Results for: "Logger"

SocketError

SocketError is the error class for socket.

StringScanner

StringScanner provides for lexical scanning operations on a String. Here is an example of its usage:

require 'strscan'

s = StringScanner.new('This is an example string')
s.eos?               # -> false

p s.scan(/\w+/)      # -> "This"
p s.scan(/\w+/)      # -> nil
p s.scan(/\s+/)      # -> " "
p s.scan(/\s+/)      # -> nil
p s.scan(/\w+/)      # -> "is"
s.eos?               # -> false

p s.scan(/\s+/)      # -> " "
p s.scan(/\w+/)      # -> "an"
p s.scan(/\s+/)      # -> " "
p s.scan(/\w+/)      # -> "example"
p s.scan(/\s+/)      # -> " "
p s.scan(/\w+/)      # -> "string"
s.eos?               # -> true

p s.scan(/\s+/)      # -> nil
p s.scan(/\w+/)      # -> nil

Scanning a string means remembering the position of a scan pointer, which is just an index. The point of scanning is to move forward a bit at a time, so matches are sought after the scan pointer; usually immediately after it.

Given the string “test string”, here are the pertinent scan pointer positions:

  t e s t   s t r i n g
0 1 2 ...             1
                      0

When you scan for a pattern (a regular expression), the match must occur at the character after the scan pointer. If you use scan_until, then the match can occur anywhere after the scan pointer. In both cases, the scan pointer moves just beyond the last character of the match, ready to scan again from the next character onwards. This is demonstrated by the example above.

Method Categories

There are other methods besides the plain scanners. You can look ahead in the string without actually scanning. You can access the most recent match. You can modify the string being scanned, reset or terminate the scanner, find out or change the position of the scan pointer, skip ahead, and so on.

Advancing the Scan Pointer

Looking Ahead

Finding Where we Are

Setting Where we Are

Match Data

Miscellaneous

There are aliases to several of the methods.

OLEProperty

OLEProperty helper class of Property with arguments.

IOError

Raised when an IO operation fails.

File.open("/etc/hosts") {|f| f << "example"}
  #=> IOError: not opened for writing

File.open("/etc/hosts") {|f| f.close; f.read }
  #=> IOError: closed stream

Note that some IO failures raise SystemCallErrors and these are not subclasses of IOError:

File.open("does/not/exist")
  #=> Errno::ENOENT: No such file or directory - does/not/exist

EOFError

Raised by some IO operations when reaching the end of file. Many IO methods exist in two forms,

one that returns nil when the end of file is reached, the other raises EOFError.

EOFError is a subclass of IOError.

file = File.open("/etc/hosts")
file.read
file.gets     #=> nil
file.readline #=> EOFError: end of file reached
file.close

ERB

ERB – Ruby Templating

Introduction

ERB provides an easy to use but powerful templating system for Ruby. Using ERB, actual Ruby code can be added to any plain text document for the purposes of generating document information details and/or flow control.

A very simple example is this:

require 'erb'

x = 42
template = ERB.new <<-EOF
  The value of x is: <%= x %>
EOF
puts template.result(binding)

Prints: The value of x is: 42

More complex examples are given below.

Recognized Tags

ERB recognizes certain tags in the provided template and converts them based on the rules below:

<% Ruby code -- inline with output %>
<%= Ruby expression -- replace with result %>
<%# comment -- ignored -- useful in testing %> (`<% #` doesn't work. Don't use Ruby comments.)
% a line of Ruby code -- treated as <% line %> (optional -- see ERB.new)
%% replaced with % if first thing on a line and % processing is used
<%% or %%> -- replace with <% or %> respectively

All other text is passed through ERB filtering unchanged.

Options

There are several settings you can change when you use ERB:

See the ERB.new and ERB#result methods for more detail.

Character encodings

ERB (or Ruby code generated by ERB) returns a string in the same character encoding as the input string. When the input string has a magic comment, however, it returns a string in the encoding specified by the magic comment.

