Get the internal timeout duration or nil if it was not set.
Sets the internal timeout to the specified duration or nil. The timeout applies to all blocking operations where possible.
When the operation performs longer than the timeout set, IO::TimeoutError is raised.
This affects the following methods (but is not limited to): gets, puts, read, write, wait_readable and wait_writable. This also affects blocking socket operations like Socket#accept and Socket#connect.
Some operations like File#open and IO#close are not affected by the timeout. A timeout during a write operation may leave the IO in an inconsistent state, e.g. data was partially written. Generally speaking, a timeout is a last ditch effort to prevent an application from hanging on slow I/O operations, such as those that occur during a slowloris attack.
Returns true if rat is less than 0.
Returns a new regexp that is the union of the given patterns:
r = Regexp.union(%w[cat dog]) # => /cat|dog/ r.match('cat') # => #<MatchData "cat"> r.match('dog') # => #<MatchData "dog"> r.match('cog') # => nil
For each pattern that is a string, Regexp.new(pattern) is used:
Regexp.union('penzance') # => /penzance/ Regexp.union('a+b*c') # => /a\+b\*c/ Regexp.union('skiing', 'sledding') # => /skiing|sledding/ Regexp.union(['skiing', 'sledding']) # => /skiing|sledding/
For each pattern that is a regexp, it is used as is, including its flags:
Regexp.union(/foo/i, /bar/m, /baz/x) # => /(?i-mx:foo)|(?m-ix:bar)|(?x-mi:baz)/ Regexp.union([/foo/i, /bar/m, /baz/x]) # => /(?i-mx:foo)|(?m-ix:bar)|(?x-mi:baz)/
With no arguments, returns /(?!)/:
Regexp.union # => /(?!)/
If any regexp pattern contains captures, the behavior is unspecified.
It returns the timeout interval for Regexp matching in second. nil means no default timeout configuration.
This configuration is per-object. The global configuration set by Regexp.timeout= is ignored if per-object configuration is set.
re = Regexp.new("^a*b?a*$", timeout: 1) re.timeout #=> 1.0 re =~ "a" * 100000 + "x" #=> regexp match timeout (RuntimeError)
It returns the current default timeout interval for Regexp matching in second. nil means no default timeout configuration.
It sets the default timeout interval for Regexp matching in second. nil means no default timeout configuration. This configuration is process-global. If you want to set timeout for each Regexp, use timeout keyword for Regexp.new.
Regexp.timeout = 1 /^a*b?a*$/ =~ "a" * 100000 + "x" #=> regexp match timeout (RuntimeError)
The opposite of Pathname#absolute?
It returns false if the pathname begins with a slash.
p = Pathname.new('/im/sure') p.relative? #=> false p = Pathname.new('not/so/sure') p.relative? #=> true
Returns the last change time, using directory information, not the file itself.
See File.ctime.
Update the access and modification times of the file.
Same as Pathname#utime, but does not follow symbolic links.
See File.lutime.
Parses the given Ruby program read from src. src must be a String or an IO or a object with a gets method.
Returns an array of interface addresses. An element of the array is an instance of Socket::Ifaddr.
This method can be used to find multicast-enabled interfaces:
pp Socket.getifaddrs.reject {|ifaddr| !ifaddr.addr.ip? || (ifaddr.flags & Socket::IFF_MULTICAST == 0) }.map {|ifaddr| [ifaddr.name, ifaddr.ifindex, ifaddr.addr] } #=> [["eth0", 2, #<Addrinfo: 221.186.184.67>], # ["eth0", 2, #<Addrinfo: fe80::216:3eff:fe95:88bb%eth0>]]
Example result on GNU/Linux:
