Class

IO::Buffer is a efficient zero-copy buffer for input/output. There are typical use cases:

  • Create an empty buffer with ::new, fill it with buffer using copy or set_value, set_string, get buffer with get_string or write it directly to some file with write.

  • Create a buffer mapped to some string with ::for, then it could be used both for reading with get_string or get_value, and writing (writing will change the source string, too).

  • Create a buffer mapped to some file with ::map, then it could be used for reading and writing the underlying file.

  • Create a string of a fixed size with ::string, then read into it, or modify it using set_value.

Interaction with string and file memory is performed by efficient low-level C mechanisms like ‘memcpy`.

The class is meant to be an utility for implementing more high-level mechanisms like Fiber::Scheduler#io_read and Fiber::Scheduler#io_write and parsing binary protocols.

Examples of Usage

Empty buffer:

buffer = IO::Buffer.new(8)  # create empty 8-byte buffer
# =>
# #<IO::Buffer 0x0000555f5d1a5c50+8 INTERNAL>
# ...
buffer
# =>
# <IO::Buffer 0x0000555f5d156ab0+8 INTERNAL>
# 0x00000000  00 00 00 00 00 00 00 00
buffer.set_string('test', 2) # put there bytes of the "test" string, starting from offset 2
# => 4
buffer.get_string  # get the result
# => "\x00\x00test\x00\x00"

Buffer from string:

string = 'buffer'
buffer = IO::Buffer.for(string)
# =>
# #<IO::Buffer 0x00007f3f02be9b18+4 SLICE>
# ...
buffer
# =>
# #<IO::Buffer 0x00007f3f02be9b18+4 SLICE>
# 0x00000000  64 61 74 61                                     buffer

buffer.get_string(2)  # read content starting from offset 2
# => "ta"
buffer.set_string('---', 1) # write content, starting from offset 1
# => 3
buffer
# =>
# #<IO::Buffer 0x00007f3f02be9b18+4 SLICE>
# 0x00000000  64 2d 2d 2d                                     d---
string  # original string changed, too
# => "d---"

Buffer from file:

File.write('test.txt', 'test buffer')
# => 9
buffer = IO::Buffer.map(File.open('test.txt'))
# =>
# #<IO::Buffer 0x00007f3f0768c000+9 MAPPED IMMUTABLE>
# ...
buffer.get_string(5, 2) # read 2 bytes, starting from offset 5
# => "da"
buffer.set_string('---', 1) # attempt to write
# in `set_string': Buffer is not writable! (IO::Buffer::AccessError)

# To create writable file-mapped buffer
# Open file for read-write, pass size, offset, and flags=0
buffer = IO::Buffer.map(File.open('test.txt', 'r+'), 9, 0, 0)
buffer.set_string('---', 1)
# => 3 -- bytes written
File.read('test.txt')
# => "t--- buffer"

The class is experimental and the interface is subject to change, this is especially true of file mappings which may be removed entirely in the future.

Constants

The operating system page size. Used for efficient page-aligned memory allocations.

The default buffer size, typically a (small) multiple of the PAGE_SIZE. Can be explicitly specified by setting the RUBY_IO_BUFFER_DEFAULT_SIZE environment variable.

Indicates that the memory in the buffer is owned by someone else. See external? for more details.

Indicates that the memory in the buffer is owned by the buffer. See internal? for more details.

Indicates that the memory in the buffer is mapped by the operating system. See mapped? for more details.

Indicates that the memory in the buffer is also mapped such that it can be shared with other processes. See shared? for more details.

Indicates that the memory in the buffer is locked and cannot be resized or freed. See locked? and locked for more details.

Indicates that the memory in the buffer is mapped privately and changes won’t be replicated to the underlying file. See private? for more details.

Indicates that the memory in the buffer is read only, and attempts to modify it will fail. See readonly? for more details.

Refers to little endian byte order, where the least significant byte is stored first. See get_value for more details.

Refers to big endian byte order, where the most significant byte is stored first. See get_value for more details.

Refers to the byte order of the host machine. See get_value for more details.

Refers to network byte order, which is the same as big endian. See get_value for more details.

Class Methods

Creates a zero-copy IO::Buffer from the given string’s memory. Without a block a frozen internal copy of the string is created efficiently and used as the buffer source. When a block is provided, the buffer is associated directly with the string’s internal buffer and updating the buffer will update the string.

