_PATHNAME)  #=> false # wildcard doesn't match '/' on FNM_PATHNAME
File.fnmatch('*',   '/', File::FNM_PATHNAME)  #=> false # ditto
File.fnmatch('[/]', '/', File::FNM_PATHNAME)  #=> false # ditto

File.fnmatch('\?',   '?')                       #=> true  # escaped wildcard becomes ordinary
File.fnmatch('\a',   'a')                       #=> true  # escaped ordinary remains ordinary
File.fnmatch('\a',   '\a', File::FNM_NOESCAPE)  #=> true  # FNM_NOESCAPE makes '\' ordinary
File.fnmatch('[\?]', '?')                       #=> true  # can escape inside bracket expression

File.fnmatch('*',   '.profile')                      #=> false # wildcard doesn't match leading
File.fnmatch('*',   '.profile', File::FNM_DOTMATCH)  #=> true  # period by default.
File.fnmatch('.*',  '.profile')                      #=> true

File.fnmatch('**/*.rb', 'main.rb')                  #=> false
File.fnmatch('**/*.rb', './main.rb')                #=> false
File.fnmatch('**/*.rb', 'lib/song.rb')              #=> true
File.fnmatch('**.rb', 'main.rb')                    #=> true
File.fnmatch('**.rb', './main.rb')                  #=> false
File.fnmatch('**.rb', 'lib/song.rb')                #=> true
File.fnmatch('*',     'dave/.profile')              #=> true

File.fnmatch('**/foo', 'a/b/c/foo', File::FNM_PATHNAME)     #=> true
File.fnmatch('**/foo', '/a/b/c/foo', File::FNM_PATHNAME)    #=> true
File.fnmatch('**/foo', 'c:/a/b/c/foo', File::FNM_PATHNAME)  #=> true
File.fnmatch('**/foo', 'a/.b/c/foo', File::FNM_PATHNAME)    #=> false
File.fnmatch('**/foo', 'a/.b/c/foo', File::FNM_PATHNAME | File::FNM_DOTMATCH) #=> true

Pathname#fnmatch

Return true if the receiver matches the given pattern.

See File.fnmatch.

NoMatchingPatternError

No documentation available

NoMatchingPatternKeyError

No documentation available

MatchData

MatchData encapsulates the result of matching a Regexp against string. It is returned by Regexp#match and String#match, and also stored in a global variable returned by Regexp.last_match.

Usage:

url = 'https://docs.ruby-lang.org/en/2.5.0/MatchData.html'
m = url.match(/(\d\.?)+/)   # => #<MatchData "2.5.0" 1:"0">
m.string                    # => "https://docs.ruby-lang.org/en/2.5.0/MatchData.html"
m.regexp                    # => /(\d\.?)+/
# entire matched substring:
m[0]                        # => "2.5.0"

# Working with unnamed captures
m = url.match(%r{([^/]+)/([^/]+)\.html$})
m.captures                  # => ["2.5.0", "MatchData"]
m[1]                        # => "2.5.0"
m.values_at(1, 2)           # => ["2.5.0", "MatchData"]

# Working with named captures
m = url.match(%r{(?<version>[^/]+)/(?<module>[^/]+)\.html$})
m.captures                  # => ["2.5.0", "MatchData"]
m.named_captures            # => {"version"=>"2.5.0", "module"=>"MatchData"}
m[:version]                 # => "2.5.0"
m.values_at(:version, :module)
                            # => ["2.5.0", "MatchData"]
# Numerical indexes are working, too
m[1]                        # => "2.5.0"
m.values_at(1, 2)           # => ["2.5.0", "MatchData"]

Global variables equivalence

Parts of last MatchData (returned by Regexp.last_match) are also aliased as global variables:

See also “Special global variables” section in Regexp documentation.

FloatDomainError

Raised when attempting to convert special float values (in particular Infinity or NaN) to numerical classes which don’t support them.

Float::INFINITY.to_r   #=> FloatDomainError: Infinity

BigMath

Provides mathematical functions.

Example:

require "bigdecimal/math"

include BigMath

a = BigDecimal((PI(100)/2).to_s)
puts sin(a,100) # => 0.99999999999999999999......e0

Benchmark

The Benchmark module provides methods to measure and report the time used to execute Ruby code.

The result:

              user     system      total        real
for:      1.010000   0.000000   1.010000 (  1.015688)
times:    1.000000   0.000000   1.000000 (  1.003611)
upto:     1.030000   0.000000   1.030000 (  1.028098)

MakeMakefile

mkmf.rb is used by Ruby C extensions to generate a Makefile which will correctly compile and link the C extension to Ruby and a third-party library.

Math

Module Math provides methods for basic trigonometric, logarithmic, and transcendental functions, and for extracting roots.

