Results for: "pstore"

Return a single-column matrix from this vector

Returns a Hash using named capture.

A key of the hash is a name of the named captures. A value of the hash is a string of last successful capture of corresponding group.

m = /(?<a>.)(?<b>.)/.match("01")
m.named_captures #=> {"a" => "0", "b" => "1"}

m = /(?<a>.)(?<b>.)?/.match("0")
m.named_captures #=> {"a" => "0", "b" => nil}

m = /(?<a>.)(?<a>.)/.match("01")
m.named_captures #=> {"a" => "1"}

m = /(?<a>x)|(?<a>y)/.match("x")
m.named_captures #=> {"a" => "x"}

Returns the portion of the original string before the current match. Equivalent to the special variable $`.

m = /(.)(.)(\d+)(\d)/.match("THX1138.")
m.pre_match   #=> "T"

Returns the portion of the original string after the current match. Equivalent to the special variable $'.

m = /(.)(.)(\d+)(\d)/.match("THX1138: The Movie")
m.post_match   #=> ": The Movie"

This is similar to PrettyPrint::format but the result has no breaks.

maxwidth, newline and genspace are ignored.

The invocation of breakable in the block doesn’t break a line and is treated as just an invocation of text.

Returns the group most recently added to the stack.

Contrived example:

out = ""
=> ""
q = PrettyPrint.new(out)
=> #<PrettyPrint:0x82f85c0 @output="", @maxwidth=79, @newline="\n", @genspace=#<Proc:0x82f8368@/home/vbatts/.rvm/rubies/ruby-head/lib/ruby/2.0.0/prettyprint.rb:82 (lambda)>, @output_width=0, @buffer_width=0, @buffer=[], @group_stack=[#<PrettyPrint::Group:0x82f8138 @depth=0, @breakables=[], @break=false>], @group_queue=#<PrettyPrint::GroupQueue:0x82fb7c0 @queue=[[#<PrettyPrint::Group:0x82f8138 @depth=0, @breakables=[], @break=false>]]>, @indent=0>
q.group {
  q.text q.current_group.inspect
  q.text q.newline
  q.group(q.current_group.depth + 1) {
    q.text q.current_group.inspect
    q.text q.newline
    q.group(q.current_group.depth + 1) {
      q.text q.current_group.inspect
      q.text q.newline
      q.group(q.current_group.depth + 1) {
        q.text q.current_group.inspect
        q.text q.newline
      }
    }
  }
}
=> 284
 puts out
#<PrettyPrint::Group:0x8354758 @depth=1, @breakables=[], @break=false>
#<PrettyPrint::Group:0x8354550 @depth=2, @breakables=[], @break=false>
#<PrettyPrint::Group:0x83541cc @depth=3, @breakables=[], @break=false>
#<PrettyPrint::Group:0x8347e54 @depth=4, @breakables=[], @break=false>

This is similar to breakable except the decision to break or not is determined individually.

Two fill_breakable under a group may cause 4 results: (break,break), (break,non-break), (non-break,break), (non-break,non-break). This is different to breakable because two breakable under a group may cause 2 results: (break,break), (non-break,non-break).

The text sep is inserted if a line is not broken at this point.

If sep is not specified, “ ” is used.

If width is not specified, sep.length is used. You will have to specify this when sep is a multibyte character, for example.

List of options that will be supplied to RDoc

Iterates over all IP addresses for name.

Iterates over all IP addresses for name.

Returns true if the referenced object is still alive.

Part of the protocol for converting objects to Proc objects. Instances of class Proc simply return themselves.

Marks the proc as passing keywords through a normal argument splat. This should only be called on procs that accept an argument splat (*args) but not explicit keywords or a keyword splat. It marks the proc such that if the proc is called with keyword arguments, the final hash argument is marked with a special flag such that if it is the final element of a normal argument splat to another method call, and that method call does not include explicit keywords or a keyword splat, the final element is interpreted as keywords. In other words, keywords will be passed through the proc to other methods.