Until free is invoked on the buffer, either explicitly or via the garbage collector, the source string will be locked and cannot be modified.

If the string is frozen, it will create a read-only buffer which cannot be modified. If the string is shared, it may trigger a copy-on-write when using the block form.

string = 'test'
buffer = IO::Buffer.for(string)
buffer.external? #=> true

buffer.get_string(0, 1)
# => "t"
string
# => "best"

buffer.resize(100)
# in `resize': Cannot resize external buffer! (IO::Buffer::AccessError)

IO::Buffer.for(string) do |buffer|
  buffer.set_string("T")
  string
  # => "Test"
end

Create an IO::Buffer for reading from file by memory-mapping the file. file_io should be a File instance, opened for reading.

Optional size and offset of mapping can be specified.

By default, the buffer would be immutable (read only); to create a writable mapping, you need to open a file in read-write mode, and explicitly pass flags argument without IO::Buffer::IMMUTABLE.

File.write('test.txt', 'test')

buffer = IO::Buffer.map(File.open('test.txt'), nil, 0, IO::Buffer::READONLY)
# => #<IO::Buffer 0x00000001014a0000+4 MAPPED READONLY>

buffer.readonly?   # => true

buffer.get_string
# => "test"

buffer.set_string('b', 0)
# `set_string': Buffer is not writable! (IO::Buffer::AccessError)

# create read/write mapping: length 4 bytes, offset 0, flags 0
buffer = IO::Buffer.map(File.open('test.txt', 'r+'), 4, 0)
buffer.set_string('b', 0)
# => 1

# Check it
File.read('test.txt')
# => "best"

Note that some operating systems may not have cache coherency between mapped buffers and file reads.

Create a new zero-filled IO::Buffer of size bytes. By default, the buffer will be internal: directly allocated chunk of the memory. But if the requested size is more than OS-specific IO::Buffer::PAGE_SIZE, the buffer would be allocated using the virtual memory mechanism (anonymous mmap on Unix, VirtualAlloc on Windows). The behavior can be forced by passing IO::Buffer::MAPPED as a second parameter.

buffer = IO::Buffer.new(4)
# =>
# #<IO::Buffer 0x000055b34497ea10+4 INTERNAL>
# 0x00000000  00 00 00 00                                     ....

buffer.get_string(0, 1) # => "\x00"

buffer.set_string("test")
buffer
# =>
# #<IO::Buffer 0x000055b34497ea10+4 INTERNAL>
# 0x00000000  74 65 73 74                                     test

Returns the size of the given buffer type(s) in bytes.

IO::Buffer.size_of(:u32) # => 4
IO::Buffer.size_of([:u32, :u32]) # => 8

Creates a new string of the given length and yields a zero-copy IO::Buffer instance to the block which uses the string as a source. The block is expected to write to the buffer and the string will be returned.

IO::Buffer.string(4) do |buffer|
  buffer.set_string("Ruby")
end
# => "Ruby"
Instance Methods

Generate a new buffer the same size as the source by applying the binary AND operation to the source, using the mask, repeating as necessary.

IO::Buffer.for("1234567890") & IO::Buffer.for("\xFF\x00\x00\xFF")
# =>
# #<IO::Buffer 0x00005589b2758480+4 INTERNAL>
# 0x00000000  31 00 00 34 35 00 00 38 39 00                   1..45..89.

Buffers are compared by size and exact contents of the memory they are referencing using memcmp.

Generate a new buffer the same size as the source by applying the binary XOR operation to the source, using the mask, repeating as necessary.

IO::Buffer.for("1234567890") ^ IO::Buffer.for("\xFF\x00\x00\xFF")
# =>
# #<IO::Buffer 0x000055a2d5d10480+10 INTERNAL>
# 0x00000000  ce 32 33 cb ca 36 37 c7 c6 30                   .23..67..0

Modify the source buffer in place by applying the binary AND operation to the source, using the mask, repeating as necessary.

source = IO::Buffer.for("1234567890").dup # Make a read/write copy.
# =>
# #<IO::Buffer 0x000056307a0d0c20+10 INTERNAL>
# 0x00000000  31 32 33 34 35 36 37 38 39 30                   1234567890

source.and!(IO::Buffer.for("\xFF\x00\x00\xFF"))
# =>
# #<IO::Buffer 0x000056307a0d0c20+10 INTERNAL>
# 0x00000000  31 00 00 34 35 00 00 38 39 00                   1..45..89.

