Accepts an incoming connection using accept(2) after O_NONBLOCK is set for the underlying file descriptor. It returns an array containing the accepted socket for the incoming connection, client_socket, and an Addrinfo, client_addrinfo.
# In one script, start this first require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.bind(sockaddr) socket.listen(5) begin # emulate blocking accept client_socket, client_addrinfo = socket.accept_nonblock rescue IO::WaitReadable, Errno::EINTR IO.select([socket]) retry end puts "The client said, '#{client_socket.readline.chomp}'" client_socket.puts "Hello from script one!" socket.close # In another script, start this second require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.connect(sockaddr) socket.puts "Hello from script 2." puts "The server said, '#{socket.readline.chomp}'" socket.close
Refer to Socket#accept for the exceptions that may be thrown if the call to accept_nonblock fails.
Socket#accept_nonblock may raise any error corresponding to accept(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK, Errno::EAGAIN, Errno::ECONNABORTED or Errno::EPROTO, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying accept_nonblock.
By specifying a keyword argument exception to false, you can indicate that accept_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
yield socket and client address for each a connection accepted via given sockets.
The arguments are a list of sockets. The individual argument should be a socket or an array of sockets.
This method yields the block sequentially. It means that the next connection is not accepted until the block returns. So concurrent mechanism, thread for example, should be used to service multiple clients at a time.
Requests a connection to be made on the given remote_sockaddr after O_NONBLOCK is set for the underlying file descriptor. Returns 0 if successful, otherwise an exception is raised.
# +remote_sockaddr+ - the +struct+ sockaddr contained in a string or Addrinfo object
# Pull down Google's web page require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(80, 'www.google.com') begin # emulate blocking connect socket.connect_nonblock(sockaddr) rescue IO::WaitWritable IO.select(nil, [socket]) # wait 3-way handshake completion begin socket.connect_nonblock(sockaddr) # check connection failure rescue Errno::EISCONN end end socket.write("GET / HTTP/1.0\r\n\r\n") results = socket.read
Refer to Socket#connect for the exceptions that may be thrown if the call to connect_nonblock fails.
Socket#connect_nonblock may raise any error corresponding to connect(2) failure, including Errno::EINPROGRESS.
If the exception is Errno::EINPROGRESS, it is extended by IO::WaitWritable. So IO::WaitWritable can be used to rescue the exceptions for retrying connect_nonblock.
By specifying a keyword argument exception to false, you can indicate that connect_nonblock should not raise an IO::WaitWritable exception, but return the symbol :wait_writable instead.
# Socket#connect
Disallows further read using shutdown system call.
s1, s2 = UNIXSocket.pair s1.close_read s2.puts #=> Broken pipe (Errno::EPIPE)
Disallows further write using shutdown system call.
UNIXSocket.pair {|s1, s2| s1.print "ping" s1.close_write p s2.read #=> "ping" s2.print "pong" s2.close p s1.read #=> "pong" }
Returns an Addrinfo object for local address obtained by getsockname.
Note that addrinfo.protocol is filled by 0.
TCPSocket.open("www.ruby-lang.org", 80) {|s| p s.local_address #=> #<Addrinfo: 192.168.0.129:36873 TCP> } TCPServer.open("127.0.0.1", 1512) {|serv| p serv.local_address #=> #<Addrinfo: 127.0.0.1:1512 TCP> }
sendmsg_nonblock sends a message using sendmsg(2) system call in non-blocking manner.
It is similar to BasicSocket#sendmsg but the non-blocking flag is set before the system call and it doesn’t retry the system call.
By specifying a keyword argument exception to false, you can indicate that sendmsg_nonblock should not raise an IO::WaitWritable exception, but return the symbol :wait_writable instead.
Receives up to maxlen bytes from socket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The result, mesg, is the data received.
When recvfrom(2) returns 0, Socket#recv_nonblock returns nil. In most cases it means the connection was closed, but for UDP connections it may mean an empty packet was received, as the underlying API makes it impossible to distinguish these two cases.
maxlen - the number of bytes to receive from the socket
flags - zero or more of the MSG_ options
buf - destination String buffer
options - keyword hash, supporting ‘exception: false`
serv = TCPServer.new("127.0.0.1", 0) af, port, host, addr = serv.addr c = TCPSocket.new(addr, port) s = serv.accept c.send "aaa", 0 begin # emulate blocking recv. p s.recv_nonblock(10) #=> "aaa" rescue IO::WaitReadable IO.select([s]) retry end
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recv_nonblock fails.
