Verifies entry in a .gem file.
Verifies the files of the gem
Resolve the requested dependencies against the gems available via Gem.path and return an Array of Specification objects to be activated.
Yields each source in the list.
Return the list of all array-oriented instance variables.
Return the list of all instance variables.
Is name a required attribute?
Required specification attributes
Sanitize a single string.
Returns the full path to this spec’s ri directory.
True if this gem has the same attributes as other.
Returns an array of CodeLine objects from the source string
Invoked by IO#write or IO::Buffer#write to write length bytes to io from from a specified buffer (see IO::Buffer) at the given offset.
The length argument is the “minimum length to be written”. If the IO buffer size is 8KiB, but the length specified is 1024 (1KiB), at most 8KiB will be written, but at least 1KiB will be. Generally, the only case where less data than length will be written is if there is an error writing the data.
Specifying a length of 0 is valid and means try writing at least once, as much data as possible.
Suggested implementation should try to write to io in a non-blocking manner and call io_wait if the io is not ready (which will yield control to other fibers).
See IO::Buffer for an interface available to get data from buffer efficiently.
Expected to return number of bytes written, or, in case of an error, -errno (negated number corresponding to system’s error code).
The method should be considered experimental.
Invoked by IO#pwrite or IO::Buffer#pwrite to write length bytes to io at offset from into a specified buffer (see IO::Buffer) at the given offset.
This method is semantically the same as io_write, but it allows to specify the offset to write to and is often better for asynchronous IO on the same file.
The method should be considered experimental.
Returns the source encoding as an encoding object.
Note that the result may not be equal to the source encoding of the encoding converter if the conversion has multiple steps.
ec = Encoding::Converter.new("ISO-8859-1", "EUC-JP") # ISO-8859-1 -> UTF-8 -> EUC-JP begin ec.convert("\xa0") # NO-BREAK SPACE, which is available in UTF-8 but not in EUC-JP. rescue Encoding::UndefinedConversionError p $!.source_encoding #=> #<Encoding:UTF-8> p $!.destination_encoding #=> #<Encoding:EUC-JP> p $!.source_encoding_name #=> "UTF-8" p $!.destination_encoding_name #=> "EUC-JP" end
Returns the source encoding as an encoding object.
Note that the result may not be equal to the source encoding of the encoding converter if the conversion has multiple steps.
ec = Encoding::Converter.new("ISO-8859-1", "EUC-JP") # ISO-8859-1 -> UTF-8 -> EUC-JP begin ec.convert("\xa0") # NO-BREAK SPACE, which is available in UTF-8 but not in EUC-JP. rescue Encoding::UndefinedConversionError p $!.source_encoding #=> #<Encoding:UTF-8> p $!.destination_encoding #=> #<Encoding:EUC-JP> p $!.source_encoding_name #=> "UTF-8" p $!.destination_encoding_name #=> "EUC-JP" end
Returns the source encoding as an Encoding object.
possible opt elements:
hash form: :partial_input => true # source buffer may be part of larger source :after_output => true # stop conversion after output before input integer form: Encoding::Converter::PARTIAL_INPUT Encoding::Converter::AFTER_OUTPUT
possible results:
:invalid_byte_sequence :incomplete_input :undefined_conversion :after_output :destination_buffer_full :source_buffer_empty :finished
primitive_convert converts source_buffer into destination_buffer.
source_buffer should be a string or nil. nil means an empty string.
destination_buffer should be a string.
destination_byteoffset should be an integer or nil. nil means the end of destination_buffer. If it is omitted, nil is assumed.
destination_bytesize should be an integer or nil. nil means unlimited. If it is omitted, nil is assumed.
opt should be nil, a hash or an integer. nil means no flags. If it is omitted, nil is assumed.
primitive_convert converts the content of source_buffer from beginning and store the result into destination_buffer.