This should only be used for procs that delegate keywords to another method, and only for backwards compatibility with Ruby versions before 2.7.

This method will probably be removed at some point, as it exists only for backwards compatibility. As it does not exist in Ruby versions before 2.7, check that the proc responds to this method before calling it. Also, be aware that if this method is removed, the behavior of the proc will change so that it does not pass through keywords.

module Mod
  foo = ->(meth, *args, &block) do
    send(:"do_#{meth}", *args, &block)
  end
  foo.ruby2_keywords if foo.respond_to?(:ruby2_keywords)
end

Returns a Proc object corresponding to this method.

Returns the original name of the method.

class C
  def foo; end
  alias bar foo
end
C.instance_method(:bar).original_name # => :foo

Returns the original name of the method.

class C
  def foo; end
  alias bar foo
end
C.instance_method(:bar).original_name # => :foo

Receive only a specific message.

Instead of Ractor.receive, Ractor.receive_if can provide a pattern by a block and you can choose the receiving message.

r = Ractor.new do
  p Ractor.receive_if{|msg| msg.match?(/foo/)} #=> "foo3"
  p Ractor.receive_if{|msg| msg.match?(/bar/)} #=> "bar1"
  p Ractor.receive_if{|msg| msg.match?(/baz/)} #=> "baz2"
end
r << "bar1"
r << "baz2"
r << "foo3"
r.take

This will output:

foo3
bar1
baz2

If the block returns a truthy value, the message will be removed from the incoming queue and returned. Otherwise, the messsage remains in the incoming queue and the following received messages are checked by the given block.

If there are no messages left in the incoming queue, the method will block until new messages arrive.

If the block is escaped by break/return/exception/throw, the message is removed from the incoming queue as if a truthy value had been returned.

r = Ractor.new do
  val = Ractor.receive_if{|msg| msg.is_a?(Array)}
  puts "Received successfully: #{val}"
end

r.send(1)
r.send('test')
wait
puts "2 non-matching sent, nothing received"
r.send([1, 2, 3])
wait

Prints:

2 non-matching sent, nothing received
Received successfully: [1, 2, 3]

Note that you can not call receive/receive_if in the given block recursively. It means that you should not do any tasks in the block.

Ractor.current << true
Ractor.receive_if{|msg| Ractor.receive}
#=> `receive': can not call receive/receive_if recursively (Ractor::Error)

Make obj shareable between ractors.

obj and all the objects it refers to will be frozen, unless they are already shareable.

If copy keyword is true, the method will copy objects before freezing them This is safer option but it can take be slower.

Note that the specification and implementation of this method are not mature and may be changed in the future.

obj = ['test']
Ractor.shareable?(obj)     #=> false
Ractor.make_shareable(obj) #=> ["test"]
Ractor.shareable?(obj)     #=> true
obj.frozen?                #=> true
obj[0].frozen?             #=> true

# Copy vs non-copy versions:
obj1 = ['test']
obj1s = Ractor.make_shareable(obj1)
obj1.frozen?                        #=> true
obj1s.object_id == obj1.object_id   #=> true
obj2 = ['test']
obj2s = Ractor.make_shareable(obj2, copy: true)
obj2.frozen?                        #=> false
obj2s.frozen?                       #=> true
obj2s.object_id == obj2.object_id   #=> false
obj2s[0].object_id == obj2[0].object_id #=> false

See also the “Shareable and unshareable objects” section in the Ractor class docs.

Returns an array of the names of the thread-local variables (as Symbols).

thr = Thread.new do
  Thread.current.thread_variable_set(:cat, 'meow')
  Thread.current.thread_variable_set("dog", 'woof')
end
thr.join               #=> #<Thread:0x401b3f10 dead>
thr.thread_variables   #=> [:dog, :cat]

Note that these are not fiber local variables. Please see Thread#[] and Thread#thread_variable_get for more details.