Reads at most maxlen bytes from ios using the read(2) system call after O_NONBLOCK is set for the underlying file descriptor.
If the optional outbuf argument is present, it must reference a String, which will receive the data. The outbuf will contain only the received data after the method call even if it is not empty at the beginning.
read_nonblock just calls the read(2) system call. It causes all errors the read(2) system call causes: Errno::EWOULDBLOCK, Errno::EINTR, etc. The caller should care such errors.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying read_nonblock.
read_nonblock causes EOFError on EOF.
If the read byte buffer is not empty, read_nonblock reads from the buffer like readpartial. In this case, the read(2) system call is not called.
When read_nonblock raises an exception kind of IO::WaitReadable, read_nonblock should not be called until io is readable for avoiding busy loop. This can be done as follows.
# emulates blocking read (readpartial). begin result = io.read_nonblock(maxlen) rescue IO::WaitReadable IO.select([io]) retry end
Although IO#read_nonblock doesn’t raise IO::WaitWritable. OpenSSL::Buffering#read_nonblock can raise IO::WaitWritable. If IO and SSL should be used polymorphically, IO::WaitWritable should be rescued too. See the document of OpenSSL::Buffering#read_nonblock for sample code.
Note that this method is identical to readpartial except the non-blocking flag is set.
By specifying ‘exception: false`, the options hash allows you to indicate that read_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Deserializes JSON string by constructing new Regexp object with source s (Regexp or String) and options o serialized by to_json
Returns true if this class can be used to create an instance from a serialised JSON string. The class has to implement a class method json_create that expects a hash as first parameter. The hash should include the required data.
Receives up to maxlen bytes from socket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The first element of the results, mesg, is the data received. The second element, sender_addrinfo, contains protocol-specific address information of the sender.
When recvfrom(2) returns 0, Socket#recvfrom_nonblock returns an empty string as data. The meaning depends on the socket: EOF on TCP, empty packet on UDP, etc.
maxlen - the maximum number of bytes to receive from the socket
flags - zero or more of the MSG_ options
outbuf - destination String buffer
opts - keyword hash, supporting ‘exception: false`
# In one file, start this first require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.bind(sockaddr) socket.listen(5) client, client_addrinfo = socket.accept begin # emulate blocking recvfrom pair = client.recvfrom_nonblock(20) rescue IO::WaitReadable IO.select([client]) retry end data = pair[0].chomp puts "I only received 20 bytes '#{data}'" sleep 1 socket.close # In another file, start this second require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.connect(sockaddr) socket.puts "Watch this get cut short!" socket.close
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recvfrom_nonblock fails.
Socket#recvfrom_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recvfrom_nonblock.
By specifying ‘exception: false`, the options hash allows you to indicate that accept_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Receives up to maxlen bytes from socket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The result, mesg, is the data received.
When recvfrom(2) returns 0, Socket#recv_nonblock returns an empty string as data. The meaning depends on the socket: EOF on TCP, empty packet on UDP, etc.
maxlen - the number of bytes to receive from the socket
flags - zero or more of the MSG_ options
options - keyword hash, supporting ‘exception: false`
serv = TCPServer.new("127.0.0.1", 0) af, port, host, addr = serv.addr c = TCPSocket.new(addr, port) s = serv.accept c.send "aaa", 0 begin # emulate blocking recv. p s.recv_nonblock(10) #=> "aaa" rescue IO::WaitReadable IO.select([s]) retry end
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recv_nonblock fails.
BasicSocket#recv_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recv_nonblock.
By specifying ‘exception: false`, the options hash allows you to indicate that recv_nonblock should not raise an IO::WaitWritable exception, but return the symbol :wait_writable instead.
recvmsg receives a message using recvmsg(2) system call in non-blocking manner.
It is similar to BasicSocket#recvmsg but non-blocking flag is set before the system call and it doesn’t retry the system call.
By specifying ‘exception: false`, the opts hash allows you to indicate that recvmsg_nonblock should not raise an IO::WaitWritable exception, but return the symbol :wait_writable instead.
Receives up to maxlen bytes from udpsocket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. If maxlen is omitted, its default value is 65536. flags is zero or more of the MSG_ options. The first element of the results, mesg, is the data received. The second element, sender_inet_addr, is an array to represent the sender address.
When recvfrom(2) returns 0, Socket#recvfrom_nonblock returns an empty string as data. It means an empty packet.
maxlen - the number of bytes to receive from the socket
flags - zero or more of the MSG_ options
outbuf - destination String buffer
options - keyword hash, supporting ‘exception: false`
require 'socket' s1 = UDPSocket.new s1.bind("127.0.0.1", 0) s2 = UDPSocket.new s2.bind("127.0.0.1", 0) s2.connect(*s1.addr.values_at(3,1)) s1.connect(*s2.addr.values_at(3,1)) s1.send "aaa", 0 begin # emulate blocking recvfrom p s2.recvfrom_nonblock(10) #=> ["aaa", ["AF_INET", 33302, "localhost.localdomain", "127.0.0.1"]] rescue IO::WaitReadable IO.select([s2]) retry end
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recvfrom_nonblock fails.
UDPSocket#recvfrom_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recvfrom_nonblock.
By specifying ‘exception: false`, the options hash allows you to indicate that recvmsg_nonblock should not raise an IO::WaitWritable exception, but return the symbol :wait_writable instead.
s.rest_size is equivalent to s.rest.size.
Defines the callback event. If argument is omitted, this method defines the callback of all events. If you want to modify reference argument in callback, return hash in callback. If you want to return value to OLE server as result of callback use ‘return’ or :return.
ie = WIN32OLE.new('InternetExplorer.Application')
ev = WIN32OLE_EVENT.new(ie)
ev.on_event("NavigateComplete") {|url| puts url}
ev.on_event() {|ev, *args| puts "#{ev} fired"}
ev.on_event("BeforeNavigate2") {|*args|
...
# set true to BeforeNavigate reference argument `Cancel'.
# Cancel is 7-th argument of BeforeNavigate,
# so you can use 6 as key of hash instead of 'Cancel'.
# The argument is counted from 0.
# The hash key of 0 means first argument.)
{:Cancel => true} # or {'Cancel' => true} or {6 => true}
}
ev.on_event(...) {|*args|
{:return => 1, :xxx => yyy}
}
Returns major version.
tobj = WIN32OLE_TYPE.new('Microsoft Word 10.0 Object Library', 'Documents') puts tobj.major_version # => 8
Returns minor version.
tobj = WIN32OLE_TYPE.new('Microsoft Word 10.0 Object Library', 'Documents') puts tobj.minor_version # => 2
Returns the type library major version.
tlib = WIN32OLE_TYPELIB.new('Microsoft Excel 9.0 Object Library') puts tlib.major_version # -> 1
Returns the type library minor version.
tlib = WIN32OLE_TYPELIB.new('Microsoft Excel 9.0 Object Library') puts tlib.minor_version # -> 3
Builds a regular expression in @encoding. All chunks will be transcoded to that encoding.
Creates a single-column matrix where the values of that column are as given in column.
Matrix.column_vector([4,5,6])
=> 4
5
6
Returns an array of the column vectors of the matrix. See Vector.