pp Socket.getifaddrs #=> [#<Socket::Ifaddr lo UP,LOOPBACK,RUNNING,0x10000 PACKET[protocol=0 lo hatype=772 HOST hwaddr=00:00:00:00:00:00]>, # #<Socket::Ifaddr eth0 UP,BROADCAST,RUNNING,MULTICAST,0x10000 PACKET[protocol=0 eth0 hatype=1 HOST hwaddr=00:16:3e:95:88:bb] broadcast=PACKET[protocol=0 eth0 hatype=1 HOST hwaddr=ff:ff:ff:ff:ff:ff]>, # #<Socket::Ifaddr sit0 NOARP PACKET[protocol=0 sit0 hatype=776 HOST hwaddr=00:00:00:00]>, # #<Socket::Ifaddr lo UP,LOOPBACK,RUNNING,0x10000 127.0.0.1 netmask=255.0.0.0>, # #<Socket::Ifaddr eth0 UP,BROADCAST,RUNNING,MULTICAST,0x10000 221.186.184.67 netmask=255.255.255.240 broadcast=221.186.184.79>, # #<Socket::Ifaddr lo UP,LOOPBACK,RUNNING,0x10000 ::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff>, # #<Socket::Ifaddr eth0 UP,BROADCAST,RUNNING,MULTICAST,0x10000 fe80::216:3eff:fe95:88bb%eth0 netmask=ffff:ffff:ffff:ffff::>]
Example result on FreeBSD:
pp Socket.getifaddrs #=> [#<Socket::Ifaddr usbus0 UP,0x10000 LINK[usbus0]>, # #<Socket::Ifaddr re0 UP,BROADCAST,RUNNING,MULTICAST,0x800 LINK[re0 3a:d0:40:9a:fe:e8]>, # #<Socket::Ifaddr re0 UP,BROADCAST,RUNNING,MULTICAST,0x800 10.250.10.18 netmask=255.255.255.? (7 bytes for 16 bytes sockaddr_in) broadcast=10.250.10.255>, # #<Socket::Ifaddr re0 UP,BROADCAST,RUNNING,MULTICAST,0x800 fe80:2::38d0:40ff:fe9a:fee8 netmask=ffff:ffff:ffff:ffff::>, # #<Socket::Ifaddr re0 UP,BROADCAST,RUNNING,MULTICAST,0x800 2001:2e8:408:10::12 netmask=UNSPEC>, # #<Socket::Ifaddr plip0 POINTOPOINT,MULTICAST,0x800 LINK[plip0]>, # #<Socket::Ifaddr lo0 UP,LOOPBACK,RUNNING,MULTICAST LINK[lo0]>, # #<Socket::Ifaddr lo0 UP,LOOPBACK,RUNNING,MULTICAST ::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff>, # #<Socket::Ifaddr lo0 UP,LOOPBACK,RUNNING,MULTICAST fe80:4::1 netmask=ffff:ffff:ffff:ffff::>, # #<Socket::Ifaddr lo0 UP,LOOPBACK,RUNNING,MULTICAST 127.0.0.1 netmask=255.?.?.? (5 bytes for 16 bytes sockaddr_in)>]
Returns revision information for the erb.rb module.
Returns a new ipaddr built by converting the IPv6 address into a native IPv4 address. If the IP address is not an IPv4-mapped or IPv4-compatible IPv6 address, returns self.
Add separator in summary.
Parses command line arguments argv in order when environment variable POSIXLY_CORRECT is set, and in permutation mode otherwise. When optional into keyword argument is provided, the parsed option values are stored there via []= method (so it can be Hash, or OpenStruct, or other similar object).
Same as parse, but removes switches destructively. Non-option arguments remain in argv.
Returns the number of mandatory arguments. If the block is declared to take no arguments, returns 0. If the block is known to take exactly n arguments, returns n. If the block has optional arguments, returns -n-1, where n is the number of mandatory arguments, with the exception for blocks that are not lambdas and have only a finite number of optional arguments; in this latter case, returns n. Keyword arguments will be considered as a single additional argument, that argument being mandatory if any keyword argument is mandatory. A proc with no argument declarations is the same as a block declaring || as its arguments.
proc {}.arity #=> 0 proc { || }.arity #=> 0 proc { |a| }.arity #=> 1 proc { |a, b| }.arity #=> 2 proc { |a, b, c| }.arity #=> 3 proc { |*a| }.arity #=> -1 proc { |a, *b| }.arity #=> -2 proc { |a, *b, c| }.arity #=> -3 proc { |x:, y:, z:0| }.arity #=> 1 proc { |*a, x:, y:0| }.arity #=> -2 proc { |a=0| }.arity #=> 0 lambda { |a=0| }.arity #=> -1 proc { |a=0, b| }.arity #=> 1 lambda { |a=0, b| }.arity #=> -2 proc { |a=0, b=0| }.arity #=> 0 lambda { |a=0, b=0| }.arity #=> -1 proc { |a, b=0| }.arity #=> 1 lambda { |a, b=0| }.arity #=> -2 proc { |(a, b), c=0| }.arity #=> 1 lambda { |(a, b), c=0| }.arity #=> -2 proc { |a, x:0, y:0| }.arity #=> 1 lambda { |a, x:0, y:0| }.arity #=> -2