Raised when the interrupt signal is received, typically because the user has pressed Control-C (on most posix platforms). As such, it is a subclass of SignalException.
begin puts "Press ctrl-C when you get bored" loop {} rescue Interrupt => e puts "Note: You will typically use Signal.trap instead." end
produces:
Press ctrl-C when you get bored
then waits until it is interrupted with Control-C and then prints:
Note: You will typically use Signal.trap instead.
Raised when encountering an object that is not of the expected type.
[1, 2, 3].first("two")
raises the exception:
TypeError: no implicit conversion of String into Integer
Raised when the given index is invalid.
a = [:foo, :bar] a.fetch(0) #=> :foo a[4] #=> nil a.fetch(4) #=> IndexError: index 4 outside of array bounds: -2...2
Raised when the specified key is not found. It is a subclass of IndexError.
h = {"foo" => :bar} h.fetch("foo") #=> :bar h.fetch("baz") #=> KeyError: key not found: "baz"
ScriptError is the superclass for errors raised when a script can not be executed because of a LoadError, NotImplementedError or a SyntaxError. Note these type of ScriptErrors are not StandardError and will not be rescued unless it is specified explicitly (or its ancestor Exception).
Raised when encountering Ruby code with an invalid syntax.
eval("1+1=2")
raises the exception:
SyntaxError: (eval):1: syntax error, unexpected '=', expecting $end
Raised when a file required (a Ruby script, extension library, …) fails to load.
require 'this/file/does/not/exist'
raises the exception:
LoadError: no such file to load -- this/file/does/not/exist
Raised when a feature is not implemented on the current platform. For example, methods depending on the fsync or fork system calls may raise this exception if the underlying operating system or Ruby runtime does not support them.
Note that if fork raises a NotImplementedError, then respond_to?(:fork) returns false.
Raised when a given name is invalid or undefined.
puts foo
raises the exception:
NameError: undefined local variable or method `foo' for main:Object
Since constant names must start with a capital:
Integer.const_set :answer, 42
raises the exception:
NameError: wrong constant name answer
Raised when a method is called on a receiver which doesn’t have it defined and also fails to respond with method_missing.
"hello".to_ary
raises the exception:
NoMethodError: undefined method `to_ary' for "hello":String
A generic error class raised when an invalid operation is attempted. Kernel#raise will raise a RuntimeError if no Exception class is specified.
raise "ouch"
raises the exception:
RuntimeError: ouch
No longer used by internal code.
Raised when memory allocation fails.
EncodingError is the base class for encoding errors.
SystemCallError is the base class for all low-level platform-dependent errors.
The errors available on the current platform are subclasses of SystemCallError and are defined in the Errno module.
File.open("does/not/exist")
raises the exception:
Errno::ENOENT: No such file or directory - does/not/exist
A rational number can be represented as a pair of integer numbers: a/b (b>0), where a is the numerator and b is the denominator. Integer a equals rational a/1 mathematically.
You can create a Rational object explicitly with:
You can convert certain objects to Rationals with:
Method Rational.
Examples
Rational(1) #=> (1/1) Rational(2, 3) #=> (2/3) Rational(4, -6) #=> (-2/3) # Reduced. 3.to_r #=> (3/1) 2/3r #=> (2/3)
You can also create rational objects from floating-point numbers or strings.
Rational(0.3) #=> (5404319552844595/18014398509481984) Rational('0.3') #=> (3/10) Rational('2/3') #=> (2/3) 0.3.to_r #=> (5404319552844595/18014398509481984) '0.3'.to_r #=> (3/10) '2/3'.to_r #=> (2/3) 0.3.rationalize #=> (3/10)
A rational object is an exact number, which helps you to write programs without any rounding errors.
10.times.inject(0) {|t| t + 0.1 } #=> 0.9999999999999999 10.times.inject(0) {|t| t + Rational('0.1') } #=> (1/1)
However, when an expression includes an inexact component (numerical value or operation), it will produce an inexact result.
Rational(10) / 3 #=> (10/3) Rational(10) / 3.0 #=> 3.3333333333333335 Rational(-8) ** Rational(1, 3) #=> (1.0000000000000002+1.7320508075688772i)
A Range object represents a collection of values that are between given begin and end values.