# -*- coding: utf-8 -*-
require 'erb'

template = ERB.new <<EOF
<%#-*- coding: Big5 -*-%>
  \_\_ENCODING\_\_ is <%= \_\_ENCODING\_\_ %>.
EOF
puts template.result

Prints: _ENCODING_ is Big5.

Examples

Plain Text

ERB is useful for any generic templating situation. Note that in this example, we use the convenient “% at start of line” tag, and we quote the template literally with %q{...} to avoid trouble with the backslash.

require "erb"

# Create template.
template = %q{
  From:  James Edward Gray II <james@grayproductions.net>
  To:  <%= to %>
  Subject:  Addressing Needs

  <%= to[/\w+/] %>:

  Just wanted to send a quick note assuring that your needs are being
  addressed.

  I want you to know that my team will keep working on the issues,
  especially:

  <%# ignore numerous minor requests -- focus on priorities %>
  % priorities.each do |priority|
    * <%= priority %>
  % end

  Thanks for your patience.

  James Edward Gray II
}.gsub(/^  /, '')

message = ERB.new(template, trim_mode: "%<>")

# Set up template data.
to = "Community Spokesman <spokesman@ruby_community.org>"
priorities = [ "Run Ruby Quiz",
               "Document Modules",
               "Answer Questions on Ruby Talk" ]

# Produce result.
email = message.result
puts email

Generates:

From:  James Edward Gray II <james@grayproductions.net>
To:  Community Spokesman <spokesman@ruby_community.org>
Subject:  Addressing Needs

Community:

Just wanted to send a quick note assuring that your needs are being addressed.

I want you to know that my team will keep working on the issues, especially:

    * Run Ruby Quiz
    * Document Modules
    * Answer Questions on Ruby Talk

Thanks for your patience.

James Edward Gray II

Ruby in HTML

ERB is often used in .rhtml files (HTML with embedded Ruby). Notice the need in this example to provide a special binding when the template is run, so that the instance variables in the Product object can be resolved.

require "erb"

# Build template data class.
class Product
  def initialize( code, name, desc, cost )
    @code = code
    @name = name
    @desc = desc
    @cost = cost

    @features = [ ]
  end

  def add_feature( feature )
    @features << feature
  end

  # Support templating of member data.
  def get_binding
    binding
  end

  # ...
end

# Create template.
template = %{
  <html>
    <head><title>Ruby Toys -- <%= @name %></title></head>
    <body>

      <h1><%= @name %> (<%= @code %>)</h1>
      <p><%= @desc %></p>

      <ul>
        <% @features.each do |f| %>
          <li><b><%= f %></b></li>
        <% end %>
      </ul>

      <p>
        <% if @cost < 10 %>
          <b>Only <%= @cost %>!!!</b>
        <% else %>
           Call for a price, today!
        <% end %>
      </p>

    </body>
  </html>
}.gsub(/^  /, '')

rhtml = ERB.new(template)

# Set up template data.
toy = Product.new( "TZ-1002",
                   "Rubysapien",
                   "Geek's Best Friend!  Responds to Ruby commands...",
                   999.95 )
toy.add_feature("Listens for verbal commands in the Ruby language!")
toy.add_feature("Ignores Perl, Java, and all C variants.")
toy.add_feature("Karate-Chop Action!!!")
toy.add_feature("Matz signature on left leg.")
toy.add_feature("Gem studded eyes... Rubies, of course!")

# Produce result.
rhtml.run(toy.get_binding)

Generates (some blank lines removed):

<html>
  <head><title>Ruby Toys -- Rubysapien</title></head>
  <body>

    <h1>Rubysapien (TZ-1002)</h1>
    <p>Geek's Best Friend!  Responds to Ruby commands...</p>

    <ul>
        <li><b>Listens for verbal commands in the Ruby language!</b></li>
        <li><b>Ignores Perl, Java, and all C variants.</b></li>
        <li><b>Karate-Chop Action!!!</b></li>
        <li><b>Matz signature on left leg.</b></li>
        <li><b>Gem studded eyes... Rubies, of course!</b></li>
    </ul>

    <p>
         Call for a price, today!
    </p>

  </body>
</html>

Notes

There are a variety of templating solutions available in various Ruby projects. For example, RDoc, distributed with Ruby, uses its own template engine, which can be reused elsewhere.