You can write its constants and method calls thus:

Math::PI      # => 3.141592653589793
Math::E       # => 2.718281828459045
Math.sin(0.0) # => 0.0
Math.cos(0.0) # => 1.0

If you include module Math, you can write simpler forms:

include Math
PI       # => 3.141592653589793
E        # => 2.718281828459045
sin(0.0) # => 0.0
cos(0.0) # => 1.0

For simplicity, the examples here assume:

include Math
INFINITY = Float::INFINITY

The domains and ranges for the methods are denoted by open or closed intervals, using, respectively, parentheses or square brackets:

Many values returned by Math methods are numerical approximations. This is because many such values are, in mathematics, of infinite precision, while in numerical computation the precision is finite.

Thus, in mathematics, cos(π/2) is exactly zero, but in our computation cos(PI/2) is a number very close to zero:

cos(PI/2) # => 6.123031769111886e-17

For very large and very small returned values, we have added formatted numbers for clarity:

tan(PI/2)  # => 1.633123935319537e+16   # 16331239353195370.0
tan(PI)    # => -1.2246467991473532e-16 # -0.0000000000000001

See class Float for the constants that affect Ruby’s floating-point arithmetic.

What’s Here

Trigonometric Functions

Inverse Trigonometric Functions

Hyperbolic Trigonometric Functions

Inverse Hyperbolic Trigonometric Functions

Exponentiation and Logarithmic Functions

Fraction and Exponent Functions

Root Functions

Error Functions

Gamma Functions

Hypotenuse Function

Prism::InterpolatedMatchLastLineNode

Represents a regular expression literal that contains interpolation that is being used in the predicate of a conditional to implicitly match against the last line read by an IO object.

if /foo #{bar} baz/ then end
   ^^^^^^^^^^^^^^^^

Prism::MatchPredicateNode

Represents the use of the modifier ‘in` operator.

foo in bar
^^^^^^^^^^

Gem::PlatformMismatch

Generated when trying to lookup a gem to indicate that the gem was found, but that it isn’t usable on the current platform.

fetch and install read these and report them to the user to aid in figuring out why a gem couldn’t be installed.

Gem::RubyVersionMismatch

Raised when a gem dependencies file specifies a ruby version that does not match the current version.

Prism::CaseMatchNode

Represents the use of a case statement for pattern matching.

case true
in false
end
^^^^^^^^^

Prism::MatchLastLineNode

Represents a regular expression literal used in the predicate of a conditional to implicitly match against the last line read by an IO object.

if /foo/i then end
   ^^^^^^

Prism::MatchRequiredNode

Represents the use of the ‘=>` operator.

foo => bar
^^^^^^^^^^

Prism::MatchWriteNode

Represents writing local variables using a regular expression match with named capture groups.

/(?<foo>bar)/ =~ baz
^^^^^^^^^^^^^^^^^^^^

Net::HTTPNonAuthoritativeInformation

Response class for Non-Authoritative Information responses (status code 203).

The Non-Authoritative Information response indicates that the server is a transforming proxy (such as a Web accelerator) that received a 200 OK response from its origin, and is returning a modified version of the origin’s response.

References:

Prism::Dispatcher

The dispatcher class fires events for nodes that are found while walking an AST to all registered listeners. It’s useful for performing different types of analysis on the AST while only having to walk the tree once.

To use the dispatcher, you would first instantiate it and register listeners for the events you’re interested in:

class OctalListener
  def on_integer_node_enter(node)
    if node.octal? && !node.slice.start_with?("0o")
      warn("Octal integers should be written with the 0o prefix")
    end
  end
end

dispatcher = Dispatcher.new
dispatcher.register(listener, :on_integer_node_enter)

Then, you can walk any number of trees and dispatch events to the listeners:

result = Prism.parse("001 + 002 + 003")
dispatcher.dispatch(result.value)

Optionally, you can also use ‘#dispatch_once` to dispatch enter and leave events for a single node without recursing further down the tree. This can be useful in circumstances where you want to reuse the listeners you already have registers but want to stop walking the tree at a certain point.

integer = result.value.statements.body.first.receiver.receiver
dispatcher.dispatch_once(integer)

Float

A Float object represents a sometimes-inexact real number using the native architecture’s double-precision floating point representation.

Floating point has a different arithmetic and is an inexact number. So you should know its esoteric system. See following:

You can create a Float object explicitly with:

You can convert certain objects to Floats with:

What’s Here

First, what’s elsewhere. Class Float:

Here, class Float provides methods for:

Querying

Comparing

Converting

Continuation

Continuation objects are generated by Kernel#callcc, after having +require+d continuation. They hold a return address and execution context, allowing a nonlocal return to the end of the callcc block from anywhere within a program. Continuations are somewhat analogous to a structured version of C’s setjmp/longjmp (although they contain more state, so you might consider them closer to threads).

