Receives up to maxlen bytes from socket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The first element of the results, mesg, is the data received. The second element, sender_addrinfo, contains protocol-specific address information of the sender.
When recvfrom(2) returns 0, Socket#recv_nonblock returns nil. In most cases it means the connection was closed, but for UDP connections it may mean an empty packet was received, as the underlying API makes it impossible to distinguish these two cases.
maxlen - the maximum number of bytes to receive from the socket
flags - zero or more of the MSG_ options
outbuf - destination String buffer
opts - keyword hash, supporting ‘exception: false`
# In one file, start this first require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.bind(sockaddr) socket.listen(5) client, client_addrinfo = socket.accept begin # emulate blocking recvfrom pair = client.recvfrom_nonblock(20) rescue IO::WaitReadable IO.select([client]) retry end data = pair[0].chomp puts "I only received 20 bytes '#{data}'" sleep 1 socket.close # In another file, start this second require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.connect(sockaddr) socket.puts "Watch this get cut short!" socket.close
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recvfrom_nonblock fails.
Socket#recvfrom_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recvfrom_nonblock.
By specifying a keyword argument exception to false, you can indicate that recvfrom_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Receives up to maxlen bytes from socket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The result, mesg, is the data received.
When recvfrom(2) returns 0, Socket#recv_nonblock returns nil. In most cases it means the connection was closed, but for UDP connections it may mean an empty packet was received, as the underlying API makes it impossible to distinguish these two cases.
maxlen - the number of bytes to receive from the socket
flags - zero or more of the MSG_ options
buf - destination String buffer
options - keyword hash, supporting ‘exception: false`
serv = TCPServer.new("127.0.0.1", 0) af, port, host, addr = serv.addr c = TCPSocket.new(addr, port) s = serv.accept c.send "aaa", 0 begin # emulate blocking recv. p s.recv_nonblock(10) #=> "aaa" rescue IO::WaitReadable IO.select([s]) retry end
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recv_nonblock fails.
BasicSocket#recv_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recv_nonblock.
By specifying a keyword argument exception to false, you can indicate that recv_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
recvmsg receives a message using recvmsg(2) system call in non-blocking manner.
It is similar to BasicSocket#recvmsg but non-blocking flag is set before the system call and it doesn’t retry the system call.
By specifying a keyword argument exception to false, you can indicate that recvmsg_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Receives up to maxlen bytes from udpsocket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The first element of the results, mesg, is the data received. The second element, sender_inet_addr, is an array to represent the sender address.
When recvfrom(2) returns 0, Socket#recv_nonblock returns nil. In most cases it means the connection was closed, but it may also mean an empty packet was received, as the underlying API makes it impossible to distinguish these two cases.
maxlen - the number of bytes to receive from the socket
flags - zero or more of the MSG_ options
outbuf - destination String buffer
options - keyword hash, supporting ‘exception: false`
require 'socket' s1 = UDPSocket.new s1.bind("127.0.0.1", 0) s2 = UDPSocket.new s2.bind("127.0.0.1", 0) s2.connect(*s1.addr.values_at(3,1)) s1.connect(*s2.addr.values_at(3,1)) s1.send "aaa", 0 begin # emulate blocking recvfrom p s2.recvfrom_nonblock(10) #=> ["aaa", ["AF_INET", 33302, "localhost.localdomain", "127.0.0.1"]] rescue IO::WaitReadable IO.select([s2]) retry end
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recvfrom_nonblock fails.
UDPSocket#recvfrom_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recvfrom_nonblock.
By specifying a keyword argument exception to false, you can indicate that recvfrom_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Returns the size (in bytes) of the rest of the [stored string]:
scanner = StringScanner.new('foobarbaz') scanner.rest # => "foobarbaz" scanner.rest_size # => 9 scanner.pos = 3 scanner.rest # => "barbaz" scanner.rest_size # => 6 scanner.terminate scanner.rest # => "" scanner.rest_size # => 0
Reads at most maxlen bytes from the ARGF stream in non-blocking mode.
Shows version string in packages if Version is defined.
pkgs
package list
Returns a pretty printed object as a string.
See the PP module for more information.
Enters exclusive section.
Leaves exclusive section.
Returns true if this monitor is locked by any thread
Returns true if this monitor is locked by current thread.
Initializes the MonitorMixin after being included in a class or when an object has been extended with the MonitorMixin
Parse a YAML string in yaml. Returns the Psych::Nodes::Stream. This method can handle multiple YAML documents contained in yaml. filename is used in the exception message if a Psych::SyntaxError is raised.
If a block is given, a Psych::Nodes::Document node will be yielded to the block as it’s being parsed.
Raises a Psych::SyntaxError when a YAML syntax error is detected.
Example:
Psych.parse_stream("---\n - a\n - b") # => #<Psych::Nodes::Stream:0x00> Psych.parse_stream("--- a\n--- b") do |node| node # => #<Psych::Nodes::Document:0x00> end begin Psych.parse_stream("--- `", filename: "file.txt") rescue Psych::SyntaxError => ex ex.file # => 'file.txt' ex.message # => "(file.txt): found character that cannot start any token" end
Raises a TypeError when NilClass is passed.
See Psych::Nodes for more information about YAML AST.
Dump a list of objects as separate documents to a document stream.
Example:
Psych.dump_stream("foo\n ", {}) # => "--- ! \"foo\\n \"\n--- {}\n"
Load multiple documents given in yaml. Returns the parsed documents as a list. If a block is given, each document will be converted to Ruby and passed to the block during parsing
Example:
Psych.load_stream("--- foo\n...\n--- bar\n...") # => ['foo', 'bar'] list = [] Psych.load_stream("--- foo\n...\n--- bar\n...") do |ruby| list << ruby end list # => ['foo', 'bar']
Returns the version of libyaml being used
Returns the string which represents the version of zlib library.
Adds a hook that will get run after Gem::Specification.reset is run.
A Gem::Version for the currently running Ruby.
Adds DidYouMean functionality to an error using a given spell checker
Returns true if the contents of files a and b are identical, false otherwise.
Arguments a and b should be interpretable as a path.
FileUtils.identical? and FileUtils.cmp are aliases for FileUtils.compare_file.
Related: FileUtils.compare_stream.