Other popular engines could be found in the corresponding Category of The Ruby Toolbox.

OptionParser

OptionParser

New to OptionParser?

See the Tutorial.

Introduction

OptionParser is a class for command-line option analysis. It is much more advanced, yet also easier to use, than GetoptLong, and is a more Ruby-oriented solution.

Features

  1. The argument specification and the code to handle it are written in the same place.

  2. It can output an option summary; you don’t need to maintain this string separately.

  3. Optional and mandatory arguments are specified very gracefully.

  4. Arguments can be automatically converted to a specified class.

  5. Arguments can be restricted to a certain set.

All of these features are demonstrated in the examples below. See make_switch for full documentation.

Minimal example 

require 'optparse'

options = {}
OptionParser.new do |parser|
  parser.banner = "Usage: example.rb [options]"

  parser.on("-v", "--[no-]verbose", "Run verbosely") do |v|
    options[:verbose] = v
  end
end.parse!

p options
p ARGV

Generating Help

OptionParser can be used to automatically generate help for the commands you write:

require 'optparse'

Options = Struct.new(:name)

class Parser
  def self.parse(options)
    args = Options.new("world")

    opt_parser = OptionParser.new do |parser|
      parser.banner = "Usage: example.rb [options]"

      parser.on("-nNAME", "--name=NAME", "Name to say hello to") do |n|
        args.name = n
      end

      parser.on("-h", "--help", "Prints this help") do
        puts parser
        exit
      end
    end

    opt_parser.parse!(options)
    return args
  end
end
options = Parser.parse %w[--help]

#=>
   # Usage: example.rb [options]
   #     -n, --name=NAME                  Name to say hello to
   #     -h, --help                       Prints this help

Required Arguments

For options that require an argument, option specification strings may include an option name in all caps. If an option is used without the required argument, an exception will be raised.

require 'optparse'

options = {}
OptionParser.new do |parser|
  parser.on("-r", "--require LIBRARY",
            "Require the LIBRARY before executing your script") do |lib|
    puts "You required #{lib}!"
  end
end.parse!

Used:

$ ruby optparse-test.rb -r
optparse-test.rb:9:in `<main>': missing argument: -r (OptionParser::MissingArgument)
$ ruby optparse-test.rb -r my-library
You required my-library!

Type Coercion

OptionParser supports the ability to coerce command line arguments into objects for us.

OptionParser comes with a few ready-to-use kinds of type coercion. They are:

We can also add our own coercions, which we will cover below.

Using Built-in Conversions

As an example, the built-in Time conversion is used. The other built-in conversions behave in the same way. OptionParser will attempt to parse the argument as a Time. If it succeeds, that time will be passed to the handler block. Otherwise, an exception will be raised.

require 'optparse'
require 'optparse/time'
OptionParser.new do |parser|
  parser.on("-t", "--time [TIME]", Time, "Begin execution at given time") do |time|
    p time
  end
end.parse!

Used:

$ ruby optparse-test.rb  -t nonsense
... invalid argument: -t nonsense (OptionParser::InvalidArgument)
$ ruby optparse-test.rb  -t 10-11-12
2010-11-12 00:00:00 -0500
$ ruby optparse-test.rb  -t 9:30
2014-08-13 09:30:00 -0400

Creating Custom Conversions

The accept method on OptionParser may be used to create converters. It specifies which conversion block to call whenever a class is specified. The example below uses it to fetch a User object before the on handler receives it.

require 'optparse'

User = Struct.new(:id, :name)

def find_user id
  not_found = ->{ raise "No User Found for id #{id}" }
  [ User.new(1, "Sam"),
    User.new(2, "Gandalf") ].find(not_found) do |u|
    u.id == id
  end
end

op = OptionParser.new
op.accept(User) do |user_id|
  find_user user_id.to_i
end

op.on("--user ID", User) do |user|
  puts user
end

op.parse!