Fill buffer with value, starting with offset and going for length bytes.

buffer = IO::Buffer.for('test')
# =>
#   <IO::Buffer 0x00007fca40087c38+4 SLICE>
#   0x00000000  74 65 73 74         test

buffer.clear
# =>
#   <IO::Buffer 0x00007fca40087c38+4 SLICE>
#   0x00000000  00 00 00 00         ....

buf.clear(1) # fill with 1
# =>
#   <IO::Buffer 0x00007fca40087c38+4 SLICE>
#   0x00000000  01 01 01 01         ....

buffer.clear(2, 1, 2) # fill with 2, starting from offset 1, for 2 bytes
# =>
#   <IO::Buffer 0x00007fca40087c38+4 SLICE>
#   0x00000000  01 02 02 01         ....

buffer.clear(2, 1) # fill with 2, starting from offset 1
# =>
#   <IO::Buffer 0x00007fca40087c38+4 SLICE>
#   0x00000000  01 02 02 02         ....

Efficiently copy from a source IO::Buffer into the buffer, at offset using memcpy. For copying String instances, see set_string.

buffer = IO::Buffer.new(32)
# =>
# #<IO::Buffer 0x0000555f5ca22520+32 INTERNAL>
# 0x00000000  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
# 0x00000010  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................  *

buffer.copy(IO::Buffer.for("test"), 8)
# => 4 -- size of buffer copied
buffer
# =>
# #<IO::Buffer 0x0000555f5cf8fe40+32 INTERNAL>
# 0x00000000  00 00 00 00 00 00 00 00 74 65 73 74 00 00 00 00 ........test....
# 0x00000010  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ *

copy can be used to put buffer into strings associated with buffer:

string= "buffer:    "
# => "buffer:    "
buffer = IO::Buffer.for(string)
buffer.copy(IO::Buffer.for("test"), 5)
# => 4
string
# => "buffer:test"

Attempt to copy into a read-only buffer will fail:

File.write('test.txt', 'test')
buffer = IO::Buffer.map(File.open('test.txt'), nil, 0, IO::Buffer::READONLY)
buffer.copy(IO::Buffer.for("test"), 8)
# in `copy': Buffer is not writable! (IO::Buffer::AccessError)

See ::map for details of creation of mutable file mappings, this will work:

buffer = IO::Buffer.map(File.open('test.txt', 'r+'))
buffer.copy(IO::Buffer.for("boom"), 0)
# => 4
File.read('test.txt')
# => "boom"

Attempt to copy the buffer which will need place outside of buffer’s bounds will fail:

buffer = IO::Buffer.new(2)
buffer.copy(IO::Buffer.for('test'), 0)
# in `copy': Specified offset+length is bigger than the buffer size! (ArgumentError)

Iterates over the buffer, yielding each value of buffer_type starting from offset.

If count is given, only count values will be yielded.

IO::Buffer.for("Hello World").each(:U8, 2, 2) do |offset, value|
  puts "#{offset}: #{value}"
end
# 2: 108
# 3: 108

Iterates over the buffer, yielding each byte starting from offset.

If count is given, only count bytes will be yielded.

IO::Buffer.for("Hello World").each_byte(2, 2) do |offset, byte|
  puts "#{offset}: #{byte}"
end
# 2: 108
# 3: 108

If the buffer has 0 size: it is created by ::new with size 0, or with ::for from an empty string. (Note that empty files can’t be mapped, so the buffer created with ::map will never be empty.)

The buffer is external if it references the memory which is not allocated or mapped by the buffer itself.

A buffer created using ::for has an external reference to the string’s memory.

External buffer can’t be resized.

If the buffer references memory, release it back to the operating system.

  • for a mapped buffer (e.g. from file): unmap.

  • for a buffer created from scratch: free memory.

  • for a buffer created from string: undo the association.

After the buffer is freed, no further operations can’t be performed on it.