You can create an Range object explicitly with:
# Ranges that use '..' to include the given end value. (1..4).to_a # => [1, 2, 3, 4] ('a'..'d').to_a # => ["a", "b", "c", "d"] # Ranges that use '...' to exclude the given end value. (1...4).to_a # => [1, 2, 3] ('a'...'d').to_a # => ["a", "b", "c"]
A range may be created using method Range.new:
# Ranges that by default include the given end value. Range.new(1, 4).to_a # => [1, 2, 3, 4] Range.new('a', 'd').to_a # => ["a", "b", "c", "d"] # Ranges that use third argument +exclude_end+ to exclude the given end value. Range.new(1, 4, true).to_a # => [1, 2, 3] Range.new('a', 'd', true).to_a # => ["a", "b", "c"]
A beginless range has a definite end value, but a nil begin value. Such a range includes all values up to the end value.
r = (..4) # => nil..4 r.begin # => nil r.include?(-50) # => true r.include?(4) # => true r = (...4) # => nil...4 r.include?(4) # => false Range.new(nil, 4) # => nil..4 Range.new(nil, 4, true) # => nil...4
A beginless range may be used to slice an array:
a = [1, 2, 3, 4] r = (..2) # => nil...2 a[r] # => [1, 2]
Method each for a beginless range raises an exception.
An endless range has a definite begin value, but a nil end value. Such a range includes all values from the begin value.
r = (1..) # => 1.. r.end # => nil r.include?(50) # => true Range.new(1, nil) # => 1..
The literal for an endless range may be written with either two dots or three. The range has the same elements, either way. But note that the two are not equal:
r0 = (1..) # => 1.. r1 = (1...) # => 1... r0.begin == r1.begin # => true r0.end == r1.end # => true r0 == r1 # => false
An endless range may be used to slice an array:
a = [1, 2, 3, 4] r = (2..) # => 2.. a[r] # => [3, 4]
Method each for an endless range calls the given block indefinitely:
a = [] r = (1..) r.each do |i| a.push(i) if i.even? break if i > 10 end a # => [2, 4, 6, 8, 10]
An object may be put into a range if its class implements instance method <=>. Ruby core classes that do so include Array, Complex, File::Stat, Float, Integer, Kernel, Module, Numeric, Rational, String, Symbol, and Time.
Example:
t0 = Time.now # => 2021-09-19 09:22:48.4854986 -0500 t1 = Time.now # => 2021-09-19 09:22:56.0365079 -0500 t2 = Time.now # => 2021-09-19 09:23:08.5263283 -0500 (t0..t2).include?(t1) # => true (t0..t1).include?(t2) # => false
A range can be iterated over only if its elements implement instance method succ. Ruby core classes that do so include Integer, String, and Symbol (but not the other classes mentioned above).
Iterator methods include:
Included from module Enumerable: each_entry, each_with_index, each_with_object, each_slice, each_cons, and reverse_each.
Example:
a = [] (1..4).each {|i| a.push(i) } a # => [1, 2, 3, 4]
A user-defined class that is to be used in a range must implement instance <=>; see Integer#<=>. To make iteration available, it must also implement instance method succ; see Integer#succ.
The class below implements both <=> and succ, and so can be used both to construct ranges and to iterate over them. Note that the Comparable module is included so the == method is defined in terms of <=>.
# Represent a string of 'X' characters. class Xs include Comparable attr_accessor :length def initialize(n) @length = n end def succ Xs.new(@length + 1) end def <=>(other) @length <=> other.length end def to_s sprintf "%2d #{inspect}", @length end def inspect 'X' * @length end end r = Xs.new(3)..Xs.new(6) #=> XXX..XXXXXX r.to_a #=> [XXX, XXXX, XXXXX, XXXXXX] r.include?(Xs.new(5)) #=> true r.include?(Xs.new(7)) #=> false
First, what’s elsewhere. Class Range:
Inherits from class Object.
Includes module Enumerable, which provides dozens of additional methods.
Here, class Range provides methods that are useful for:
::newReturns a new range.
beginReturns the begin value given for self.
bsearchReturns an element from self selected by a binary search.
countReturns a count of elements in self.
endReturns the end value given for self.
exclude_end?Returns whether the end object is excluded.
firstReturns the first elements of self.
hashReturns the integer hash code.
lastReturns the last elements of self.
maxReturns the maximum values in self.
minReturns the minimum values in self.
minmaxReturns the minimum and maximum values in self.
sizeReturns the count of elements in self.
