Returns a simpler approximation of the value (flt-|eps| <= result <= flt+|eps|). If the optional argument eps is not given, it will be chosen automatically.
0.3.rationalize #=> (3/10) 1.333.rationalize #=> (1333/1000) 1.333.rationalize(0.01) #=> (4/3)
See also Float#to_r.
Returns a simpler approximation of the value if the optional argument eps is given (rat-|eps| <= result <= rat+|eps|), self otherwise.
r = Rational(5033165, 16777216) r.rationalize #=> (5033165/16777216) r.rationalize(Rational('0.01')) #=> (3/10) r.rationalize(Rational('0.1')) #=> (1/3)
Reads up to maxlen bytes from the stream; returns a string (either a new string or the given out_string). Its encoding is:
The unchanged encoding of out_string, if out_string is given.
ASCII-8BIT, otherwise.
Contains maxlen bytes from the stream, if available.
Otherwise contains all available bytes, if any available.
Otherwise is an empty string.
With the single non-negative integer argument maxlen given, returns a new string:
f = File.new('t.txt') f.readpartial(20) # => "First line\nSecond l" f.readpartial(20) # => "ine\n\nFourth line\n" f.readpartial(20) # => "Fifth line\n" f.readpartial(20) # Raises EOFError. f.close
With both argument maxlen and string argument out_string given, returns modified out_string:
f = File.new('t.txt') s = 'foo' f.readpartial(20, s) # => "First line\nSecond l" s = 'bar' f.readpartial(0, s) # => "" f.close
This method is useful for a stream such as a pipe, a socket, or a tty. It blocks only when no data is immediately available. This means that it blocks only when all of the following are true:
The byte buffer in the stream is empty.
The content of the stream is empty.
The stream is not at EOF.
When blocked, the method waits for either more data or EOF on the stream:
If more data is read, the method returns the data.
If EOF is reached, the method raises EOFError.
When not blocked, the method responds immediately:
Returns data from the buffer if there is any.
Otherwise returns data from the stream if there is any.
Otherwise raises EOFError if the stream has reached EOF.
Note that this method is similar to sysread. The differences are:
If the byte buffer is not empty, read from the byte buffer instead of “sysread for buffered IO (IOError)”.
It doesn’t cause Errno::EWOULDBLOCK and Errno::EINTR. When readpartial meets EWOULDBLOCK and EINTR by read system call, readpartial retries the system call.
The latter means that readpartial is non-blocking-flag insensitive. It blocks on the situation IO#sysread causes Errno::EWOULDBLOCK as if the fd is blocking mode.
Examples:
# # Returned Buffer Content Pipe Content r, w = IO.pipe # w << 'abc' # "" "abc". r.readpartial(4096) # => "abc" "" "" r.readpartial(4096) # (Blocks because buffer and pipe are empty.) # # Returned Buffer Content Pipe Content r, w = IO.pipe # w << 'abc' # "" "abc" w.close # "" "abc" EOF r.readpartial(4096) # => "abc" "" EOF r.readpartial(4096) # raises EOFError # # Returned Buffer Content Pipe Content r, w = IO.pipe # w << "abc\ndef\n" # "" "abc\ndef\n" r.gets # => "abc\n" "def\n" "" w << "ghi\n" # "def\n" "ghi\n" r.readpartial(4096) # => "def\n" "" "ghi\n" r.readpartial(4096) # => "ghi\n" "" ""
Returns true if the set is a superset of the given set.
Returns true if the set and the given enumerable have at least one element in common.
Set[1, 2, 3].intersect? Set[4, 5] #=> false Set[1, 2, 3].intersect? Set[3, 4] #=> true Set[1, 2, 3].intersect? 4..5 #=> false Set[1, 2, 3].intersect? [3, 4] #=> true
Sets a socket option. These are protocol and system specific, see your local system documentation for details.
level is an integer, usually one of the SOL_ constants such as Socket::SOL_SOCKET, or a protocol level. A string or symbol of the name, possibly without prefix, is also accepted.
optname is an integer, usually one of the SO_ constants, such as Socket::SO_REUSEADDR. A string or symbol of the name, possibly without prefix, is also accepted.
optval is the value of the option, it is passed to the underlying setsockopt() as a pointer to a certain number of bytes. How this is done depends on the type:
Integer: value is assigned to an int, and a pointer to the int is passed, with length of sizeof(int).
true or false: 1 or 0 (respectively) is assigned to an int, and the int is passed as for an Integer. Note that false must be passed, not nil.
