possible opt elements:
hash form: :partial_input => true # source buffer may be part of larger source :after_output => true # stop conversion after output before input integer form: Encoding::Converter::PARTIAL_INPUT Encoding::Converter::AFTER_OUTPUT
possible results:
:invalid_byte_sequence :incomplete_input :undefined_conversion :after_output :destination_buffer_full :source_buffer_empty :finished
primitive_convert converts source_buffer into destination_buffer.
source_buffer should be a string or nil. nil means an empty string.
destination_buffer should be a string.
destination_byteoffset should be an integer or nil. nil means the end of destination_buffer. If it is omitted, nil is assumed.
destination_bytesize should be an integer or nil. nil means unlimited. If it is omitted, nil is assumed.
opt should be nil, a hash or an integer. nil means no flags. If it is omitted, nil is assumed.
primitive_convert converts the content of source_buffer from beginning and store the result into destination_buffer.
destination_byteoffset and destination_bytesize specify the region which the converted result is stored. destination_byteoffset specifies the start position in destination_buffer in bytes. If destination_byteoffset is nil, destination_buffer.bytesize is used for appending the result. destination_bytesize specifies maximum number of bytes. If destination_bytesize is nil, destination size is unlimited. After conversion, destination_buffer is resized to destination_byteoffset + actually produced number of bytes. Also destination_buffer’s encoding is set to destination_encoding.
primitive_convert drops the converted part of source_buffer. the dropped part is converted in destination_buffer or buffered in Encoding::Converter object.
primitive_convert stops conversion when one of following condition met.
invalid byte sequence found in source buffer (:invalid_byte_sequence) primitive_errinfo and last_error methods returns the detail of the error.
unexpected end of source buffer (:incomplete_input) this occur only when :partial_input is not specified. primitive_errinfo and last_error methods returns the detail of the error.
character not representable in output encoding (:undefined_conversion) primitive_errinfo and last_error methods returns the detail of the error.
after some output is generated, before input is done (:after_output) this occur only when :after_output is specified.
destination buffer is full (:destination_buffer_full) this occur only when destination_bytesize is non-nil.
source buffer is empty (:source_buffer_empty) this occur only when :partial_input is specified.
conversion is finished (:finished)
example:
ec = Encoding::Converter.new("UTF-8", "UTF-16BE") ret = ec.primitive_convert(src="pi", dst="", nil, 100) p [ret, src, dst] #=> [:finished, "", "\x00p\x00i"] ec = Encoding::Converter.new("UTF-8", "UTF-16BE") ret = ec.primitive_convert(src="pi", dst="", nil, 1) p [ret, src, dst] #=> [:destination_buffer_full, "i", "\x00"] ret = ec.primitive_convert(src, dst="", nil, 1) p [ret, src, dst] #=> [:destination_buffer_full, "", "p"] ret = ec.primitive_convert(src, dst="", nil, 1) p [ret, src, dst] #=> [:destination_buffer_full, "", "\x00"] ret = ec.primitive_convert(src, dst="", nil, 1) p [ret, src, dst] #=> [:finished, "", "i"]
primitive_errinfo returns important information regarding the last error as a 5-element array:
[result, enc1, enc2, error_bytes, readagain_bytes]
result is the last result of primitive_convert.
Other elements are only meaningful when result is :invalid_byte_sequence, :incomplete_input or :undefined_conversion.
enc1 and enc2 indicate a conversion step as a pair of strings. For example, a converter from EUC-JP to ISO-8859-1 converts a string as follows: EUC-JP -> UTF-8 -> ISO-8859-1. So [enc1, enc2] is either [“EUC-JP”, “UTF-8”] or [“UTF-8”, “ISO-8859-1”].
error_bytes and readagain_bytes indicate the byte sequences which caused the error. error_bytes is discarded portion. readagain_bytes is buffered portion which is read again on next conversion.