You can resize a freed buffer to re-allocate it.

buffer = IO::Buffer.for('test')
buffer.free
# => #<IO::Buffer 0x0000000000000000+0 NULL>

buffer.get_value(:U8, 0)
# in `get_value': The buffer is not allocated! (IO::Buffer::AllocationError)

buffer.get_string
# in `get_string': The buffer is not allocated! (IO::Buffer::AllocationError)

buffer.null?
# => true

Read a chunk or all of the buffer into a string, in the specified encoding. If no encoding is provided Encoding::BINARY is used.

buffer = IO::Buffer.for('test')
buffer.get_string
# => "test"
buffer.get_string(2)
# => "st"
buffer.get_string(2, 1)
# => "s"

Read from buffer a value of type at offset. buffer_type should be one of symbols:

  • :U8: unsigned integer, 1 byte

  • :S8: signed integer, 1 byte

  • :u16: unsigned integer, 2 bytes, little-endian

  • :U16: unsigned integer, 2 bytes, big-endian

  • :s16: signed integer, 2 bytes, little-endian

  • :S16: signed integer, 2 bytes, big-endian

  • :u32: unsigned integer, 4 bytes, little-endian

  • :U32: unsigned integer, 4 bytes, big-endian

  • :s32: signed integer, 4 bytes, little-endian

  • :S32: signed integer, 4 bytes, big-endian

  • :u64: unsigned integer, 8 bytes, little-endian

  • :U64: unsigned integer, 8 bytes, big-endian

  • :s64: signed integer, 8 bytes, little-endian

  • :S64: signed integer, 8 bytes, big-endian

  • :f32: float, 4 bytes, little-endian

  • :F32: float, 4 bytes, big-endian

  • :f64: double, 8 bytes, little-endian

  • :F64: double, 8 bytes, big-endian

A buffer type refers specifically to the type of binary buffer that is stored in the buffer. For example, a :u32 buffer type is a 32-bit unsigned integer in little-endian format.

string = [1.5].pack('f')
# => "\x00\x00\xC0?"
IO::Buffer.for(string).get_value(:f32, 0)
# => 1.5

Similar to get_value, except that it can handle multiple buffer types and returns an array of values.

string = [1.5, 2.5].pack('ff')
IO::Buffer.for(string).get_values([:f32, :f32], 0)
# => [1.5, 2.5]

Returns a human-readable string representation of the buffer. The exact format is subject to change.

buffer = IO::Buffer.for("Hello World")
puts buffer.hexdump
# 0x00000000  48 65 6c 6c 6f 20 57 6f 72 6c 64                Hello World

As buffers are usually fairly big, you may want to limit the output by specifying the offset and length:

puts buffer.hexdump(6, 5)
# 0x00000006  57 6f 72 6c 64                                  World

Make an internal copy of the source buffer. Updates to the copy will not affect the source buffer.

source = IO::Buffer.for("Hello World")
# =>
# #<IO::Buffer 0x00007fd598466830+11 EXTERNAL READONLY SLICE>
# 0x00000000  48 65 6c 6c 6f 20 57 6f 72 6c 64                Hello World
buffer = source.dup
# =>
# #<IO::Buffer 0x0000558cbec03320+11 INTERNAL>
# 0x00000000  48 65 6c 6c 6f 20 57 6f 72 6c 64                Hello World

Inspect the buffer and report useful information about it’s internal state. Only a limited portion of the buffer will be displayed in a hexdump style format.

buffer = IO::Buffer.for("Hello World")
puts buffer.inspect
# #<IO::Buffer 0x000000010198ccd8+11 EXTERNAL READONLY SLICE>
# 0x00000000  48 65 6c 6c 6f 20 57 6f 72 6c 64                Hello World

If the buffer is internal, meaning it references memory allocated by the buffer itself.

An internal buffer is not associated with any external memory (e.g. string) or file mapping.

Internal buffers are created using ::new and is the default when the requested size is less than the IO::Buffer::PAGE_SIZE and it was not requested to be mapped on creation.

Internal buffers can be resized, and such an operation will typically invalidate all slices, but not always.

Allows to process a buffer in exclusive way, for concurrency-safety. While the block is performed, the buffer is considered locked, and no other code can enter the lock. Also, locked buffer can’t be changed with resize or free.

The following operations acquire a lock: resize, free.

