Class

ARGF is a stream designed for use in scripts that process files given as command-line arguments or passed in via STDIN.

The arguments passed to your script are stored in the ARGV Array, one argument per element. ARGF assumes that any arguments that aren’t filenames have been removed from ARGV. For example:

$ ruby argf.rb --verbose file1 file2

ARGV  #=> ["--verbose", "file1", "file2"]
option = ARGV.shift #=> "--verbose"
ARGV  #=> ["file1", "file2"]

You can now use ARGF to work with a concatenation of each of these named files. For instance, ARGF.read will return the contents of file1 followed by the contents of file2.

After a file in ARGV has been read ARGF removes it from the Array. Thus, after all files have been read ARGV will be empty.

You can manipulate ARGV yourself to control what ARGF operates on. If you remove a file from ARGV, it is ignored by ARGF; if you add files to ARGV, they are treated as if they were named on the command line. For example:

ARGV.replace ["file1"]
ARGF.readlines # Returns the contents of file1 as an Array
ARGV           #=> []
ARGV.replace ["file2", "file3"]
ARGF.read      # Returns the contents of file2 and file3

If ARGV is empty, ARGF acts as if it contained STDIN, i.e. the data piped to your script. For example:

$ echo "glark" | ruby -e 'p ARGF.read'
"glark\n"
Instance Methods

Returns the ARGV array, which contains the arguments passed to your script, one per element.

For example:

$ ruby argf.rb -v glark.txt

ARGF.argv   #=> ["-v", "glark.txt"]

Puts ARGF into binary mode. Once a stream is in binary mode, it cannot be reset to non-binary mode. This option has the following effects:

  • Newline conversion is disabled.

  • Encoding conversion is disabled.

  • Content is treated as ASCII-8BIT.

Returns true if ARGF is being read in binary mode; false otherwise. To enable binary mode use ARGF.binmode.

For example:

ARGF.binmode?  #=> false
ARGF.binmode
ARGF.binmode?  #=> true

This is a deprecated alias for each_byte.

This is a deprecated alias for each_char.

Closes the current file and skips to the next file in ARGV. If there are no more files to open, just closes the current file. STDIN will not be closed.

For example:

$ ruby argf.rb foo bar

ARGF.filename  #=> "foo"
ARGF.close
ARGF.filename  #=> "bar"
ARGF.close

Returns true if the current file has been closed; false otherwise. Use ARGF.close to actually close the current file.

This is a deprecated alias for each_codepoint.

Returns an enumerator which iterates over each line (separated by sep, which defaults to your platform’s newline character) of each file in ARGV. If a block is supplied, each line in turn will be yielded to the block, otherwise an enumerator is returned. The optional limit argument is an Integer specifying the maximum length of each line; longer lines will be split according to this limit.

This method allows you to treat the files supplied on the command line as a single file consisting of the concatenation of each named file. After the last line of the first file has been returned, the first line of the second file is returned. The ARGF.filename and ARGF.lineno methods can be used to determine the filename of the current line and line number of the whole input, respectively.

For example, the following code prints out each line of each named file prefixed with its line number, displaying the filename once per file:

ARGF.each_line do |line|
  puts ARGF.filename if ARGF.file.lineno == 1
  puts "#{ARGF.file.lineno}: #{line}"
end

While the following code prints only the first file’s name at first, and the contents with line number counted through all named files.

ARGF.each_line do |line|
  puts ARGF.filename if ARGF.lineno == 1
  puts "#{ARGF.lineno}: #{line}"
end

Iterates over each byte of each file in ARGV. A byte is returned as an Integer in the range 0..255.

This method allows you to treat the files supplied on the command line as a single file consisting of the concatenation of each named file. After the last byte of the first file has been returned, the first byte of the second file is returned. The ARGF.filename method can be used to determine the filename of the current byte.

If no block is given, an enumerator is returned instead.

For example:

ARGF.bytes.to_a  #=> [35, 32, ... 95, 10]

Iterates over each character of each file in ARGF.

This method allows you to treat the files supplied on the command line as a single file consisting of the concatenation of each named file. After the last character of the first file has been returned, the first character of the second file is returned. The ARGF.filename method can be used to determine the name of the file in which the current character appears.

If no block is given, an enumerator is returned instead.

Iterates over each codepoint of each file in ARGF.

This method allows you to treat the files supplied on the command line as a single file consisting of the concatenation of each named file. After the last codepoint of the first file has been returned, the first codepoint of the second file is returned. The ARGF.filename method can be used to determine the name of the file in which the current codepoint appears.

If no block is given, an enumerator is returned instead.

Returns true if the current file in ARGF is at end of file, i.e. it has no data to read. The stream must be opened for reading or an IOError will be raised.

$ echo "eof" | ruby argf.rb

ARGF.eof?                 #=> false
3.times { ARGF.readchar }
ARGF.eof?                 #=> false
ARGF.readchar             #=> "\n"
ARGF.eof?                 #=> true

Returns the external encoding for files read from ARGF as an Encoding object. The external encoding is the encoding of the text as stored in a file. Contrast with ARGF.internal_encoding, which is the encoding used to represent this text within Ruby.