Used:

$ ruby optparse-test.rb --user 1
#<struct User id=1, name="Sam">
$ ruby optparse-test.rb --user 2
#<struct User id=2, name="Gandalf">
$ ruby optparse-test.rb --user 3
optparse-test.rb:15:in `block in find_user': No User Found for id 3 (RuntimeError)

Store options to a Hash

The into option of order, parse and so on methods stores command line options into a Hash.

require 'optparse'

options = {}
OptionParser.new do |parser|
  parser.on('-a')
  parser.on('-b NUM', Integer)
  parser.on('-v', '--verbose')
end.parse!(into: options)

p options

Used:

$ ruby optparse-test.rb -a
{:a=>true}
$ ruby optparse-test.rb -a -v
{:a=>true, :verbose=>true}
$ ruby optparse-test.rb -a -b 100
{:a=>true, :b=>100}

Complete example

The following example is a complete Ruby program. You can run it and see the effect of specifying various options. This is probably the best way to learn the features of optparse.

require 'optparse'
require 'optparse/time'
require 'ostruct'
require 'pp'

class OptparseExample
  Version = '1.0.0'

  CODES = %w[iso-2022-jp shift_jis euc-jp utf8 binary]
  CODE_ALIASES = { "jis" => "iso-2022-jp", "sjis" => "shift_jis" }

  class ScriptOptions
    attr_accessor :library, :inplace, :encoding, :transfer_type,
                  :verbose, :extension, :delay, :time, :record_separator,
                  :list

    def initialize
      self.library = []
      self.inplace = false
      self.encoding = "utf8"
      self.transfer_type = :auto
      self.verbose = false
    end

    def define_options(parser)
      parser.banner = "Usage: example.rb [options]"
      parser.separator ""
      parser.separator "Specific options:"

      # add additional options
      perform_inplace_option(parser)
      delay_execution_option(parser)
      execute_at_time_option(parser)
      specify_record_separator_option(parser)
      list_example_option(parser)
      specify_encoding_option(parser)
      optional_option_argument_with_keyword_completion_option(parser)
      boolean_verbose_option(parser)

      parser.separator ""
      parser.separator "Common options:"
      # No argument, shows at tail.  This will print an options summary.
      # Try it and see!
      parser.on_tail("-h", "--help", "Show this message") do
        puts parser
        exit
      end
      # Another typical switch to print the version.
      parser.on_tail("--version", "Show version") do
        puts Version
        exit
      end
    end

    def perform_inplace_option(parser)
      # Specifies an optional option argument
      parser.on("-i", "--inplace [EXTENSION]",
                "Edit ARGV files in place",
                "(make backup if EXTENSION supplied)") do |ext|
        self.inplace = true
        self.extension = ext || ''
        self.extension.sub!(/\A\.?(?=.)/, ".")  # Ensure extension begins with dot.
      end
    end

    def delay_execution_option(parser)
      # Cast 'delay' argument to a Float.
      parser.on("--delay N", Float, "Delay N seconds before executing") do |n|
        self.delay = n
      end
    end

    def execute_at_time_option(parser)
      # Cast 'time' argument to a Time object.
      parser.on("-t", "--time [TIME]", Time, "Begin execution at given time") do |time|
        self.time = time
      end
    end

    def specify_record_separator_option(parser)
      # Cast to octal integer.
      parser.on("-F", "--irs [OCTAL]", OptionParser::OctalInteger,
                "Specify record separator (default \\0)") do |rs|
        self.record_separator = rs
      end
    end

    def list_example_option(parser)
      # List of arguments.
      parser.on("--list x,y,z", Array, "Example 'list' of arguments") do |list|
        self.list = list
      end
    end

