Range

Class

A Range represents an interval—a set of values with a beginning and an end. Ranges may be constructed using the s..e and s...e literals, or with Range::new. Ranges constructed using .. run from the beginning to the end inclusively. Those created using ... exclude the end value. When used as an iterator, ranges return each value in the sequence.

(-1..-5).to_a      #=> []
(-5..-1).to_a      #=> [-5, -4, -3, -2, -1]
('a'..'e').to_a    #=> ["a", "b", "c", "d", "e"]
('a'...'e').to_a   #=> ["a", "b", "c", "d"]

Custom Objects in Ranges

Ranges can be constructed using any objects that can be compared using the <=> operator. Methods that treat the range as a sequence (each and methods inherited from Enumerable) expect the begin object to implement a succ method to return the next object in sequence. The step and include? methods require the begin object to implement succ or to be numeric.

In the Xs class below both <=> and succ are implemented so Xs can be used to construct ranges. Note that the Comparable module is included so the == method is defined in terms of <=>.

class Xs                # represent a string of 'x's
  include Comparable
  attr :length
  def initialize(n)
    @length = n
  end
  def succ
    Xs.new(@length + 1)
  end
  def <=>(other)
    @length <=> other.length
  end
  def to_s
    sprintf "%2d #{inspect}", @length
  end
  def inspect
    'x' * @length
  end
end

An example of using Xs to construct a range:

r = Xs.new(3)..Xs.new(6)   #=> xxx..xxxxxx
r.to_a                     #=> [xxx, xxxx, xxxxx, xxxxxx]
r.member?(Xs.new(5))       #=> true
Class Methods

json_create(object)
::

Deserializes JSON string by constructing new Range object with arguments a serialized by to_json.

Range.new(begin, end, exclude_end=false) → rng
::

Constructs a range using the given begin and end. If the exclude_end parameter is omitted or is false, the rng will include the end object; otherwise, it will be excluded.

Instance Methods

rng == obj → true or false
#

Returns true only if obj is a Range, has equivalent begin and end items (by comparing them with ==), and has the same exclude_end? setting as the range.

(0..2) == (0..2)            #=> true
(0..2) == Range.new(0,2)    #=> true
(0..2) == (0...2)           #=> false

rng === obj → true or false
#

Returns true if obj is an element of the range, false otherwise. Conveniently, === is the comparison operator used by case statements.

case 79
when 1..50   then   print "low\n"
when 51..75  then   print "medium\n"
when 76..100 then   print "high\n"
end

produces:

high

as_json(*)
#

Returns a hash, that will be turned into a JSON object and represent this object.

rng.begin → obj
#

Returns the object that defines the beginning of the range.

(1..10).begin   #=> 1

rng.bsearch {|obj| block } → value
#

By using binary search, finds a value in range which meets the given condition in O(log n) where n is the size of the range.

You can use this method in two use cases: a find-minimum mode and a find-any mode. In either case, the elements of the range must be monotone (or sorted) with respect to the block.

In find-minimum mode (this is a good choice for typical use case), the block must return true or false, and there must be a value x so that:

  • the block returns false for any value which is less than x, and

  • the block returns true for any value which is greater than or equal to x.

If x is within the range, this method returns the value x. Otherwise, it returns nil.

ary = [0, 4, 7, 10, 12]
(0...ary.size).bsearch {|i| ary[i] >= 4 } #=> 1
(0...ary.size).bsearch {|i| ary[i] >= 6 } #=> 2
(0...ary.size).bsearch {|i| ary[i] >= 8 } #=> 3
(0...ary.size).bsearch {|i| ary[i] >= 100 } #=> nil

(0.0...Float::INFINITY).bsearch {|x| Math.log(x) >= 0 } #=> 1.0

In find-any mode (this behaves like libc’s bsearch(3)), the block must return a number, and there must be two values x and y (x <= y) so that:

  • the block returns a positive number for v if v < x,

  • the block returns zero for v if x <= v < y, and

  • the block returns a negative number for v if y <= v.

This method returns any value which is within the intersection of the given range and x…y (if any). If there is no value that satisfies the condition, it returns nil.

ary = [0, 100, 100, 100, 200]
(0..4).bsearch {|i| 100 - ary[i] } #=> 1, 2 or 3
(0..4).bsearch {|i| 300 - ary[i] } #=> nil
(0..4).bsearch {|i|  50 - ary[i] } #=> nil

You must not mix the two modes at a time; the block must always return either true/false, or always return a number. It is undefined which value is actually picked up at each iteration.

rng.cover?(obj) → true or false
#

Returns true if obj is between the begin and end of the range.