Locking is not thread safe. It is designed as a safety net around non-blocking system calls. You can only share a buffer between threads with appropriate synchronisation techniques.

buffer = IO::Buffer.new(4)
buffer.locked? #=> false

Fiber.schedule do
  buffer.locked do
    buffer.write(io) # theoretical system call interface
  end
end

Fiber.schedule do
  # in `locked': Buffer already locked! (IO::Buffer::LockedError)
  buffer.locked do
    buffer.set_string("test", 0)
  end
end

If the buffer is locked, meaning it is inside locked block execution. Locked buffer can’t be resized or freed, and another lock can’t be acquired on it.

Locking is not thread safe, but is a semantic used to ensure buffers don’t move while being used by a system call.

buffer.locked do
  buffer.write(io) # theoretical system call interface
end

If the buffer is mapped, meaning it references memory mapped by the buffer.

Mapped buffers are either anonymous, if created by ::new with the IO::Buffer::MAPPED flag or if the size was at least IO::Buffer::PAGE_SIZE, or backed by a file if created with ::map.

Mapped buffers can usually be resized, and such an operation will typically invalidate all slices, but not always.

Modify the source buffer in place by applying the binary NOT operation to the source.

source = IO::Buffer.for("1234567890").dup # Make a read/write copy.
# =>
# #<IO::Buffer 0x000056307a33a450+10 INTERNAL>
# 0x00000000  31 32 33 34 35 36 37 38 39 30                   1234567890

source.not!
# =>
# #<IO::Buffer 0x000056307a33a450+10 INTERNAL>
# 0x00000000  ce cd cc cb ca c9 c8 c7 c6 cf                   ..........

If the buffer was freed with free, transferred with transfer, or was never allocated in the first place.

buffer = IO::Buffer.new(0)
buffer.null? #=> true

buffer = IO::Buffer.new(4)
buffer.null? #=> false
buffer.free
buffer.null? #=> true

Modify the source buffer in place by applying the binary OR operation to the source, using the mask, repeating as necessary.

source = IO::Buffer.for("1234567890").dup # Make a read/write copy.
# =>
# #<IO::Buffer 0x000056307a272350+10 INTERNAL>
# 0x00000000  31 32 33 34 35 36 37 38 39 30                   1234567890

source.or!(IO::Buffer.for("\xFF\x00\x00\xFF"))
# =>
# #<IO::Buffer 0x000056307a272350+10 INTERNAL>
# 0x00000000  ff 32 33 ff ff 36 37 ff ff 30                   .23..67..0

Read at least length bytes from the io starting at the specified from position, into the buffer starting at offset. If an error occurs, return -errno.

If length is not given or nil, it defaults to the size of the buffer minus the offset, i.e. the entire buffer.

If length is zero, exactly one pread operation will occur.

If offset is not given, it defaults to zero, i.e. the beginning of the buffer.

IO::Buffer.for('test') do |buffer|
  p buffer
  # =>
  # <IO::Buffer 0x00007fca40087c38+4 SLICE>
  # 0x00000000  74 65 73 74         test

  # take 2 bytes from the beginning of urandom,
  # put them in buffer starting from position 2
  buffer.pread(File.open('/dev/urandom', 'rb'), 0, 2, 2)
  p buffer
  # =>
  # <IO::Buffer 0x00007f3bc65f2a58+4 EXTERNAL SLICE>
  # 0x00000000  05 35 73 74         te.5
end

If the buffer is private, meaning modifications to the buffer will not be replicated to the underlying file mapping.

# Create a test file:
File.write('test.txt', 'test')

# Create a private mapping from the given file. Note that the file here
# is opened in read-only mode, but it doesn't matter due to the private
# mapping:
buffer = IO::Buffer.map(File.open('test.txt'), nil, 0, IO::Buffer::PRIVATE)
# => #<IO::Buffer 0x00007fce63f11000+4 MAPPED PRIVATE>

# Write to the buffer (invoking CoW of the underlying file buffer):
buffer.set_string('b', 0)
# => 1

# The file itself is not modified:
File.read('test.txt')
# => "test"

Write at least length bytes from the buffer starting at offset, into the io starting at the specified from position. If an error occurs, return -errno.

If length is not given or nil, it defaults to the size of the buffer minus the offset, i.e. the entire buffer.

If length is zero, exactly one pwrite operation will occur.

If offset is not given, it defaults to zero, i.e. the beginning of the buffer.