destination_byteoffset and destination_bytesize specify the region which the converted result is stored. destination_byteoffset specifies the start position in destination_buffer in bytes. If destination_byteoffset is nil, destination_buffer.bytesize is used for appending the result. destination_bytesize specifies maximum number of bytes. If destination_bytesize is nil, destination size is unlimited. After conversion, destination_buffer is resized to destination_byteoffset + actually produced number of bytes. Also destination_buffer’s encoding is set to destination_encoding.
primitive_convert drops the converted part of source_buffer. the dropped part is converted in destination_buffer or buffered in Encoding::Converter object.
primitive_convert stops conversion when one of following condition met.
invalid byte sequence found in source buffer (:invalid_byte_sequence) primitive_errinfo and last_error methods returns the detail of the error.
unexpected end of source buffer (:incomplete_input) this occur only when :partial_input is not specified. primitive_errinfo and last_error methods returns the detail of the error.
character not representable in output encoding (:undefined_conversion) primitive_errinfo and last_error methods returns the detail of the error.
after some output is generated, before input is done (:after_output) this occur only when :after_output is specified.
destination buffer is full (:destination_buffer_full) this occur only when destination_bytesize is non-nil.
source buffer is empty (:source_buffer_empty) this occur only when :partial_input is specified.
conversion is finished (:finished)
example:
ec = Encoding::Converter.new("UTF-8", "UTF-16BE") ret = ec.primitive_convert(src="pi", dst="", nil, 100) p [ret, src, dst] #=> [:finished, "", "\x00p\x00i"] ec = Encoding::Converter.new("UTF-8", "UTF-16BE") ret = ec.primitive_convert(src="pi", dst="", nil, 1) p [ret, src, dst] #=> [:destination_buffer_full, "i", "\x00"] ret = ec.primitive_convert(src, dst="", nil, 1) p [ret, src, dst] #=> [:destination_buffer_full, "", "p"] ret = ec.primitive_convert(src, dst="", nil, 1) p [ret, src, dst] #=> [:destination_buffer_full, "", "\x00"] ret = ec.primitive_convert(src, dst="", nil, 1) p [ret, src, dst] #=> [:finished, "", "i"]
Parses a C prototype signature
If Hash tymap is provided, the return value and the arguments from the signature are expected to be keys, and the value will be the C type to be looked up.
Example:
require 'fiddle/import' include Fiddle::CParser #=> Object parse_signature('double sum(double, double)') #=> ["sum", Fiddle::TYPE_DOUBLE, [Fiddle::TYPE_DOUBLE, Fiddle::TYPE_DOUBLE]] parse_signature('void update(void (*cb)(int code))') #=> ["update", Fiddle::TYPE_VOID, [Fiddle::TYPE_VOIDP]] parse_signature('char (*getbuffer(void))[80]') #=> ["getbuffer", Fiddle::TYPE_VOIDP, []]
Writes s to the buffer. When the buffer is full or sync is true the buffer is flushed to the underlying socket.
Writes s in the non-blocking manner.
If there is buffered data, it is flushed first. This may block.
write_nonblock returns number of bytes written to the SSL connection.
When no data can be written without blocking it raises OpenSSL::SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.
IO::WaitReadable means SSL needs to read internally so write_nonblock should be called again after the underlying IO is readable.
IO::WaitWritable means SSL needs to write internally so write_nonblock should be called again after underlying IO is writable.
So OpenSSL::Buffering#write_nonblock needs two rescue clause as follows.
# emulates blocking write. begin result = ssl.write_nonblock(str) rescue IO::WaitReadable IO.select([io]) retry rescue IO::WaitWritable IO.select(nil, [io]) retry end
Note that one reason that write_nonblock reads from the underlying IO is when the peer requests a new TLS/SSL handshake. See the openssl FAQ for more details. www.openssl.org/support/faq.html
By specifying a keyword argument exception to false, you can indicate that write_nonblock should not raise an IO::Wait*able exception, but return the symbol :wait_writable or :wait_readable instead.