Example:
# \xff is invalid as EUC-JP. ec = Encoding::Converter.new("EUC-JP", "Shift_JIS") ec.primitive_convert(src="\xff", dst="", nil, 10) p ec.primitive_errinfo #=> [:invalid_byte_sequence, "EUC-JP", "Shift_JIS", "\xFF", ""] # HIRAGANA LETTER A (\xa4\xa2 in EUC-JP) is not representable in ISO-8859-1. # Since this error is occur in UTF-8 to ISO-8859-1 conversion, # error_bytes is HIRAGANA LETTER A in UTF-8 (\xE3\x81\x82). ec = Encoding::Converter.new("EUC-JP", "ISO-8859-1") ec.primitive_convert(src="\xa4\xa2", dst="", nil, 10) p ec.primitive_errinfo #=> [:undefined_conversion, "UTF-8", "ISO-8859-1", "\xE3\x81\x82", ""] # partial character is invalid ec = Encoding::Converter.new("EUC-JP", "ISO-8859-1") ec.primitive_convert(src="\xa4", dst="", nil, 10) p ec.primitive_errinfo #=> [:incomplete_input, "EUC-JP", "UTF-8", "\xA4", ""] # Encoding::Converter::PARTIAL_INPUT prevents invalid errors by # partial characters. ec = Encoding::Converter.new("EUC-JP", "ISO-8859-1") ec.primitive_convert(src="\xa4", dst="", nil, 10, Encoding::Converter::PARTIAL_INPUT) p ec.primitive_errinfo #=> [:source_buffer_empty, nil, nil, nil, nil] # \xd8\x00\x00@ is invalid as UTF-16BE because # no low surrogate after high surrogate (\xd8\x00). # It is detected by 3rd byte (\00) which is part of next character. # So the high surrogate (\xd8\x00) is discarded and # the 3rd byte is read again later. # Since the byte is buffered in ec, it is dropped from src. ec = Encoding::Converter.new("UTF-16BE", "UTF-8") ec.primitive_convert(src="\xd8\x00\x00@", dst="", nil, 10) p ec.primitive_errinfo #=> [:invalid_byte_sequence, "UTF-16BE", "UTF-8", "\xD8\x00", "\x00"] p src #=> "@" # Similar to UTF-16BE, \x00\xd8@\x00 is invalid as UTF-16LE. # The problem is detected by 4th byte. ec = Encoding::Converter.new("UTF-16LE", "UTF-8") ec.primitive_convert(src="\x00\xd8@\x00", dst="", nil, 10) p ec.primitive_errinfo #=> [:invalid_byte_sequence, "UTF-16LE", "UTF-8", "\x00\xD8", "@\x00"] p src #=> ""
Returns an exception object for the last conversion. Returns nil if the last conversion did not produce an error.
“error” means that Encoding::InvalidByteSequenceError and Encoding::UndefinedConversionError for Encoding::Converter#convert and :invalid_byte_sequence, :incomplete_input and :undefined_conversion for Encoding::Converter#primitive_convert.
ec = Encoding::Converter.new("utf-8", "iso-8859-1") p ec.primitive_convert(src="\xf1abcd", dst="") #=> :invalid_byte_sequence p ec.last_error #=> #<Encoding::InvalidByteSequenceError: "\xF1" followed by "a" on UTF-8> p ec.primitive_convert(src, dst, nil, 1) #=> :destination_buffer_full p ec.last_error #=> nil
Returns the block length of the digest.
This method is overridden by each implementation subclass.
Reads at most maxlen bytes in the non-blocking manner.
When no data can be read without blocking it raises OpenSSL::SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.
IO::WaitReadable means SSL needs to read internally so read_nonblock should be called again when the underlying IO is readable.
IO::WaitWritable means SSL needs to write internally so read_nonblock should be called again after the underlying IO is writable.
OpenSSL::Buffering#read_nonblock needs two rescue clause as follows:
# emulates blocking read (readpartial). begin result = ssl.read_nonblock(maxlen) rescue IO::WaitReadable IO.select([io]) retry rescue IO::WaitWritable IO.select(nil, [io]) retry end
Note that one reason that read_nonblock writes to the underlying IO is when the peer requests a new TLS/SSL handshake. See openssl the FAQ for more details. www.openssl.org/support/faq.html
By specifying a keyword argument exception to false, you can indicate that read_nonblock should not raise an IO::Wait*able exception, but return the symbol :wait_writable or :wait_readable instead. At EOF, it will return nil instead of raising EOFError.
Writes s in the non-blocking manner.
If there is buffered data, it is flushed first. This may block.
write_nonblock returns number of bytes written to the SSL connection.
When no data can be written without blocking it raises OpenSSL::SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.
IO::WaitReadable means SSL needs to read internally so write_nonblock should be called again after the underlying IO is readable.
IO::WaitWritable means SSL needs to write internally so write_nonblock should be called again after underlying IO is writable.
So OpenSSL::Buffering#write_nonblock needs two rescue clause as follows.
# emulates blocking write. begin result = ssl.write_nonblock(str) rescue IO::WaitReadable IO.select([io]) retry rescue IO::WaitWritable IO.select(nil, [io]) retry end
Note that one reason that write_nonblock reads from the underlying IO is when the peer requests a new TLS/SSL handshake. See the openssl FAQ for more details. www.openssl.org/support/faq.html
By specifying a keyword argument exception to false, you can indicate that write_nonblock should not raise an IO::Wait*able exception, but return the symbol :wait_writable or :wait_readable instead.