If the from position is beyond the end of the file, the gap will be filled with null (0 value) bytes.

out = File.open('output.txt', File::RDWR) # open for read/write, no truncation
IO::Buffer.for('1234567').pwrite(out, 2, 3, 1)

This leads to 234 (3 bytes, starting from position 1) being written into output.txt, starting from file position 2.

Read at least length bytes from the io, into the buffer starting at offset. If an error occurs, return -errno.

If length is not given or nil, it defaults to the size of the buffer minus the offset, i.e. the entire buffer.

If length is zero, exactly one read operation will occur.

If offset is not given, it defaults to zero, i.e. the beginning of the buffer.

IO::Buffer.for('test') do |buffer|
  p buffer
  # =>
  # <IO::Buffer 0x00007fca40087c38+4 SLICE>
  # 0x00000000  74 65 73 74         test
  buffer.read(File.open('/dev/urandom', 'rb'), 2)
  p buffer
  # =>
  # <IO::Buffer 0x00007f3bc65f2a58+4 EXTERNAL SLICE>
  # 0x00000000  05 35 73 74         .5st
end

If the buffer is read only, meaning the buffer cannot be modified using set_value, set_string or copy and similar.

Frozen strings and read-only files create read-only buffers.

Resizes a buffer to a new_size bytes, preserving its content. Depending on the old and new size, the memory area associated with the buffer might be either extended, or rellocated at different address with content being copied.

buffer = IO::Buffer.new(4)
buffer.set_string("test", 0)
buffer.resize(8) # resize to 8 bytes
# =>
# #<IO::Buffer 0x0000555f5d1a1630+8 INTERNAL>
# 0x00000000  74 65 73 74 00 00 00 00                         test....

External buffer (created with ::for), and locked buffer can not be resized.

Efficiently copy from a source String into the buffer, at offset using memcpy.

buf = IO::Buffer.new(8)
# =>
# #<IO::Buffer 0x0000557412714a20+8 INTERNAL>
# 0x00000000  00 00 00 00 00 00 00 00                         ........

# set buffer starting from offset 1, take 2 bytes starting from string's
# second
buf.set_string('test', 1, 2, 1)
# => 2
buf
# =>
# #<IO::Buffer 0x0000557412714a20+8 INTERNAL>
# 0x00000000  00 65 73 00 00 00 00 00                         .es.....

See also copy for examples of how buffer writing might be used for changing associated strings and files.

Write to a buffer a value of type at offset. type should be one of symbols described in get_value.

buffer = IO::Buffer.new(8)
# =>
# #<IO::Buffer 0x0000555f5c9a2d50+8 INTERNAL>
# 0x00000000  00 00 00 00 00 00 00 00

buffer.set_value(:U8, 1, 111)
# => 1

buffer
# =>
# #<IO::Buffer 0x0000555f5c9a2d50+8 INTERNAL>
# 0x00000000  00 6f 00 00 00 00 00 00                         .o......

Note that if the type is integer and value is Float, the implicit truncation is performed:

buffer = IO::Buffer.new(8)
buffer.set_value(:U32, 0, 2.5)

buffer
# =>
# #<IO::Buffer 0x0000555f5c9a2d50+8 INTERNAL>
# 0x00000000  00 00 00 02 00 00 00 00
#                      ^^ the same as if we'd pass just integer 2

Write values of buffer_types at offset to the buffer. buffer_types should be an array of symbols as described in get_value. values should be an array of values to write.

buffer = IO::Buffer.new(8)
buffer.set_values([:U8, :U16], 0, [1, 2])
buffer
# =>
# #<IO::Buffer 0x696f717561746978+8 INTERNAL>
# 0x00000000  01 00 02 00 00 00 00 00                         ........

If the buffer is shared, meaning it references memory that can be shared with other processes (and thus might change without being modified locally).

# Create a test file:
File.write('test.txt', 'test')

# Create a shared mapping from the given file, the file must be opened in
# read-write mode unless we also specify IO::Buffer::READONLY:
buffer = IO::Buffer.map(File.open('test.txt', 'r+'), nil, 0)
# => #<IO::Buffer 0x00007f1bffd5e000+4 EXTERNAL MAPPED SHARED>

# Write to the buffer, which will modify the mapped file:
buffer.set_string('b', 0)
# => 1

# The file itself is modified:
File.read('test.txt')
# => "best"

Returns the size of the buffer that was explicitly set (on creation with ::new or on resize), or deduced on buffer’s creation from string or file.