To set the external encoding use ARGF.set_encoding.

For example:

ARGF.external_encoding  #=>  #<Encoding:UTF-8>

Returns the current file as an IO or File object. $stdin is returned when the current file is STDIN.

For example:

$ echo "foo" > foo
$ echo "bar" > bar

$ ruby argf.rb foo bar

ARGF.file      #=> #<File:foo>
ARGF.read(5)   #=> "foo\nb"
ARGF.file      #=> #<File:bar>

Returns the current filename. “-” is returned when the current file is STDIN.

For example:

$ echo "foo" > foo
$ echo "bar" > bar
$ echo "glark" > glark

$ ruby argf.rb foo bar glark

ARGF.filename  #=> "foo"
ARGF.read(5)   #=> "foo\nb"
ARGF.filename  #=> "bar"
ARGF.skip
ARGF.filename  #=> "glark"

Returns an integer representing the numeric file descriptor for the current file. Raises an ArgumentError if there isn’t a current file.

ARGF.fileno    #=> 3

Gets the next 8-bit byte (0..255) from ARGF. Returns nil if called at the end of the stream.

For example:

$ echo "foo" > file
$ ruby argf.rb file

ARGF.getbyte #=> 102
ARGF.getbyte #=> 111
ARGF.getbyte #=> 111
ARGF.getbyte #=> 10
ARGF.getbyte #=> nil

Reads the next character from ARGF and returns it as a String. Returns nil at the end of the stream.

ARGF treats the files named on the command line as a single file created by concatenating their contents. After returning the last character of the first file, it returns the first character of the second file, and so on.

For example:

$ echo "foo" > file
$ ruby argf.rb file

ARGF.getc  #=> "f"
ARGF.getc  #=> "o"
ARGF.getc  #=> "o"
ARGF.getc  #=> "\n"
ARGF.getc  #=> nil
ARGF.getc  #=> nil

Returns the next line from the current file in ARGF.

By default lines are assumed to be separated by $/; to use a different character as a separator, supply it as a String for the sep argument.

The optional limit argument specifies how many characters of each line to return. By default all characters are returned.

See IO.readlines for details about getline_args.

Returns the file extension appended to the names of modified files under in-place edit mode. This value can be set using ARGF.inplace_mode= or passing the -i switch to the Ruby binary.

Sets the filename extension for in-place editing mode to the given String. Each file being edited has this value appended to its filename. The modified file is saved under this new name.

For example:

$ ruby argf.rb file.txt

ARGF.inplace_mode = '.bak'
ARGF.each_line do |line|
  print line.sub("foo","bar")
end

Each line of file.txt has the first occurrence of “foo” replaced with “bar”, then the new line is written out to file.txt.bak.

An alias for to_s

Returns the internal encoding for strings read from ARGF as an Encoding object.

If ARGF.set_encoding has been called with two encoding names, the second is returned. Otherwise, if Encoding.default_external has been set, that value is returned. Failing that, if a default external encoding was specified on the command-line, that value is used. If the encoding is unknown, nil is returned.

Returns the current line number of ARGF as a whole. This value can be set manually with ARGF.lineno=.

For example:

ARGF.lineno   #=> 0
ARGF.readline #=> "This is line 1\n"
ARGF.lineno   #=> 1

Sets the line number of ARGF as a whole to the given Integer.

ARGF sets the line number automatically as you read data, so normally you will not need to set it explicitly. To access the current line number use ARGF.lineno.

For example:

ARGF.lineno      #=> 0
ARGF.readline    #=> "This is line 1\n"
ARGF.lineno      #=> 1
ARGF.lineno = 0  #=> 0
ARGF.lineno      #=> 0

This is a deprecated alias for each_line.

Seeks to the position given by position (in bytes) in ARGF.

For example:

ARGF.pos = 17
ARGF.gets   #=> "This is line two\n"

Writes the given object(s) to ios. Returns nil.

The stream must be opened for writing. Each given object that isn’t a string will be converted by calling its to_s method. When called without arguments, prints the contents of $_.

If the output field separator ($,) is not nil, it is inserted between objects. If the output record separator ($\) is not nil, it is appended to the output.

$stdout.print("This is ", 100, " percent.\n")

produces:

This is 100 percent.

Formats and writes to ios, converting parameters under control of the format string. See Kernel#sprintf for details.

If obj is Numeric, write the character whose code is the least-significant byte of obj. If obj is String, write the first character of obj to ios. Otherwise, raise TypeError.

$stdout.putc "A"
$stdout.putc 65

produces:

AA

Writes the given object(s) to ios. Writes a newline after any that do not already end with a newline sequence. Returns nil.

The stream must be opened for writing. If called with an array argument, writes each element on a new line. Each given object that isn’t a string or array will be converted by calling its to_s method. If called without arguments, outputs a single newline.

$stdout.puts("this", "is", ["a", "test"])

produces:

this
is
a
test

Note that puts always uses newlines and is not affected by the output record separator ($\).