For instance:

require "continuation"
arr = [ "Freddie", "Herbie", "Ron", "Max", "Ringo" ]
callcc{|cc| $cc = cc}
puts(message = arr.shift)
$cc.call unless message =~ /Max/

produces:

Freddie
Herbie
Ron
Max

Also you can call callcc in other methods:

require "continuation"

def g
  arr = [ "Freddie", "Herbie", "Ron", "Max", "Ringo" ]
  cc = callcc { |cc| cc }
  puts arr.shift
  return cc, arr.size
end

def f
  c, size = g
  c.call(c) if size > 1
end

f

This (somewhat contrived) example allows the inner loop to abandon processing early:

require "continuation"
callcc {|cont|
  for i in 0..4
    print "#{i}: "
    for j in i*5...(i+1)*5
      cont.call() if j == 17
      printf "%3d", j
    end
  end
}
puts

produces:

0:   0  1  2  3  4
1:   5  6  7  8  9
2:  10 11 12 13 14
3:  15 16

Enumerator

A class which allows both internal and external iteration.

An Enumerator can be created by the following methods.

Most methods have two forms: a block form where the contents are evaluated for each item in the enumeration, and a non-block form which returns a new Enumerator wrapping the iteration.

enumerator = %w(one two three).each
puts enumerator.class # => Enumerator

enumerator.each_with_object("foo") do |item, obj|
  puts "#{obj}: #{item}"
end

# foo: one
# foo: two
# foo: three

enum_with_obj = enumerator.each_with_object("foo")
puts enum_with_obj.class # => Enumerator

enum_with_obj.each do |item, obj|
  puts "#{obj}: #{item}"
end

# foo: one
# foo: two
# foo: three

This allows you to chain Enumerators together. For example, you can map a list’s elements to strings containing the index and the element as a string via:

puts %w[foo bar baz].map.with_index { |w, i| "#{i}:#{w}" }
# => ["0:foo", "1:bar", "2:baz"]

External Iteration

An Enumerator can also be used as an external iterator. For example, Enumerator#next returns the next value of the iterator or raises StopIteration if the Enumerator is at the end.

e = [1,2,3].each   # returns an enumerator object.
puts e.next   # => 1
puts e.next   # => 2
puts e.next   # => 3
puts e.next   # raises StopIteration

next, next_values, peek, and peek_values are the only methods which use external iteration (and Array#zip(Enumerable-not-Array) which uses next internally).

These methods do not affect other internal enumeration methods, unless the underlying iteration method itself has side-effect, e.g. IO#each_line.

FrozenError will be raised if these methods are called against a frozen enumerator. Since rewind and feed also change state for external iteration, these methods may raise FrozenError too.

External iteration differs significantly from internal iteration due to using a Fiber:

Concretely:

Thread.current[:fiber_local] = 1
Fiber[:storage_var] = 1
e = Enumerator.new do |y|
  p Thread.current[:fiber_local] # for external iteration: nil, for internal iteration: 1
  p Fiber[:storage_var] # => 1, inherited
  Fiber[:storage_var] += 1
  y << 42
end

p e.next # => 42
p Fiber[:storage_var] # => 1 (it ran in a different Fiber)

e.each { p _1 }
p Fiber[:storage_var] # => 2 (it ran in the same Fiber/"stack" as the current Fiber)

Convert External Iteration to Internal Iteration

You can use an external iterator to implement an internal iterator as follows:

def ext_each(e)
  while true
    begin
      vs = e.next_values
    rescue StopIteration
      return $!.result
    end
    y = yield(*vs)
    e.feed y
  end
end

o = Object.new

def o.each
  puts yield
  puts yield(1)
  puts yield(1, 2)
  3
end

# use o.each as an internal iterator directly.
puts o.each {|*x| puts x; [:b, *x] }
# => [], [:b], [1], [:b, 1], [1, 2], [:b, 1, 2], 3

# convert o.each to an external iterator for
# implementing an internal iterator.
puts ext_each(o.to_enum) {|*x| puts x; [:b, *x] }
# => [], [:b], [1], [:b, 1], [1, 2], [:b, 1, 2], 3

StopIteration

Raised to stop the iteration, in particular by Enumerator#next. It is rescued by Kernel#loop.

loop do
  puts "Hello"
  raise StopIteration
  puts "World"
end
puts "Done!"

produces:

Hello
Done!

fatal

fatal is an Exception that is raised when Ruby has encountered a fatal error and must exit.

Next
Search took: 10ms  ·  Total Results: 2369