Produce another IO::Buffer which is a slice (or view into) the current one starting at offset bytes and going for length bytes.

The slicing happens without copying of memory, and the slice keeps being associated with the original buffer’s source (string, or file), if any.

If the offset is not given, it will be zero. If the offset is negative, it will raise an ArgumentError.

If the length is not given, the slice will be as long as the original buffer minus the specified offset. If the length is negative, it will raise an ArgumentError.

Raises RuntimeError if the offset+length is out of the current buffer’s bounds.

string = 'test'
buffer = IO::Buffer.for(string)

slice = buffer.slice
# =>
# #<IO::Buffer 0x0000000108338e68+4 SLICE>
# 0x00000000  74 65 73 74                                     test

buffer.slice(2)
# =>
# #<IO::Buffer 0x0000000108338e6a+2 SLICE>
# 0x00000000  73 74                                           st

slice = buffer.slice(1, 2)
# =>
# #<IO::Buffer 0x00007fc3d34ebc49+2 SLICE>
# 0x00000000  65 73                                           es

# Put "o" into 0s position of the slice
slice.set_string('o', 0)
slice
# =>
# #<IO::Buffer 0x00007fc3d34ebc49+2 SLICE>
# 0x00000000  6f 73                                           os

# it is also visible at position 1 of the original buffer
buffer
# =>
# #<IO::Buffer 0x00007fc3d31e2d80+4 SLICE>
# 0x00000000  74 6f 73 74                                     tost

# ...and original string
string
# => tost

Short representation of the buffer. It includes the address, size and symbolic flags. This format is subject to change.

puts IO::Buffer.new(4) # uses to_s internally
# #<IO::Buffer 0x000055769f41b1a0+4 INTERNAL>

Transfers ownership of the underlying memory to a new buffer, causing the current buffer to become uninitialized.

buffer = IO::Buffer.new('test')
other = buffer.transfer
other
# =>
# #<IO::Buffer 0x00007f136a15f7b0+4 SLICE>
# 0x00000000  74 65 73 74                                     test
buffer
# =>
# #<IO::Buffer 0x0000000000000000+0 NULL>
buffer.null?
# => true

Returns whether the buffer buffer is accessible.

A buffer becomes invalid if it is a slice of another buffer (or string) which has been freed or re-allocated at a different address.

Returns an array of values of buffer_type starting from offset.

If count is given, only count values will be returned.

IO::Buffer.for("Hello World").values(:U8, 2, 2)
# => [108, 108]

Write at least length bytes from the buffer starting at offset, into the io. If an error occurs, return -errno.

If length is not given or nil, it defaults to the size of the buffer minus the offset, i.e. the entire buffer.

If length is zero, exactly one write operation will occur.

If offset is not given, it defaults to zero, i.e. the beginning of the buffer.

out = File.open('output.txt', 'wb')
IO::Buffer.for('1234567').write(out, 3)

This leads to 123 being written into output.txt

Modify the source buffer in place by applying the binary XOR operation to the source, using the mask, repeating as necessary.

source = IO::Buffer.for("1234567890").dup # Make a read/write copy.
# =>
# #<IO::Buffer 0x000056307a25b3e0+10 INTERNAL>
# 0x00000000  31 32 33 34 35 36 37 38 39 30                   1234567890

source.xor!(IO::Buffer.for("\xFF\x00\x00\xFF"))
# =>
# #<IO::Buffer 0x000056307a25b3e0+10 INTERNAL>
# 0x00000000  ce 32 33 cb ca 36 37 c7 c6 30                   .23..67..0

Generate a new buffer the same size as the source by applying the binary OR operation to the source, using the mask, repeating as necessary.

IO::Buffer.for("1234567890") | IO::Buffer.for("\xFF\x00\x00\xFF")
# =>
# #<IO::Buffer 0x0000561785ae3480+10 INTERNAL>
# 0x00000000  ff 32 33 ff ff 36 37 ff ff 30                   .23..67..0

Generate a new buffer the same size as the source by applying the binary NOT operation to the source.

~IO::Buffer.for("1234567890")
# =>
# #<IO::Buffer 0x000055a5ac42f120+10 INTERNAL>
# 0x00000000  ce cd cc cb ca c9 c8 c7 c6 cf                   ..........