Results for: "remove_const"

Invoked as a callback whenever a singleton method is removed from the receiver.

module Chatty
  def Chatty.singleton_method_removed(id)
    puts "Removing #{id.id2name}"
  end
  def self.one()     end
  def two()          end
  def Chatty.three() end
  class << self
    remove_method :three
    remove_method :one
  end
end

produces:

Removing three
Removing one

Convert source_string and return destination_string.

source_string is assumed as a part of source. i.e. :partial_input=>true is specified internally. finish method should be used last.

ec = Encoding::Converter.new("utf-8", "euc-jp")
puts ec.convert("\u3042").dump     #=> "\xA4\xA2"
puts ec.finish.dump                #=> ""

ec = Encoding::Converter.new("euc-jp", "utf-8")
puts ec.convert("\xA4").dump       #=> ""
puts ec.convert("\xA2").dump       #=> "\xE3\x81\x82"
puts ec.finish.dump                #=> ""

ec = Encoding::Converter.new("utf-8", "iso-2022-jp")
puts ec.convert("\xE3").dump       #=> "".force_encoding("ISO-2022-JP")
puts ec.convert("\x81").dump       #=> "".force_encoding("ISO-2022-JP")
puts ec.convert("\x82").dump       #=> "\e$B$\"".force_encoding("ISO-2022-JP")
puts ec.finish.dump                #=> "\e(B".force_encoding("ISO-2022-JP")

If a conversion error occur, Encoding::UndefinedConversionError or Encoding::InvalidByteSequenceError is raised. Encoding::Converter#convert doesn’t supply methods to recover or restart from these exceptions. When you want to handle these conversion errors, use Encoding::Converter#primitive_convert.

If object is an Array object, returns object.

Otherwise if object responds to :to_ary, calls object.to_ary and returns the result.

Returns nil if object does not respond to :to_ary

Raises an exception unless object.to_ary returns an Array object.

Calls the block with each repeated combination of length n of the elements of self; each combination is an Array; returns self. The order of the combinations is indeterminate.

When a block and a positive Integer argument n are given, calls the block with each n-tuple repeated combination of the elements of self. The number of combinations is (n+1)(n+2)/2.

n = 1:

a = [0, 1, 2]
a.repeated_combination(1) {|combination| p combination }

Output:

[0]
[1]
[2]

n = 2:

a.repeated_combination(2) {|combination| p combination }

Output:

[0, 0]
[0, 1]
[0, 2]
[1, 1]
[1, 2]
[2, 2]

If n is zero, calls the block once with an empty Array.

If n is negative, does not call the block:

a.repeated_combination(-1) {|combination| fail 'Cannot happen' }

Returns a new Enumerator if no block given:

a = [0, 1, 2]
a.repeated_combination(2) # => #<Enumerator: [0, 1, 2]:combination(2)>

Using Enumerators, it’s convenient to show the combinations and counts for some values of n:

e = a.repeated_combination(0)
e.size # => 1
e.to_a # => [[]]
e = a.repeated_combination(1)
e.size # => 3
e.to_a # => [[0], [1], [2]]
e = a.repeated_combination(2)
e.size # => 6
e.to_a # => [[0, 0], [0, 1], [0, 2], [1, 1], [1, 2], [2, 2]]

If object is an Integer object, returns object.

Integer.try_convert(1) # => 1

Otherwise if object responds to :to_int, calls object.to_int and returns the result.

Integer.try_convert(1.25) # => 1

Returns nil if object does not respond to :to_int

Integer.try_convert([]) # => nil

Raises an exception unless object.to_int returns an Integer object.

If object is a String object, returns object.

Otherwise if object responds to :to_str, calls object.to_str and returns the result.

Returns nil if object does not respond to :to_str.

Raises an exception unless object.to_str returns a String object.

Attempts to convert object into an IO object via method to_io; returns the new IO object if successful, or nil otherwise:

IO.try_convert(STDOUT)   # => #<IO:<STDOUT>>
IO.try_convert(ARGF)     # => #<IO:<STDIN>>
IO.try_convert('STDOUT') # => nil

IO.copy_stream copies src to dst. src and dst is either a filename or an IO-like object. IO-like object for src should have readpartial or read method. IO-like object for dst should have write method. (Specialized mechanisms, such as sendfile system call, may be used on appropriate situation.)

