Remove all observers associated with this object.
Return the number of observers associated with this object.
A Gem::Version for the currently running Ruby.
A Gem::Version for the currently running RubyGems
How String Gem paths should be split. Overridable for esoteric platforms.
Returns a new Array with the elements of self in reverse order.
a = ['foo', 'bar', 'two'] a1 = a.reverse a1 # => ["two", "bar", "foo"]
Reverses self in place:
a = ['foo', 'bar', 'two'] a.reverse! # => ["two", "bar", "foo"]
Calls the block, if given, with combinations of elements of self; returns self. The order of combinations is indeterminate.
When a block and an in-range positive Integer argument n (0 < n <= self.size) are given, calls the block with all n-tuple combinations of self.
Example:
a = [0, 1, 2] a.combination(2) {|combination| p combination }
Output:
[0, 1] [0, 2] [1, 2]
Another example:
a = [0, 1, 2] a.combination(3) {|combination| p combination }
Output:
[0, 1, 2]
When n is zero, calls the block once with a new empty Array:
a = [0, 1, 2] a1 = a.combination(0) {|combination| p combination }
Output:
[]
When n is out of range (negative or larger than self.size), does not call the block:
a = [0, 1, 2] a.combination(-1) {|combination| fail 'Cannot happen' } a.combination(4) {|combination| fail 'Cannot happen' }
Returns a new Enumerator if no block given:
a = [0, 1, 2] a.combination(2) # => #<Enumerator: [0, 1, 2]:combination(2)>
Returns the value as a rational. The optional argument eps is always ignored.
Returns the value as a rational if possible (the imaginary part should be exactly zero).
Complex(1.0/3, 0).rationalize #=> (1/3) Complex(1, 0.0).rationalize # RangeError Complex(1, 2).rationalize # RangeError
See to_r.
Returns zero as a rational. The optional argument eps is always ignored.
Returns a new string with the characters from str in reverse order.
"stressed".reverse #=> "desserts"
Reverses str in place.
Returns a simpler approximation of the value (flt-|eps| <= result <= flt+|eps|). If the optional argument eps is not given, it will be chosen automatically.
0.3.rationalize #=> (3/10) 1.333.rationalize #=> (1333/1000) 1.333.rationalize(0.01) #=> (4/3)
See also Float#to_r.
Returns a simpler approximation of the value if the optional argument eps is given (rat-|eps| <= result <= rat+|eps|), self otherwise.
r = Rational(5033165, 16777216) r.rationalize #=> (5033165/16777216) r.rationalize(Rational('0.01')) #=> (3/10) r.rationalize(Rational('0.1')) #=> (1/3)
Reads at most maxlen bytes from the I/O stream. It blocks only if ios has no data immediately available. It doesn’t block if some data available.
If the optional outbuf argument is present, it must reference a String, which will receive the data. The outbuf will contain only the received data after the method call even if it is not empty at the beginning.
It raises EOFError on end of file.
readpartial is designed for streams such as pipe, socket, tty, etc. It blocks only when no data immediately available. This means that it blocks only when following all conditions hold.
the byte buffer in the IO object is empty.
the content of the stream is empty.
the stream is not reached to EOF.
When readpartial blocks, it waits data or EOF on the stream. If some data is reached, readpartial returns with the data. If EOF is reached, readpartial raises EOFError.
When readpartial doesn’t blocks, it returns or raises immediately. If the byte buffer is not empty, it returns the data in the buffer. Otherwise if the stream has some content, it returns the data in the stream. Otherwise if the stream is reached to EOF, it raises EOFError.
r, w = IO.pipe # buffer pipe content w << "abc" # "" "abc". r.readpartial(4096) #=> "abc" "" "" r.readpartial(4096) # blocks because buffer and pipe is empty. r, w = IO.pipe # buffer pipe content w << "abc" # "" "abc" w.close # "" "abc" EOF r.readpartial(4096) #=> "abc" "" EOF r.readpartial(4096) # raises EOFError r, w = IO.pipe # buffer pipe content w << "abc\ndef\n" # "" "abc\ndef\n" r.gets #=> "abc\n" "def\n" "" w << "ghi\n" # "def\n" "ghi\n" r.readpartial(4096) #=> "def\n" "" "ghi\n" r.readpartial(4096) #=> "ghi\n" "" ""
Note that readpartial behaves similar to sysread. The differences are:
If the byte buffer is not empty, read from the byte buffer instead of “sysread for buffered IO (IOError)”.