    def specify_encoding_option(parser)
      # Keyword completion.  We are specifying a specific set of arguments (CODES
      # and CODE_ALIASES - notice the latter is a Hash), and the user may provide
      # the shortest unambiguous text.
      code_list = (CODE_ALIASES.keys + CODES).join(', ')
      parser.on("--code CODE", CODES, CODE_ALIASES, "Select encoding",
                "(#{code_list})") do |encoding|
        self.encoding = encoding
      end
    end

    def optional_option_argument_with_keyword_completion_option(parser)
      # Optional '--type' option argument with keyword completion.
      parser.on("--type [TYPE]", [:text, :binary, :auto],
                "Select transfer type (text, binary, auto)") do |t|
        self.transfer_type = t
      end
    end

    def boolean_verbose_option(parser)
      # Boolean switch.
      parser.on("-v", "--[no-]verbose", "Run verbosely") do |v|
        self.verbose = v
      end
    end
  end

  #
  # Return a structure describing the options.
  #
  def parse(args)
    # The options specified on the command line will be collected in
    # *options*.

    @options = ScriptOptions.new
    @args = OptionParser.new do |parser|
      @options.define_options(parser)
      parser.parse!(args)
    end
    @options
  end

  attr_reader :parser, :options
end  # class OptparseExample

example = OptparseExample.new
options = example.parse(ARGV)
pp options # example.options
pp ARGV

Shell Completion

For modern shells (e.g. bash, zsh, etc.), you can use shell completion for command line options.

Further documentation

The above examples, along with the accompanying Tutorial, should be enough to learn how to use this class. If you have any questions, file a ticket at bugs.ruby-lang.org.

SystemStackError

Raised in case of a stack overflow.

def me_myself_and_i
  me_myself_and_i
end
me_myself_and_i

raises the exception:

SystemStackError: stack level too deep

ThreadError

Raised when an invalid operation is attempted on a thread.

For example, when no other thread has been started:

Thread.stop

This will raises the following exception:

ThreadError: stopping only thread
note: use sleep to stop forever

UncaughtThrowError

Raised when throw is called with a tag which does not have corresponding catch block.

throw "foo", "bar"

raises the exception:

UncaughtThrowError: uncaught throw "foo"

Kernel

The Kernel module is included by class Object, so its methods are available in every Ruby object.

The Kernel instance methods are documented in class Object while the module methods are documented here. These methods are called without a receiver and thus can be called in functional form:

sprintf "%.1f", 1.234 #=> "1.2"

What’s Here

Module Kernel provides methods that are useful for:

Converting

Querying

Exiting

Exceptions

IO

Procs

Tracing

Subprocesses

Loading

Yielding

Random Values

Other

Enumerable

What’s Here

Module Enumerable provides methods that are useful to a collection class for:

Methods for Querying

These methods return information about the Enumerable other than the elements themselves:

Methods for Fetching

These methods return entries from the Enumerable, without modifying it:

Leading, trailing, or all elements:

Minimum and maximum value elements:

Groups, slices, and partitions:

Methods for Searching and Filtering

These methods return elements that meet a specified criterion:

Methods for Sorting

These methods return elements in sorted order:

Methods for Iterating

Other Methods

Usage

To use module Enumerable in a collection class:

Example:

class Foo
  include Enumerable
  def each
    yield 1
    yield 1, 2
    yield
  end
end
Foo.new.each_entry{ |element| p element }

Output:

1
[1, 2]
nil

Enumerable in Ruby Classes

These Ruby core classes include (or extend) Enumerable:

These Ruby standard library classes include Enumerable:

Virtually all methods in Enumerable call method #each in the including class:

About the Examples

The example code snippets for the Enumerable methods:

Errno

Ruby exception objects are subclasses of Exception. However, operating systems typically report errors using plain integers. Module Errno is created dynamically to map these operating system errors to Ruby classes, with each error number generating its own subclass of SystemCallError. As the subclass is created in module Errno, its name will start Errno::.

The names of the Errno:: classes depend on the environment in which Ruby runs. On a typical Unix or Windows platform, there are Errno classes such as Errno::EACCES, Errno::EAGAIN, Errno::EINTR, and so on.

The integer operating system error number corresponding to a particular error is available as the class constant Errno::error::Errno.

