Zlib::GzipReader is the class for reading a gzipped file. GzipReader should be used as an IO, or -IO-like, object.
Zlib::GzipReader.open('hoge.gz') {|gz| print gz.read } File.open('hoge.gz') do |f| gz = Zlib::GzipReader.new(f) print gz.read gz.close end
Method Catalogue
The following methods in Zlib::GzipReader are just like their counterparts in IO, but they raise Zlib::Error or Zlib::GzipFile::Error exception if an error was found in the gzip file.
Be careful of the footer of the gzip file. A gzip file has the checksum of pre-compressed data in its footer. GzipReader checks all uncompressed data against that checksum at the following cases, and if it fails, raises Zlib::GzipFile::NoFooter, Zlib::GzipFile::CRCError, or Zlib::GzipFile::LengthError exception.
-
When an reading request is received beyond the end of file (the end of compressed data). That is, when
Zlib::GzipReader#read,Zlib::GzipReader#gets, or some other methods for reading returns nil. -
When
Zlib::GzipFile#closemethod is called after the object reaches the end of file. -
When
Zlib::GzipReader#unusedmethod is called after the object reaches the end of file.
The rest of the methods are adequately described in their own documentation.
static VALUE
rb_gzreader_initialize(int argc, VALUE *argv, VALUE obj)
{
VALUE io, opt = Qnil;
struct gzfile *gz;
int err;
TypedData_Get_Struct(obj, struct gzfile, &gzfile_data_type, gz);
rb_scan_args(argc, argv, "1:", &io, &opt);
/* this is undocumented feature of zlib */
err = inflateInit2(&gz->z.stream, -MAX_WBITS);
if (err != Z_OK) {
raise_zlib_error(err, gz->z.stream.msg);
}
gz->io = io;
ZSTREAM_READY(&gz->z);
gzfile_read_header(gz);
rb_gzfile_ecopts(gz, opt);
if (rb_respond_to(io, id_path)) {
gz->path = rb_funcall(gz->io, id_path, 0);
rb_define_singleton_method(obj, "path", rb_gzfile_path, 0);
}
return obj;
}
Creates a GzipReader object associated with io. The GzipReader object reads gzipped data from io, and parses/decompresses it. The io must have a read method that behaves same as the IO#read.
The options hash may be used to set the encoding of the data. :external_encoding, :internal_encoding and :encoding may be set as in IO::new.
If the gzip file header is incorrect, raises an Zlib::GzipFile::Error exception.
static VALUE
rb_gzreader_s_open(int argc, VALUE *argv, VALUE klass)
{
return gzfile_s_open(argc, argv, klass, "rb");
}
Opens a file specified by filename as a gzipped file, and returns a GzipReader object associated with that file. Further details of this method are in Zlib::GzipReader.new and ZLib::GzipFile.wrap.
static VALUE
rb_gzreader_bytes(VALUE obj)
{
rb_warn("Zlib::GzipReader#bytes is deprecated; use #each_byte instead");
if (!rb_block_given_p())
return rb_enumeratorize(obj, ID2SYM(rb_intern("each_byte")), 0, 0);
return rb_gzreader_each_byte(obj);
}
This is a deprecated alias for each_byte.
static VALUE
rb_gzreader_each(int argc, VALUE *argv, VALUE obj)
{
VALUE str;
RETURN_ENUMERATOR(obj, 0, 0);
while (!NIL_P(str = gzreader_gets(argc, argv, obj))) {
rb_yield(str);
}
return obj;
}
See Zlib::GzipReader documentation for a description.
static VALUE
rb_gzreader_each_byte(VALUE obj)
{
VALUE c;
RETURN_ENUMERATOR(obj, 0, 0);
while (!NIL_P(c = rb_gzreader_getbyte(obj))) {
rb_yield(c);
}
return Qnil;
}
See Zlib::GzipReader documentation for a description.
static VALUE
rb_gzreader_each_char(VALUE obj)
{
VALUE c;
RETURN_ENUMERATOR(obj, 0, 0);
while (!NIL_P(c = rb_gzreader_getc(obj))) {
rb_yield(c);
}
return Qnil;
}
See Zlib::GzipReader documentation for a description.
static VALUE
rb_gzfile_eof_p(VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
return GZFILE_IS_FINISHED(gz) ? Qtrue : Qfalse;
}
Returns true or false whether the stream has reached the end.
static VALUE
rb_gzreader_external_encoding(VALUE self)
{
return rb_enc_from_encoding(get_gzfile(self)->enc);
}
See Zlib::GzipReader documentation for a description.
static VALUE
rb_gzreader_getbyte(VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
VALUE dst;
dst = gzfile_read(gz, 1);
if (!NIL_P(dst)) {
dst = INT2FIX((unsigned int)(RSTRING_PTR(dst)[0]) & 0xff);
}
return dst;
}
See Zlib::GzipReader documentation for a description.
static VALUE
rb_gzreader_getc(VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
return gzfile_getc(gz);
}
See Zlib::GzipReader documentation for a description.
static VALUE
rb_gzreader_gets(int argc, VALUE *argv, VALUE obj)
{
VALUE dst;
dst = gzreader_gets(argc, argv, obj);
if (!NIL_P(dst)) {
rb_lastline_set(dst);
}
return dst;
}
See Zlib::GzipReader documentation for a description.