This method returns the number of bytes copied.

If optional arguments are not given, the start position of the copy is the beginning of the filename or the current file offset of the IO. The end position of the copy is the end of file.

If copy_length is given, No more than copy_length bytes are copied.

If src_offset is given, it specifies the start position of the copy.

When src_offset is specified and src is an IO, IO.copy_stream doesn’t move the current file offset.

Try to convert obj into a Regexp, using to_regexp method. Returns converted regexp or nil if obj cannot be converted for any reason.

Regexp.try_convert(/re/)         #=> /re/
Regexp.try_convert("re")         #=> nil

o = Object.new
Regexp.try_convert(o)            #=> nil
def o.to_regexp() /foo/ end
Regexp.try_convert(o)            #=> /foo/

Returns an address of the socket suitable for connect in the local machine.

This method returns self.local_address, except following condition.

• IPv4 unspecified address (0.0.0.0) is replaced by IPv4 loopback address (127.0.0.1).

• IPv6 unspecified address (::) is replaced by IPv6 loopback address (::1).

If the local address is not suitable for connect, SocketError is raised. IPv4 and IPv6 address which port is 0 is not suitable for connect. Unix domain socket which has no path is not suitable for connect.

Addrinfo.tcp("0.0.0.0", 0).listen {|serv|
  p serv.connect_address #=> #<Addrinfo: 127.0.0.1:53660 TCP>
  serv.connect_address.connect {|c|
    s, _ = serv.accept
    p [c, s] #=> [#<Socket:fd 4>, #<Socket:fd 6>]
  }
}

This method is defined for backward compatibility.

If obj is a Hash object, returns obj.

Otherwise if obj responds to :to_hash, calls obj.to_hash and returns the result.

Returns nil if obj does not respond to :to_hash

Raises an exception unless obj.to_hash returns a Hash object.

Returns the value that determines whether unconverted fields are to be available; used for parsing; see {Option unconverted_fields}:

CSV.new('').unconverted_fields? # => nil

Returns an Array containing header converters; used for parsing; see Header Converters:

CSV.new('').header_converters # => []

Notes that you need to call +Ractor.make_shareable(CSV::HeaderConverters)+ on the main Ractor to use this method.

The block need not return a String object:

csv = CSV.open(path, headers: true)
csv.header_convert {|header, field_info| header.to_sym }
table = csv.read
table.headers # => [:Name, :Value]

If converter_name is given, the block is not called:

csv = CSV.open(path, headers: true)
csv.header_convert(:downcase) {|header, field_info| fail 'Cannot happen' }
table = csv.read
table.headers # => ["name", "value"]

Raises a parse-time exception if converter_name is not the name of a built-in field converter:

csv = CSV.open(path, headers: true)
csv.header_convert(:nosuch)
# Raises NoMethodError (undefined method `arity' for nil:NilClass)
csv.read

Processes fields with @converters, or @header_converters if headers is passed as true, returning the converted field set. Any converter that changes the field into something other than a String halts the pipeline of conversion for that field. This is primarily an efficiency shortcut.

Enters exclusive section and executes the block. Leaves the exclusive section automatically when the block exits. See example under MonitorMixin.

Copies stream src to dest. src must respond to read(n) and dest must respond to write(str).

Copies stream src to dest. src must respond to read(n) and dest must respond to write(str).

Returns the convertible integer type of the given type. You may optionally specify additional headers to search in for the type. convertible means actually the same type, or typedef’d from the same type.

If the type is an integer type and the convertible type is found, the following macros are passed as preprocessor constants to the compiler using the type name, in uppercase.

• TYPEOF_, followed by the type name, followed by =X where “X” is the found convertible type name.

• TYP2NUM and NUM2TYP, where TYP is the type name in uppercase with replacing an _t suffix with “T”, followed by =X where “X” is the macro name to convert type to an Integer object, and vice versa.

For example, if foobar_t is defined as unsigned long, then convertible_int("foobar_t") would return “unsigned long”, and define these macros:

#define TYPEOF_FOOBAR_T unsigned long
#define FOOBART2NUM ULONG2NUM
#define NUM2FOOBART NUM2ULONG