Errno::EACCES::Errno   #=> 13
Errno::EAGAIN::Errno   #=> 11
Errno::EINTR::Errno    #=> 4

The full list of operating system errors on your particular platform are available as the constants of Errno.

Errno.constants   #=> :E2BIG, :EACCES, :EADDRINUSE, :EADDRNOTAVAIL, ...

Digest

This module provides a framework for message digest libraries.

You may want to look at OpenSSL::Digest as it supports more algorithms.

A cryptographic hash function is a procedure that takes data and returns a fixed bit string: the hash value, also known as digest. Hash functions are also called one-way functions, it is easy to compute a digest from a message, but it is infeasible to generate a message from a digest.

Examples 

require 'digest'

# Compute a complete digest
Digest::SHA256.digest 'message'       #=> "\xABS\n\x13\xE4Y..."

sha256 = Digest::SHA256.new
sha256.digest 'message'               #=> "\xABS\n\x13\xE4Y..."

# Other encoding formats
Digest::SHA256.hexdigest 'message'    #=> "ab530a13e459..."
Digest::SHA256.base64digest 'message' #=> "q1MKE+RZFJgr..."

# Compute digest by chunks
md5 = Digest::MD5.new
md5.update 'message1'
md5 << 'message2'                     # << is an alias for update

md5.hexdigest                         #=> "94af09c09bb9..."

# Compute digest for a file
sha256 = Digest::SHA256.file 'testfile'
sha256.hexdigest

Additionally digests can be encoded in “bubble babble” format as a sequence of consonants and vowels which is more recognizable and comparable than a hexadecimal digest.

require 'digest/bubblebabble'

Digest::SHA256.bubblebabble 'message' #=> "xopoh-fedac-fenyh-..."

See the bubble babble specification at web.mit.edu/kenta/www/one/bubblebabble/spec/jrtrjwzi/draft-huima-01.txt.

Digest algorithms

Different digest algorithms (or hash functions) are available:

MD5

See RFC 1321 The MD5 Message-Digest Algorithm

RIPEMD-160

As Digest::RMD160. See homes.esat.kuleuven.be/~bosselae/ripemd160.html.

SHA1

See FIPS 180 Secure Hash Standard.

SHA2 family

See FIPS 180 Secure Hash Standard which defines the following algorithms:

  • SHA512

  • SHA384

  • SHA256

The latest versions of the FIPS publications can be found here: csrc.nist.gov/publications/PubsFIPS.html.

Gem

RubyGems is the Ruby standard for publishing and managing third party libraries.

For user documentation, see:

For gem developer documentation see:

Further RubyGems documentation can be found at:

RubyGems Plugins

RubyGems will load plugins in the latest version of each installed gem or $LOAD_PATH. Plugins must be named ‘rubygems_plugin’ (.rb, .so, etc) and placed at the root of your gem’s require_path. Plugins are installed at a special location and loaded on boot.

For an example plugin, see the Graph gem which adds a gem graph command.

RubyGems Defaults, Packaging

RubyGems defaults are stored in lib/rubygems/defaults.rb. If you’re packaging RubyGems or implementing Ruby you can change RubyGems’ defaults.

For RubyGems packagers, provide lib/rubygems/defaults/operating_system.rb and override any defaults from lib/rubygems/defaults.rb.

For Ruby implementers, provide lib/rubygems/defaults/#{RUBY_ENGINE}.rb and override any defaults from lib/rubygems/defaults.rb.

If you need RubyGems to perform extra work on install or uninstall, your defaults override file can set pre/post install and uninstall hooks. See Gem::pre_install, Gem::pre_uninstall, Gem::post_install, Gem::post_uninstall.

Bugs

You can submit bugs to the RubyGems bug tracker on GitHub

Credits

RubyGems is currently maintained by Eric Hodel.

RubyGems was originally developed at RubyConf 2003 by:

Contributors:

(If your name is missing, PLEASE let us know!)

License

See LICENSE.txt for permissions.

Thanks!