This tests begin <= obj <= end when exclude_end? is false and begin <= obj < end when exclude_end? is true.

("a".."z").cover?("c")    #=> true
("a".."z").cover?("5")    #=> false
("a".."z").cover?("cc")   #=> true

rng.each {| i | block } → rng

rng.each → an_enumerator
#

Iterates over the elements of range, passing each in turn to the block.

The each method can only be used if the begin object of the range supports the succ method. A TypeError is raised if the object does not have succ method defined (like Float).

If no block is given, an enumerator is returned instead.

(10..15).each {|n| print n, ' ' }
# prints: 10 11 12 13 14 15

(2.5..5).each {|n| print n, ' ' }
# raises: TypeError: can't iterate from Float

rng.end → obj
#

Returns the object that defines the end of the range.

(1..10).end    #=> 10
(1...10).end   #=> 10

rng.eql?(obj) → true or false
#

Returns true only if obj is a Range, has equivalent begin and end items (by comparing them with eql?), and has the same exclude_end? setting as the range.

(0..2).eql?(0..2)            #=> true
(0..2).eql?(Range.new(0,2))  #=> true
(0..2).eql?(0...2)           #=> false

rng.exclude_end? → true or false
#

Returns true if the range excludes its end value.

(1..5).exclude_end?     #=> false
(1...5).exclude_end?    #=> true

rng.first → obj

rng.first(n) → an_array
#

Returns the first object in the range, or an array of the first n elements.

(10..20).first     #=> 10
(10..20).first(3)  #=> [10, 11, 12]

rng.hash → integer
#

Compute a hash-code for this range. Two ranges with equal begin and end points (using eql?), and the same exclude_end? value will generate the same hash-code.

See also Object#hash.

rng.include?(obj) → true or false
#
An alias for member?

rng.inspect → string
#

Convert this range object to a printable form (using inspect to convert the begin and end objects).

rng.last → obj

rng.last(n) → an_array
#

Returns the last object in the range, or an array of the last n elements.

Note that with no arguments last will return the object that defines the end of the range even if exclude_end? is true.

(10..20).last      #=> 20
(10...20).last     #=> 20
(10..20).last(3)   #=> [18, 19, 20]
(10...20).last(3)  #=> [17, 18, 19]

rng.max → obj

rng.max {| a,b | block } → obj

rng.max(n) → obj

rng.max(n) {| a,b | block } → obj
#

Returns the maximum value in the range. Returns nil if the begin value of the range larger than the end value. Returns nil if the begin value of an exclusive range is equal to the end value.

Can be given an optional block to override the default comparison method a <=> b.

(10..20).max    #=> 20

rng.member?(obj) → true or false
#

Returns true if obj is an element of the range, false otherwise. If begin and end are numeric, comparison is done according to the magnitude of the values.

("a".."z").include?("g")   #=> true
("a".."z").include?("A")   #=> false
("a".."z").include?("cc")  #=> false

rng.min → obj

rng.min {| a,b | block } → obj

rng.min(n) → array

rng.min(n) {| a,b | block } → array
#

Returns the minimum value in the range. Returns nil if the begin value of the range is larger than the end value. Returns nil if the begin value of an exclusive range is equal to the end value.

Can be given an optional block to override the default comparison method a <=> b.

(10..20).min    #=> 10

rng.size → num
#

Returns the number of elements in the range. Both the begin and the end of the Range must be Numeric, otherwise nil is returned.

(10..20).size    #=> 11
('a'..'z').size  #=> nil
(-Float::INFINITY..Float::INFINITY).size #=> Infinity

rng.step(n=1) {| obj | block } → rng

rng.step(n=1) → an_enumerator
#

Iterates over the range, passing each nth element to the block. If begin and end are numeric, n is added for each iteration. Otherwise step invokes succ to iterate through range elements.

If no block is given, an enumerator is returned instead.

range = Xs.new(1)..Xs.new(10)
range.step(2) {|x| puts x}
puts
range.step(3) {|x| puts x}

produces:

 1 x
 3 xxx
 5 xxxxx
 7 xxxxxxx
 9 xxxxxxxxx

 1 x
 4 xxxx
 7 xxxxxxx
10 xxxxxxxxxx

See Range for the definition of class Xs.

to_json(*args)
#

Stores class name (Range) with JSON array of arguments a which include first (integer), last (integer), and exclude_end? (boolean) as JSON string.

rng.to_s → string
#

Convert this range object to a printable form (using to_s to convert the begin and end objects).