BasicSocket#recv_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recv_nonblock.
By specifying a keyword argument exception to false, you can indicate that recv_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
recvmsg receives a message using recvmsg(2) system call in non-blocking manner.
It is similar to BasicSocket#recvmsg but non-blocking flag is set before the system call and it doesn’t retry the system call.
By specifying a keyword argument exception to false, you can indicate that recvmsg_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
creates a new Socket connected to the address of local_addrinfo.
If local_addrinfo is nil, the address of the socket is not bound.
The timeout specify the seconds for timeout. Errno::ETIMEDOUT is raised when timeout occur.
If a block is given the created socket is yielded for each address.
Returns true for IPv4 loopback address (127.0.0.0/8). It returns false otherwise.
Returns true for IPv6 loopback address (::1). It returns false otherwise.
Returns true for IPv6 link local address (fe80::/10). It returns false otherwise.
Returns true for IPv6 site local address (fec0::/10). It returns false otherwise.
Receives up to maxlen bytes from udpsocket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The first element of the results, mesg, is the data received. The second element, sender_inet_addr, is an array to represent the sender address.
When recvfrom(2) returns 0, Socket#recv_nonblock returns nil. In most cases it means the connection was closed, but it may also mean an empty packet was received, as the underlying API makes it impossible to distinguish these two cases.
maxlen - the number of bytes to receive from the socket
flags - zero or more of the MSG_ options
outbuf - destination String buffer
options - keyword hash, supporting ‘exception: false`
require 'socket' s1 = UDPSocket.new s1.bind("127.0.0.1", 0) s2 = UDPSocket.new s2.bind("127.0.0.1", 0) s2.connect(*s1.addr.values_at(3,1)) s1.connect(*s2.addr.values_at(3,1)) s1.send "aaa", 0 begin # emulate blocking recvfrom p s2.recvfrom_nonblock(10) #=> ["aaa", ["AF_INET", 33302, "localhost.localdomain", "127.0.0.1"]] rescue IO::WaitReadable IO.select([s2]) retry end
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recvfrom_nonblock fails.
UDPSocket#recvfrom_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recvfrom_nonblock.
By specifying a keyword argument exception to false, you can indicate that recvfrom_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Accepts an incoming connection using accept(2) after O_NONBLOCK is set for the underlying file descriptor. It returns an accepted TCPSocket for the incoming connection.
require 'socket' serv = TCPServer.new(2202) begin # emulate blocking accept sock = serv.accept_nonblock rescue IO::WaitReadable, Errno::EINTR IO.select([serv]) retry end # sock is an accepted socket.
Refer to Socket#accept for the exceptions that may be thrown if the call to TCPServer#accept_nonblock fails.
TCPServer#accept_nonblock may raise any error corresponding to accept(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK, Errno::EAGAIN, Errno::ECONNABORTED, Errno::EPROTO, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying accept_nonblock.
By specifying a keyword argument exception to false, you can indicate that accept_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Accepts an incoming connection using accept(2) after O_NONBLOCK is set for the underlying file descriptor. It returns an accepted UNIXSocket for the incoming connection.
require 'socket' serv = UNIXServer.new("/tmp/sock") begin # emulate blocking accept sock = serv.accept_nonblock rescue IO::WaitReadable, Errno::EINTR IO.select([serv]) retry end # sock is an accepted socket.
Refer to Socket#accept for the exceptions that may be thrown if the call to UNIXServer#accept_nonblock fails.
UNIXServer#accept_nonblock may raise any error corresponding to accept(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK, Errno::EAGAIN, Errno::ECONNABORTED or Errno::EPROTO, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying accept_nonblock.
By specifying a keyword argument exception to false, you can indicate that accept_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Closes self for reading; closed-write setting remains unchanged.
Raises IOError if reading is attempted.
Related: StringIO#close, StringIO#close_write.
Closes self for writing; closed-read setting remains unchanged.
Raises IOError if writing is attempted.
Related: StringIO#close, StringIO#close_read.
Returns true if self is closed for reading, false otherwise.
Returns true if self is closed for writing, false otherwise.
Returns the Encoding object that represents the encoding of the file. If the stream is write mode and no encoding is specified, returns nil.
Returns the Encoding of the internal string if conversion is specified. Otherwise returns nil.