Foo::Bar = 1 ^^^^^^^^^^^^
Foo::Foo, Bar::Bar = 1 ^^^^^^^^ ^^^^^^^^
Foo::Bar, = baz ^^^^^^^^
def foo(**bar); end
^^^^^
def foo(**); end
^^
Foo::Bar = 1 ^^^^^^^^^^^^
Foo::Foo, Bar::Bar = 1 ^^^^^^^^ ^^^^^^^^
Foo::Bar, = baz ^^^^^^^^
def foo(**bar); end
^^^^^
def foo(**); end
^^
def foo(bar:); end
^^^^
Returns a new Array whose elements are the elements of self at the given Integer or Range indexes.
For each positive index, returns the element at offset index:
a = [:foo, 'bar', 2] a.values_at(0, 2) # => [:foo, 2] a.values_at(0..1) # => [:foo, "bar"]
The given indexes may be in any order, and may repeat:
a = [:foo, 'bar', 2] a.values_at(2, 0, 1, 0, 2) # => [2, :foo, "bar", :foo, 2] a.values_at(1, 0..2) # => ["bar", :foo, "bar", 2]
Assigns nil for an index that is too large:
a = [:foo, 'bar', 2] a.values_at(0, 3, 1, 3) # => [:foo, nil, "bar", nil]
Returns a new empty Array if no arguments given.
For each negative index, counts backward from the end of the array:
a = [:foo, 'bar', 2] a.values_at(-1, -3) # => [2, :foo]
Assigns nil for an index that is too small:
a = [:foo, 'bar', 2] a.values_at(0, -5, 1, -6, 2) # => [:foo, nil, "bar", nil, 2]
The given indexes may have a mixture of signs:
a = [:foo, 'bar', 2] a.values_at(0, -2, 1, -1) # => [:foo, "bar", "bar", 2]
Deletes an element from self, per the given Integer index.
When index is non-negative, deletes the element at offset index:
a = [:foo, 'bar', 2] a.delete_at(1) # => "bar" a # => [:foo, 2]
If index is too large, returns nil.
When index is negative, counts backward from the end of the array:
a = [:foo, 'bar', 2] a.delete_at(-2) # => "bar" a # => [:foo, 2]
If index is too small (far from zero), returns nil.
Returns the number of bits of the value of self, which is the bit position of the highest-order bit that is different from the sign bit (where the least significant bit has bit position 1). If there is no such bit (zero or minus one), returns zero.
This method returns ceil(log2(self < 0 ? -self : self + 1))>.
(-2**1000-1).bit_length # => 1001 (-2**1000).bit_length # => 1000 (-2**1000+1).bit_length # => 1000 (-2**12-1).bit_length # => 13 (-2**12).bit_length # => 12 (-2**12+1).bit_length # => 12 -0x101.bit_length # => 9 -0x100.bit_length # => 8 -0xff.bit_length # => 8 -2.bit_length # => 1 -1.bit_length # => 0 0.bit_length # => 0 1.bit_length # => 1 0xff.bit_length # => 8 0x100.bit_length # => 9 (2**12-1).bit_length # => 12 (2**12).bit_length # => 13 (2**12+1).bit_length # => 13 (2**1000-1).bit_length # => 1000 (2**1000).bit_length # => 1001 (2**1000+1).bit_length # => 1001
For Integer n, this method can be used to detect overflow in Array#pack:
if n.bit_length < 32 [n].pack('l') # No overflow. else raise 'Overflow' end
Returns an array of the grapheme clusters in self (see Unicode Grapheme Cluster Boundaries):
s = "\u0061\u0308-pqr-\u0062\u0308-xyz-\u0063\u0308" # => "ä-pqr-b̈-xyz-c̈" s.grapheme_clusters # => ["ä", "-", "p", "q", "r", "-", "b̈", "-", "x", "y", "z", "-", "c̈"]
Returns whether self starts with any of the given string_or_regexp.
Matches patterns against the beginning of self. For each given string_or_regexp, the pattern is:
string_or_regexp itself, if it is a Regexp.
Regexp.quote(string_or_regexp), if string_or_regexp is a string.
Returns true if any pattern matches the beginning, false otherwise:
'hello'.start_with?('hell') # => true 'hello'.start_with?(/H/i) # => true 'hello'.start_with?('heaven', 'hell') # => true 'hello'.start_with?('heaven', 'paradise') # => false 'тест'.start_with?('т') # => true 'こんにちは'.start_with?('こ') # => true
Related: String#end_with?.
Returns whether self ends with any of the given strings.
Returns true if any given string matches the end, false otherwise:
'hello'.end_with?('ello') #=> true 'hello'.end_with?('heaven', 'ello') #=> true 'hello'.end_with?('heaven', 'paradise') #=> false 'тест'.end_with?('т') # => true 'こんにちは'.end_with?('は') # => true
Related: String#start_with?.