static VALUE
rb_gzfile_lineno(VALUE obj)
{
return INT2NUM(get_gzfile(obj)->lineno);
}
The line number of the last row read from this file.
static VALUE
rb_gzfile_set_lineno(VALUE obj, VALUE lineno)
{
struct gzfile *gz = get_gzfile(obj);
gz->lineno = NUM2INT(lineno);
return lineno;
}
Specify line number of the last row read from this file.
static VALUE
rb_gzreader_lines(int argc, VALUE *argv, VALUE obj)
{
rb_warn("Zlib::GzipReader#lines is deprecated; use #each_line instead");
if (!rb_block_given_p())
return rb_enumeratorize(obj, ID2SYM(rb_intern("each_line")), argc, argv);
return rb_gzreader_each(argc, argv, obj);
}
This is a deprecated alias for each_line.
static VALUE
rb_gzfile_total_out(VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
uLong total_out = gz->z.stream.total_out;
long buf_filled = gz->z.buf_filled;
if (total_out >= (uLong)buf_filled) {
return rb_uint2inum(total_out - buf_filled);
} else {
return LONG2FIX(-(buf_filled - (long)total_out));
}
}
Total number of output bytes output so far.
static VALUE
rb_gzreader_read(int argc, VALUE *argv, VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
VALUE vlen;
long len;
rb_scan_args(argc, argv, "01", &vlen);
if (NIL_P(vlen)) {
return gzfile_read_all(gz);
}
len = NUM2INT(vlen);
if (len < 0) {
rb_raise(rb_eArgError, "negative length %ld given", len);
}
return gzfile_read(gz, len);
}
See Zlib::GzipReader documentation for a description.
static VALUE
rb_gzreader_readbyte(VALUE obj)
{
VALUE dst;
dst = rb_gzreader_getbyte(obj);
if (NIL_P(dst)) {
rb_raise(rb_eEOFError, "end of file reached");
}
return dst;
}
See Zlib::GzipReader documentation for a description.
static VALUE
rb_gzreader_readchar(VALUE obj)
{
VALUE dst;
dst = rb_gzreader_getc(obj);
if (NIL_P(dst)) {
rb_raise(rb_eEOFError, "end of file reached");
}
return dst;
}
See Zlib::GzipReader documentation for a description.
static VALUE
rb_gzreader_readline(int argc, VALUE *argv, VALUE obj)
{
VALUE dst;
dst = rb_gzreader_gets(argc, argv, obj);
if (NIL_P(dst)) {
rb_raise(rb_eEOFError, "end of file reached");
}
return dst;
}
See Zlib::GzipReader documentation for a description.
static VALUE
rb_gzreader_readlines(int argc, VALUE *argv, VALUE obj)
{
VALUE str, dst;
dst = rb_ary_new();
while (!NIL_P(str = gzreader_gets(argc, argv, obj))) {
rb_ary_push(dst, str);
}
return dst;
}
See Zlib::GzipReader documentation for a description.
static VALUE
rb_gzreader_readpartial(int argc, VALUE *argv, VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
VALUE vlen, outbuf;
long len;
rb_scan_args(argc, argv, "11", &vlen, &outbuf);
len = NUM2INT(vlen);
if (len < 0) {
rb_raise(rb_eArgError, "negative length %ld given", len);
}
if (!NIL_P(outbuf))
Check_Type(outbuf, T_STRING);
return gzfile_readpartial(gz, len, outbuf);
}
Reads at most maxlen bytes from the gziped stream but it blocks only if gzipreader has no data immediately available. If the optional outbuf argument is present, it must reference a String, which will receive the data. It raises EOFError on end of file.
static VALUE
rb_gzreader_rewind(VALUE obj)
{
struct gzfile *gz = get_gzfile(obj);
gzfile_reader_rewind(gz);
return INT2FIX(0);
}
Resets the position of the file pointer to the point created the GzipReader object. The associated IO object needs to respond to the seek method.
static VALUE
rb_gzreader_ungetbyte(VALUE obj, VALUE ch)
{
struct gzfile *gz = get_gzfile(obj);
gzfile_ungetbyte(gz, NUM2CHR(ch));
return Qnil;
}
See Zlib::GzipReader documentation for a description.
static VALUE
rb_gzreader_ungetc(VALUE obj, VALUE s)
{
struct gzfile *gz;
if (FIXNUM_P(s))
return rb_gzreader_ungetbyte(obj, s);
gz = get_gzfile(obj);
StringValue(s);
if (gz->enc2 && gz->enc2 != rb_ascii8bit_encoding()) {
s = rb_str_conv_enc(s, rb_enc_get(s), gz->enc2);
}
gzfile_ungets(gz, (const Bytef*)RSTRING_PTR(s), RSTRING_LEN(s));
RB_GC_GUARD(s);
return Qnil;
}
See Zlib::GzipReader documentation for a description.
static VALUE
rb_gzreader_unused(VALUE obj)
{
struct gzfile *gz;
TypedData_Get_Struct(obj, struct gzfile, &gzfile_data_type, gz);
return gzfile_reader_get_unused(gz);
}
Returns the rest of the data which had read for parsing gzip format, or nil if the whole gzip file is not parsed yet.