It doesn’t cause Errno::EWOULDBLOCK and Errno::EINTR. When readpartial meets EWOULDBLOCK and EINTR by read system call, readpartial retry the system call.
The latter means that readpartial is nonblocking-flag insensitive. It blocks on the situation IO#sysread causes Errno::EWOULDBLOCK as if the fd is blocking mode.
Returns true if the set is a superset of the given set.
Returns true if the set and the given set have at least one element in common.
Set[1, 2, 3].intersect? Set[4, 5] #=> false Set[1, 2, 3].intersect? Set[3, 4] #=> true
Sets a socket option. These are protocol and system specific, see your local system documentation for details.
level is an integer, usually one of the SOL_ constants such as Socket::SOL_SOCKET, or a protocol level. A string or symbol of the name, possibly without prefix, is also accepted.
optname is an integer, usually one of the SO_ constants, such as Socket::SO_REUSEADDR. A string or symbol of the name, possibly without prefix, is also accepted.
optval is the value of the option, it is passed to the underlying setsockopt() as a pointer to a certain number of bytes. How this is done depends on the type:
Integer: value is assigned to an int, and a pointer to the int is passed, with length of sizeof(int).
true or false: 1 or 0 (respectively) is assigned to an int, and the int is passed as for an Integer. Note that false must be passed, not nil.
String: the string’s data and length is passed to the socket.
socketoption is an instance of Socket::Option
Some socket options are integers with boolean values, in this case setsockopt could be called like this:
sock.setsockopt(:SOCKET, :REUSEADDR, true) sock.setsockopt(Socket::SOL_SOCKET,Socket::SO_REUSEADDR, true) sock.setsockopt(Socket::Option.bool(:INET, :SOCKET, :REUSEADDR, true))
Some socket options are integers with numeric values, in this case setsockopt could be called like this:
sock.setsockopt(:IP, :TTL, 255) sock.setsockopt(Socket::IPPROTO_IP, Socket::IP_TTL, 255) sock.setsockopt(Socket::Option.int(:INET, :IP, :TTL, 255))
Option values may be structs. Passing them can be complex as it involves examining your system headers to determine the correct definition. An example is an ip_mreq, which may be defined in your system headers as:
struct ip_mreq { struct in_addr imr_multiaddr; struct in_addr imr_interface; };
In this case setsockopt could be called like this:
optval = IPAddr.new("224.0.0.251").hton + IPAddr.new(Socket::INADDR_ANY, Socket::AF_INET).hton sock.setsockopt(Socket::IPPROTO_IP, Socket::IP_ADD_MEMBERSHIP, optval)
Runs the early binding method to set property. The 1st argument specifies dispatch ID, the 2nd argument specifies the array of arguments, the 3rd argument specifies the array of the type of arguments.
excel = WIN32OLE.new('Excel.Application') excel._setproperty(558, [true], [WIN32OLE::VARIANT::VT_BOOL]) # same effect as excel.visible = true
Sets property of OLE object. When you want to set property with argument, you can use this method.
excel = WIN32OLE.new('Excel.Application') excel.Visible = true book = excel.workbooks.add sheet = book.worksheets(1) sheet.setproperty('Cells', 1, 2, 10) # => The B1 cell value is 10.
Reads at most maxlen bytes from the ARGF stream.
If the optional outbuf argument is present, it must reference a String, which will receive the data. The outbuf will contain only the received data after the method call even if it is not empty at the beginning.
It raises EOFError on end of ARGF stream. Since ARGF stream is a concatenation of multiple files, internally EOF is occur for each file. ARGF.readpartial returns empty strings for EOFs except the last one and raises EOFError for the last one.
Sets optional filename and line number that will be used in ERB code evaluation and error reporting. See also filename= and lineno=
erb = ERB.new('<%= some_x %>') erb.render # undefined local variable or method `some_x' # from (erb):1 erb.location = ['file.erb', 3] # All subsequent error reporting would use new location erb.render # undefined local variable or method `some_x' # from file.erb:4
Returns a string for DNS reverse lookup. It returns a string in RFC3172 form for an IPv6 address.