String: the string’s data and length is passed to the socket.
socketoption is an instance of Socket::Option
Some socket options are integers with boolean values, in this case setsockopt could be called like this:
sock.setsockopt(:SOCKET, :REUSEADDR, true) sock.setsockopt(Socket::SOL_SOCKET,Socket::SO_REUSEADDR, true) sock.setsockopt(Socket::Option.bool(:INET, :SOCKET, :REUSEADDR, true))
Some socket options are integers with numeric values, in this case setsockopt could be called like this:
sock.setsockopt(:IP, :TTL, 255) sock.setsockopt(Socket::IPPROTO_IP, Socket::IP_TTL, 255) sock.setsockopt(Socket::Option.int(:INET, :IP, :TTL, 255))
Option values may be structs. Passing them can be complex as it involves examining your system headers to determine the correct definition. An example is an ip_mreq, which may be defined in your system headers as:
struct ip_mreq { struct in_addr imr_multiaddr; struct in_addr imr_interface; };
In this case setsockopt could be called like this:
optval = IPAddr.new("224.0.0.251").hton + IPAddr.new(Socket::INADDR_ANY, Socket::AF_INET).hton sock.setsockopt(Socket::IPPROTO_IP, Socket::IP_ADD_MEMBERSHIP, optval)
Runs the early binding method to set property. The 1st argument specifies dispatch ID, the 2nd argument specifies the array of arguments, the 3rd argument specifies the array of the type of arguments.
excel = WIN32OLE.new('Excel.Application') excel._setproperty(558, [true], [WIN32OLE::VARIANT::VT_BOOL]) # same effect as excel.visible = true
Sets property of OLE object. When you want to set property with argument, you can use this method.
excel = WIN32OLE.new('Excel.Application') excel.Visible = true book = excel.workbooks.add sheet = book.worksheets(1) sheet.setproperty('Cells', 1, 2, 10) # => The B1 cell value is 10.
Reads at most maxlen bytes from the ARGF stream.
If the optional outbuf argument is present, it must reference a String, which will receive the data. The outbuf will contain only the received data after the method call even if it is not empty at the beginning.
It raises EOFError on end of ARGF stream. Since ARGF stream is a concatenation of multiple files, internally EOF is occur for each file. ARGF.readpartial returns empty strings for EOFs except the last one and raises EOFError for the last one.
Sets optional filename and line number that will be used in ERB code evaluation and error reporting. See also filename= and lineno=
erb = ERB.new('<%= some_x %>') erb.render # undefined local variable or method `some_x' # from (erb):1 erb.location = ['file.erb', 3] # All subsequent error reporting would use new location erb.render # undefined local variable or method `some_x' # from file.erb:4
Returns a string for DNS reverse lookup. It returns a string in RFC3172 form for an IPv6 address.
Opens a transaction block for the store. See Transactions.
With argument read_only as false, the block may both read from and write to the store.
With argument read_only as true, the block may not include calls to transaction, []=, or delete.
Raises an exception if called within a transaction block.
Returns x/y or arg as a Rational.
Rational(2, 3) #=> (2/3) Rational(5) #=> (5/1) Rational(0.5) #=> (1/2) Rational(0.3) #=> (5404319552844595/18014398509481984) Rational("2/3") #=> (2/3) Rational("0.3") #=> (3/10) Rational("10 cents") #=> ArgumentError Rational(nil) #=> TypeError Rational(1, nil) #=> TypeError Rational("10 cents", exception: false) #=> nil
Syntax of the string form:
string form = extra spaces , rational , extra spaces ;
rational = [ sign ] , unsigned rational ;
unsigned rational = numerator | numerator , "/" , denominator ;
numerator = integer part | fractional part | integer part , fractional part ;
denominator = digits ;
integer part = digits ;
fractional part = "." , digits , [ ( "e" | "E" ) , [ sign ] , digits ] ;
sign = "-" | "+" ;
digits = digit , { digit | "_" , digit } ;
digit = "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" | "8" | "9" ;
extra spaces = ? \s* ? ;
See also String#to_r.
Returns true if argument is optional.
tobj = WIN32OLE_TYPE.new('Microsoft Excel 9.0 Object Library', 'Workbook') method = WIN32OLE_METHOD.new(tobj, 'SaveAs') param1 = method.params[0] puts "#{param1.name} #{param1.optional?}" # => Filename true
Sends a OPTIONS request to the path and gets a response, as an HTTPResponse object.
Create on demand parser.
Returns the parser to be used.
Unless a URI::Parser is defined, DEFAULT_PARSER is used.
Merge a set of command options with the set of default options (without modifying the default option hash).