Returns the next-larger representable Float.
These examples show the internally stored values (64-bit hexadecimal) for each Float f and for the corresponding f.next_float:
f = 0.0 # 0x0000000000000000 f.next_float # 0x0000000000000001 f = 0.01 # 0x3f847ae147ae147b f.next_float # 0x3f847ae147ae147c
In the remaining examples here, the output is shown in the usual way (result to_s):
0.01.next_float # => 0.010000000000000002 1.0.next_float # => 1.0000000000000002 100.0.next_float # => 100.00000000000001 f = 0.01 (0..3).each_with_index {|i| printf "%2d %-20a %s\n", i, f, f.to_s; f = f.next_float }
Output:
0 0x1.47ae147ae147bp-7 0.01
1 0x1.47ae147ae147cp-7 0.010000000000000002
2 0x1.47ae147ae147dp-7 0.010000000000000004
3 0x1.47ae147ae147ep-7 0.010000000000000005
f = 0.0; 100.times { f += 0.1 }
f # => 9.99999999999998 # should be 10.0 in the ideal world.
10-f # => 1.9539925233402755e-14 # the floating point error.
10.0.next_float-10 # => 1.7763568394002505e-15 # 1 ulp (unit in the last place).
(10-f)/(10.0.next_float-10) # => 11.0 # the error is 11 ulp.
(10-f)/(10*Float::EPSILON) # => 8.8 # approximation of the above.
"%a" % 10 # => "0x1.4p+3"
"%a" % f # => "0x1.3fffffffffff5p+3" # the last hex digit is 5. 16 - 5 = 11 ulp.
Related: Float#prev_float
Returns the next-smaller representable Float.
These examples show the internally stored values (64-bit hexadecimal) for each Float f and for the corresponding f.pev_float:
f = 5e-324 # 0x0000000000000001 f.prev_float # 0x0000000000000000 f = 0.01 # 0x3f847ae147ae147b f.prev_float # 0x3f847ae147ae147a
In the remaining examples here, the output is shown in the usual way (result to_s):
0.01.prev_float # => 0.009999999999999998 1.0.prev_float # => 0.9999999999999999 100.0.prev_float # => 99.99999999999999 f = 0.01 (0..3).each_with_index {|i| printf "%2d %-20a %s\n", i, f, f.to_s; f = f.prev_float }
Output:
0 0x1.47ae147ae147bp-7 0.01 1 0x1.47ae147ae147ap-7 0.009999999999999998 2 0x1.47ae147ae1479p-7 0.009999999999999997 3 0x1.47ae147ae1478p-7 0.009999999999999995
Related: Float#next_float.
Like backtrace, but returns each line of the execution stack as a Thread::Backtrace::Location. Accepts the same arguments as backtrace.
f = Fiber.new { Fiber.yield } f.resume loc = f.backtrace_locations.first loc.label #=> "yield" loc.path #=> "test.rb" loc.lineno #=> 1
Returns default external encoding.
The default external encoding is used by default for strings created from the following locations:
CSV
File data read from disk
SDBM
While strings created from these locations will have this encoding, the encoding may not be valid. Be sure to check String#valid_encoding?.
File data written to disk will be transcoded to the default external encoding when written, if default_internal is not nil.
The default external encoding is initialized by the -E option. If -E isn’t set, it is initialized to UTF-8 on Windows and the locale on other operating systems.
Sets default external encoding. You should not set Encoding::default_external in ruby code as strings created before changing the value may have a different encoding from strings created after the value was changed., instead you should use ruby -E to invoke ruby with the correct default_external.
See Encoding::default_external for information on how the default external encoding is used.
Returns default internal encoding. Strings will be transcoded to the default internal encoding in the following places if the default internal encoding is not nil:
CSV
File data read from disk
Strings returned from Readline
Strings returned from SDBM
Values from ENV
Values in ARGV including $PROGRAM_NAME
Additionally String#encode and String#encode! use the default internal encoding if no encoding is given.
The script encoding (__ENCODING__), not default_internal, is used as the encoding of created strings.
Encoding::default_internal is initialized with -E option or nil otherwise.
Sets default internal encoding or removes default internal encoding when passed nil. You should not set Encoding::default_internal in ruby code as strings created before changing the value may have a different encoding from strings created after the change. Instead you should use ruby -E to invoke ruby with the correct default_internal.
See Encoding::default_internal for information on how the default internal encoding is used.
Iterates the given block for each element with an index, which starts from offset. If no block is given, returns a new Enumerator that includes the index, starting from offset
offset
the starting index to use