-The RubyGems Team

ErrorHighlight

No documentation available

Observable

The Observer pattern (also known as publish/subscribe) provides a simple mechanism for one object to inform a set of interested third-party objects when its state changes.

Mechanism

The notifying class mixes in the Observable module, which provides the methods for managing the associated observer objects.

The observable object must:

An observer subscribes to updates using Observable#add_observer, which also specifies the method called via notify_observers. The default method for notify_observers is update.

Example

The following example demonstrates this nicely. A Ticker, when run, continually receives the stock Price for its @symbol. A Warner is a general observer of the price, and two warners are demonstrated, a WarnLow and a WarnHigh, which print a warning if the price is below or above their set limits, respectively.

The update callback allows the warners to run without being explicitly called. The system is set up with the Ticker and several observers, and the observers do their duty without the top-level code having to interfere.

Note that the contract between publisher and subscriber (observable and observer) is not declared or enforced. The Ticker publishes a time and a price, and the warners receive that. But if you don’t ensure that your contracts are correct, nothing else can warn you.

require "observer"

class Ticker          ### Periodically fetch a stock price.
  include Observable

  def initialize(symbol)
    @symbol = symbol
  end

  def run
    last_price = nil
    loop do
      price = Price.fetch(@symbol)
      print "Current price: #{price}\n"
      if price != last_price
        changed                 # notify observers
        last_price = price
        notify_observers(Time.now, price)
      end
      sleep 1
    end
  end
end

class Price           ### A mock class to fetch a stock price (60 - 140).
  def self.fetch(symbol)
    60 + rand(80)
  end
end

class Warner          ### An abstract observer of Ticker objects.
  def initialize(ticker, limit)
    @limit = limit
    ticker.add_observer(self)
  end
end

class WarnLow < Warner
  def update(time, price)       # callback for observer
    if price < @limit
      print "--- #{time.to_s}: Price below #@limit: #{price}\n"
    end
  end
end

class WarnHigh < Warner
  def update(time, price)       # callback for observer
    if price > @limit
      print "+++ #{time.to_s}: Price above #@limit: #{price}\n"
    end
  end
end

ticker = Ticker.new("MSFT")
WarnLow.new(ticker, 80)
WarnHigh.new(ticker, 120)
ticker.run

Produces:

Current price: 83
Current price: 75
--- Sun Jun 09 00:10:25 CDT 2002: Price below 80: 75
Current price: 90
Current price: 134
+++ Sun Jun 09 00:10:25 CDT 2002: Price above 120: 134
Current price: 134
Current price: 112
Current price: 79
--- Sun Jun 09 00:10:25 CDT 2002: Price below 80: 79

Usage with procs

The #notify_observers method can also be used with +proc+s by using the :call as func parameter.

The following example illustrates the use of a lambda:

require 'observer'

class Ticker
  include Observable

  def run
    # logic to retrieve the price (here 77.0)
    changed
    notify_observers(77.0)
  end
end

ticker = Ticker.new
warner = ->(price) { puts "New price received: #{price}" }
ticker.add_observer(warner, :call)
ticker.run

SecureRandom

Secure random number generator interface.

This library is an interface to secure random number generators which are suitable for generating session keys in HTTP cookies, etc.

You can use this library in your application by requiring it:

require 'securerandom'

It supports the following secure random number generators:

SecureRandom is extended by the Random::Formatter module which defines the following methods:

These methods are usable as class methods of SecureRandom such as SecureRandom.hex.

If a secure random number generator is not available, NotImplementedError is raised.

Enumerator::Generator

Generator

Fiddle::ClearedReferenceError

Cleared reference exception

JSON::ParserError

This exception is raised if a parser error occurs.

JSON::NestingError

This exception is raised if the nesting of parsed data structures is too deep.

JSON::GenericObject

No documentation available

OpenSSL::ConfigError

General error for openssl library configuration files. Including formatting, parsing errors, etc.

Psych::ClassLoader

No documentation available
Previous Next
Search took: 25ms  ·  Total Results: 2737