Results for: "pstore"

Waits until IO is readable and returns a truthy value, or a falsy value when times out. Returns a truthy value immediately when buffered data is available.

You must require ‘io/wait’ to use this method.

Waits until IO is priority and returns a truthy value or a falsy value when times out. Priority data is sent and received using the Socket::MSG_OOB flag and is typically limited to streams.

You must require ‘io/wait’ to use this method.

Synonym for IO.new.

Returns self.

Closes the stream for reading if open for reading; returns nil. See Open and Closed Streams.

If the stream was opened by IO.popen and is also closed for writing, sets global variable $? (child exit status).

Example:

IO.popen('ruby', 'r+') do |pipe|
  puts pipe.closed?
  pipe.close_write
  puts pipe.closed?
  pipe.close_read
  puts $?
  puts pipe.closed?
end

Output:

false
false
pid 14748 exit 0
true

Related: IO#close, IO#close_write, IO#closed?.

Returns the path associated with the IO, or nil if there is no path associated with the IO. It is not guaranteed that the path exists on the filesystem.

$stdin.path # => "<STDIN>"

File.open("testfile") {|f| f.path} # => "testfile"

Reads at most maxlen bytes from ios using the read(2) system call after O_NONBLOCK is set for the underlying file descriptor.

If the optional outbuf argument is present, it must reference a String, which will receive the data. The outbuf will contain only the received data after the method call even if it is not empty at the beginning.

read_nonblock just calls the read(2) system call. It causes all errors the read(2) system call causes: Errno::EWOULDBLOCK, Errno::EINTR, etc. The caller should care such errors.

If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying read_nonblock.

read_nonblock causes EOFError on EOF.

On some platforms, such as Windows, non-blocking mode is not supported on IO objects other than sockets. In such cases, Errno::EBADF will be raised.

If the read byte buffer is not empty, read_nonblock reads from the buffer like readpartial. In this case, the read(2) system call is not called.

When read_nonblock raises an exception kind of IO::WaitReadable, read_nonblock should not be called until io is readable for avoiding busy loop. This can be done as follows.

# emulates blocking read (readpartial).
begin
  result = io.read_nonblock(maxlen)
rescue IO::WaitReadable
  IO.select([io])
  retry
end

Although IO#read_nonblock doesn’t raise IO::WaitWritable. OpenSSL::Buffering#read_nonblock can raise IO::WaitWritable. If IO and SSL should be used polymorphically, IO::WaitWritable should be rescued too. See the document of OpenSSL::Buffering#read_nonblock for sample code.

Note that this method is identical to readpartial except the non-blocking flag is set.

By specifying a keyword argument exception to false, you can indicate that read_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead. At EOF, it will return nil instead of raising EOFError.

See as_json.

Returns a JSON string representing self:

require 'json/add/bigdecimal'
puts BigDecimal(2).to_json
puts BigDecimal(2.0, 4).to_json
puts BigDecimal(Complex(2, 0)).to_json

Output:

{"json_class":"BigDecimal","b":"27:0.2e1"}
{"json_class":"BigDecimal","b":"36:0.2e1"}
{"json_class":"BigDecimal","b":"27:0.2e1"}

See as_json.

Returns a JSON string representing self:

require 'json/add/ostruct'
puts OpenStruct.new('name' => 'Rowdy', :age => nil).to_json

Output:

{"json_class":"OpenStruct","t":{'name':'Rowdy',"age":null}}

See as_json.

Returns a JSON string representing self:

require 'json/add/range'
puts (1..4).to_json
puts (1...4).to_json
puts ('a'..'d').to_json

Output:

{"json_class":"Range","a":[1,4,false]}
{"json_class":"Range","a":[1,4,true]}
{"json_class":"Range","a":["a","d",false]}

With a block given, passes each element of self to the block in reverse order:

a = []
(1..4).reverse_each {|element| a.push(element) } # => 1..4
a # => [4, 3, 2, 1]

a = []
(1...4).reverse_each {|element| a.push(element) } # => 1...4
a # => [3, 2, 1]

With no block given, returns an enumerator.

See as_json.

Returns a JSON string representing self:

require 'json/add/rational'
puts Rational(2, 3).to_json

Output:

{"json_class":"Rational","n":2,"d":3}

See as_json.

Returns a JSON string representing self:

require 'json/add/regexp'
puts /foo/.to_json

Output:

{"json_class":"Regexp","o":0,"s":"foo"}

With no argument, returns the value of $~, which is the result of the most recent pattern match (see Regexp global variables):

/c(.)t/ =~ 'cat'  # => 0
Regexp.last_match # => #<MatchData "cat" 1:"a">
/a/ =~ 'foo'      # => nil
Regexp.last_match # => nil

With non-negative integer argument n, returns the _n_th field in the matchdata, if any, or nil if none:

/c(.)t/ =~ 'cat'     # => 0
Regexp.last_match(0) # => "cat"
Regexp.last_match(1) # => "a"
Regexp.last_match(2) # => nil

With negative integer argument n, counts backwards from the last field:

Regexp.last_match(-1)       # => "a"

With string or symbol argument name, returns the string value for the named capture, if any:

/(?<lhs>\w+)\s*=\s*(?<rhs>\w+)/ =~ 'var = val'
Regexp.last_match        # => #<MatchData "var = val" lhs:"var"rhs:"val">
Regexp.last_match(:lhs)  # => "var"
Regexp.last_match('rhs') # => "val"
Regexp.last_match('foo') # Raises IndexError.

Returns a hash representing named captures of self (see Named Captures):

• Each key is the name of a named capture.

• Each value is an array of integer indexes for that named capture.

Examples:

/(?<foo>.)(?<bar>.)/.named_captures # => {"foo"=>[1], "bar"=>[2]}
/(?<foo>.)(?<foo>.)/.named_captures # => {"foo"=>[1, 2]}
/(.)(.)/.named_captures             # => {}

See as_json.

Returns a JSON string representing self:

require 'json/add/set'
puts Set.new(%w/foo bar baz/).to_json

Output:

{"json_class":"Set","a":["foo","bar","baz"]}

Returns self if no arguments are given. Otherwise, converts the set to another with klass.new(self, *args, &block).

In subclasses, returns klass.new(self, *args, &block) unless overridden.

See as_json.

Returns a JSON string representing self:

require 'json/add/struct'
Customer = Struct.new('Customer', :name, :address, :zip)
puts Struct::Customer.new.to_json

Output:

{"json_class":"Struct","t":{'name':'Rowdy',"age":null}}