===Returns whether the given object is between the begin and end values.
cover?Returns whether a given object is within self.
%Requires argument n; calls the block with each n-th element of self.
eachCalls the block with each element of self.
stepTakes optional argument n (defaults to 1); calls the block with each n-th element of self.
SocketError is the error class for socket.
StringScanner provides for lexical scanning operations on a String. Here is an example of its usage:
s = StringScanner.new('This is an example string') s.eos? # -> false p s.scan(/\w+/) # -> "This" p s.scan(/\w+/) # -> nil p s.scan(/\s+/) # -> " " p s.scan(/\s+/) # -> nil p s.scan(/\w+/) # -> "is" s.eos? # -> false p s.scan(/\s+/) # -> " " p s.scan(/\w+/) # -> "an" p s.scan(/\s+/) # -> " " p s.scan(/\w+/) # -> "example" p s.scan(/\s+/) # -> " " p s.scan(/\w+/) # -> "string" s.eos? # -> true p s.scan(/\s+/) # -> nil p s.scan(/\w+/) # -> nil
Scanning a string means remembering the position of a scan pointer, which is just an index. The point of scanning is to move forward a bit at a time, so matches are sought after the scan pointer; usually immediately after it.
Given the string “test string”, here are the pertinent scan pointer positions:
t e s t s t r i n g
0 1 2 ... 1
0
When you scan for a pattern (a regular expression), the match must occur at the character after the scan pointer. If you use scan_until, then the match can occur anywhere after the scan pointer. In both cases, the scan pointer moves just beyond the last character of the match, ready to scan again from the next character onwards. This is demonstrated by the example above.
Method Categories There are other methods besides the plain scanners. You can look ahead in the string without actually scanning. You can access the most recent match. You can modify the string being scanned, reset or terminate the scanner, find out or change the position of the scan pointer, skip ahead, and so on.
beginning_of_line? (bol?)
There are aliases to several of the methods.
Raised when OLE processing failed.
EX:
obj = WIN32OLE.new("NonExistProgID")
raises the exception:
WIN32OLERuntimeError: unknown OLE server: `NonExistProgID'
HRESULT error code:0x800401f3
Invalid class string
Raised when an IO operation fails.
File.open("/etc/hosts") {|f| f << "example"} #=> IOError: not opened for writing File.open("/etc/hosts") {|f| f.close; f.read } #=> IOError: closed stream
Note that some IO failures raise SystemCallErrors and these are not subclasses of IOError:
File.open("does/not/exist") #=> Errno::ENOENT: No such file or directory - does/not/exist
Raised by some IO operations when reaching the end of file. Many IO methods exist in two forms,
one that returns nil when the end of file is reached, the other raises EOFError.
EOFError is a subclass of IOError.
file = File.open("/etc/hosts") file.read file.gets #=> nil file.readline #=> EOFError: end of file reached
ARGF is a stream designed for use in scripts that process files given as command-line arguments or passed in via STDIN.
The arguments passed to your script are stored in the ARGV Array, one argument per element. ARGF assumes that any arguments that aren’t filenames have been removed from ARGV. For example:
$ ruby argf.rb --verbose file1 file2 ARGV #=> ["--verbose", "file1", "file2"] option = ARGV.shift #=> "--verbose" ARGV #=> ["file1", "file2"]
You can now use ARGF to work with a concatenation of each of these named files. For instance, ARGF.read will return the contents of file1 followed by the contents of file2.
After a file in ARGV has been read ARGF removes it from the Array. Thus, after all files have been read ARGV will be empty.
You can manipulate ARGV yourself to control what ARGF operates on. If you remove a file from ARGV, it is ignored by ARGF; if you add files to ARGV, they are treated as if they were named on the command line. For example:
ARGV.replace ["file1"] ARGF.readlines # Returns the contents of file1 as an Array ARGV #=> [] ARGV.replace ["file2", "file3"] ARGF.read # Returns the contents of file2 and file3
If ARGV is empty, ARGF acts as if it contained STDIN, i.e. the data piped to your script. For example:
$ echo "glark" | ruby -e 'p ARGF.read' "glark\n"