Reads length bytes from ARGF. The files named on the command line are concatenated and treated as a single file by this method, so when called without arguments the contents of this pseudo file are returned in their entirety.

length must be a non-negative integer or nil.

If length is a positive integer, read tries to read length bytes without any conversion (binary mode). It returns nil if an EOF is encountered before anything can be read. Fewer than length bytes are returned if an EOF is encountered during the read. In the case of an integer length, the resulting string is always in ASCII-8BIT encoding.

If length is omitted or is nil, it reads until EOF and the encoding conversion is applied, if applicable. A string is returned even if EOF is encountered before any data is read.

If length is zero, it returns an empty string ("").

If the optional outbuf argument is present, it must reference a String, which will receive the data. The outbuf will contain only the received data after the method call even if it is not empty at the beginning.

For example:

$ echo "small" > small.txt
$ echo "large" > large.txt
$ ./glark.rb small.txt large.txt

ARGF.read      #=> "small\nlarge"
ARGF.read(200) #=> "small\nlarge"
ARGF.read(2)   #=> "sm"
ARGF.read(0)   #=> ""

Note that this method behaves like the fread() function in C. This means it retries to invoke read(2) system calls to read data with the specified length. If you need the behavior like a single read(2) system call, consider ARGF#readpartial or ARGF#read_nonblock.

Reads at most maxlen bytes from the ARGF stream in non-blocking mode.

Reads the next 8-bit byte from ARGF and returns it as an Integer. Raises an EOFError after the last byte of the last file has been read.

For example:

$ echo "foo" > file
$ ruby argf.rb file

ARGF.readbyte  #=> 102
ARGF.readbyte  #=> 111
ARGF.readbyte  #=> 111
ARGF.readbyte  #=> 10
ARGF.readbyte  #=> end of file reached (EOFError)

Reads the next character from ARGF and returns it as a String. Raises an EOFError after the last character of the last file has been read.

For example:

$ echo "foo" > file
$ ruby argf.rb file

ARGF.readchar  #=> "f"
ARGF.readchar  #=> "o"
ARGF.readchar  #=> "o"
ARGF.readchar  #=> "\n"
ARGF.readchar  #=> end of file reached (EOFError)

Returns the next line from the current file in ARGF.

By default lines are assumed to be separated by $/; to use a different character as a separator, supply it as a String for the sep argument.

The optional limit argument specifies how many characters of each line to return. By default all characters are returned.

An EOFError is raised at the end of the file.

Reads ARGF‘s current file in its entirety, returning an Array of its lines, one line per element. Lines are assumed to be separated by sep.

lines = ARGF.readlines
lines[0]                #=> "This is line one\n"

Reads at most maxlen bytes from the ARGF stream.

If the optional outbuf argument is present, it must reference a String, which will receive the data. The outbuf will contain only the received data after the method call even if it is not empty at the beginning.

It raises EOFError on end of ARGF stream. Since ARGF stream is a concatenation of multiple files, internally EOF is occur for each file. ARGF.readpartial returns empty strings for EOFs except the last one and raises EOFError for the last one.

Positions the current file to the beginning of input, resetting ARGF.lineno to zero.

ARGF.readline   #=> "This is line one\n"
ARGF.rewind     #=> 0
ARGF.lineno     #=> 0
ARGF.readline   #=> "This is line one\n"

Seeks to offset amount (an Integer) in the ARGF stream according to the value of whence. See IO#seek for further details.

If single argument is specified, strings read from ARGF are tagged with the encoding specified.

If two encoding names separated by a colon are given, e.g. “ascii:utf-8”, the read string is converted from the first encoding (external encoding) to the second encoding (internal encoding), then tagged with the second encoding.

If two arguments are specified, they must be encoding objects or encoding names. Again, the first specifies the external encoding; the second specifies the internal encoding.

If the external encoding and the internal encoding are specified, the optional Hash argument can be used to adjust the conversion process. The structure of this hash is explained in the String#encode documentation.

For example:

ARGF.set_encoding('ascii')         # Tag the input as US-ASCII text
ARGF.set_encoding(Encoding::UTF_8) # Tag the input as UTF-8 text
ARGF.set_encoding('utf-8','ascii') # Transcode the input from US-ASCII
                                   # to UTF-8.

Sets the current file to the next file in ARGV. If there aren’t any more files it has no effect.

For example:

$ ruby argf.rb foo bar
ARGF.filename  #=> "foo"
ARGF.skip
ARGF.filename  #=> "bar"

Returns the current offset (in bytes) of the current file in ARGF.

ARGF.pos    #=> 0
ARGF.gets   #=> "This is line one\n"
ARGF.pos    #=> 17

Returns an IO object representing the current file. This will be a File object unless the current file is a stream such as STDIN.

For example:

ARGF.to_io    #=> #<File:glark.txt>
ARGF.to_io    #=> #<IO:<STDIN>>

Returns “ARGF”.

Returns IO instance tied to ARGF for writing if inplace mode is enabled.

Writes string if inplace mode.