Generate a sequence of checkbox elements, as a String.
The checkboxes will all have the same name attribute. Each checkbox is followed by a label. There will be one checkbox for each value. Each value can be specified as a String, which will be used both as the value of the VALUE attribute and as the label for that checkbox. A single-element array has the same effect.
Each value can also be specified as a three-element array. The first element is the VALUE attribute; the second is the label; and the third is a boolean specifying whether this checkbox is CHECKED.
Each value can also be specified as a two-element array, by omitting either the value element (defaults to the same as the label), or the boolean checked element (defaults to false).
checkbox_group("name", "foo", "bar", "baz") # <INPUT TYPE="checkbox" NAME="name" VALUE="foo">foo # <INPUT TYPE="checkbox" NAME="name" VALUE="bar">bar # <INPUT TYPE="checkbox" NAME="name" VALUE="baz">baz checkbox_group("name", ["foo"], ["bar", true], "baz") # <INPUT TYPE="checkbox" NAME="name" VALUE="foo">foo # <INPUT TYPE="checkbox" CHECKED NAME="name" VALUE="bar">bar # <INPUT TYPE="checkbox" NAME="name" VALUE="baz">baz checkbox_group("name", ["1", "Foo"], ["2", "Bar", true], "Baz") # <INPUT TYPE="checkbox" NAME="name" VALUE="1">Foo # <INPUT TYPE="checkbox" CHECKED NAME="name" VALUE="2">Bar # <INPUT TYPE="checkbox" NAME="name" VALUE="Baz">Baz checkbox_group("NAME" => "name", "VALUES" => ["foo", "bar", "baz"]) checkbox_group("NAME" => "name", "VALUES" => [["foo"], ["bar", true], "baz"]) checkbox_group("NAME" => "name", "VALUES" => [["1", "Foo"], ["2", "Bar", true], "Baz"])
Generate a sequence of radio button Input elements, as a String.
This works the same as checkbox_group(). However, it is not valid to have more than one radiobutton in a group checked.
radio_group("name", "foo", "bar", "baz") # <INPUT TYPE="radio" NAME="name" VALUE="foo">foo # <INPUT TYPE="radio" NAME="name" VALUE="bar">bar # <INPUT TYPE="radio" NAME="name" VALUE="baz">baz radio_group("name", ["foo"], ["bar", true], "baz") # <INPUT TYPE="radio" NAME="name" VALUE="foo">foo # <INPUT TYPE="radio" CHECKED NAME="name" VALUE="bar">bar # <INPUT TYPE="radio" NAME="name" VALUE="baz">baz radio_group("name", ["1", "Foo"], ["2", "Bar", true], "Baz") # <INPUT TYPE="radio" NAME="name" VALUE="1">Foo # <INPUT TYPE="radio" CHECKED NAME="name" VALUE="2">Bar # <INPUT TYPE="radio" NAME="name" VALUE="Baz">Baz radio_group("NAME" => "name", "VALUES" => ["foo", "bar", "baz"]) radio_group("NAME" => "name", "VALUES" => [["foo"], ["bar", true], "baz"]) radio_group("NAME" => "name", "VALUES" => [["1", "Foo"], ["2", "Bar", true], "Baz"])
A convenience method which is same as follows:
group(1, '#<' + obj.class.name, '>') { ... }
Simple deprecation method that deprecates name by wrapping it up in a dummy method. It warns on each call to the dummy method telling the user of repl (unless repl is :none) and the Rubygems version that it is planned to go away.
Simple deprecation method that deprecates name by wrapping it up in a dummy method. It warns on each call to the dummy method telling the user of repl (unless repl is :none) and the Rubygems version that it is planned to go away.
Displays an error statement to the error output location. Asks a question if given.
Tokenize string returning the Ruby object
Returns true if stat is a directory, false otherwise.
File.stat("testfile").directory? #=> false File.stat(".").directory? #=> true
Returns the binary operator used to modify the receiver. This method is deprecated in favor of binary_operator.
Returns the binary operator used to modify the receiver. This method is deprecated in favor of binary_operator.
Returns the binary operator used to modify the receiver. This method is deprecated in favor of binary_operator.
Returns the binary operator used to modify the receiver. This method is deprecated in favor of binary_operator.
Returns the binary operator used to modify the receiver. This method is deprecated in favor of binary_operator.