Tries to set console size. The effect depends on the platform and the running environment.
You must require ‘io/console’ to use this method.
Returns status information for ios as an object of type File::Stat.
f = File.new("testfile") s = f.stat "%o" % s.mode #=> "100644" s.blksize #=> 4096 s.atime #=> Wed Apr 09 08:53:54 CDT 2003
Returns an array of all lines read from the stream.
When called from class IO (but not subclasses of IO), this method has potential security vulnerabilities if called with untrusted input; see Command Injection.
The first argument must be a string that is the path to a file.
With only argument path given, parses lines from the file at the given path, as determined by the default line separator, and returns those lines in an array:
IO.readlines('t.txt') # => ["First line\n", "Second line\n", "\n", "Third line\n", "Fourth line\n"]
With argument sep given, parses lines as determined by that line separator (see Line Separator):
# Ordinary separator. IO.readlines('t.txt', 'li') # =>["First li", "ne\nSecond li", "ne\n\nThird li", "ne\nFourth li", "ne\n"] # Get-paragraphs separator. IO.readlines('t.txt', '') # => ["First line\nSecond line\n\n", "Third line\nFourth line\n"] # Get-all separator. IO.readlines('t.txt', nil) # => ["First line\nSecond line\n\nThird line\nFourth line\n"]
With argument limit given, parses lines as determined by the default line separator and the given line-length limit (see Line Limit):
IO.readlines('t.txt', 7) # => ["First l", "ine\n", "Second ", "line\n", "\n", "Third l", "ine\n", "Fourth ", "line\n"]
With arguments sep and limit given, parses lines as determined by the given line separator and the given line-length limit (see Line Separator and Line Limit):
Optional keyword arguments opts specify:
Encoding options.
Behaves like IO.read, except that the stream is opened in binary mode with ASCII-8BIT encoding.
When called from class IO (but not subclasses of IO), this method has potential security vulnerabilities if called with untrusted input; see Command Injection.
Opens the stream, writes the given data to it, and closes the stream; returns the number of bytes written.
When called from class IO (but not subclasses of IO), this method has potential security vulnerabilities if called with untrusted input; see Command Injection.
The first argument must be a string that is the path to a file.
With only argument path given, writes the given data to the file at that path:
IO.write('t.tmp', 'abc') # => 3 File.read('t.tmp') # => "abc"
If offset is zero (the default), the file is overwritten:
IO.write('t.tmp', 'A') # => 1 File.read('t.tmp') # => "A"
If offset in within the file content, the file is partly overwritten:
IO.write('t.tmp', 'abcdef') # => 3 File.read('t.tmp') # => "abcdef" # Offset within content. IO.write('t.tmp', '012', 2) # => 3 File.read('t.tmp') # => "ab012f"
If offset is outside the file content, the file is padded with null characters "\u0000":
IO.write('t.tmp', 'xyz', 10) # => 3 File.read('t.tmp') # => "ab012f\u0000\u0000\u0000\u0000xyz"
Optional keyword arguments opts specify:
Encoding options.
Writes the given object to self, which must be opened for writing (see Modes); returns the number bytes written. If object is not a string is converted via method to_s:
f = File.new('t.tmp', 'w') f.syswrite('foo') # => 3 f.syswrite(30) # => 2 f.syswrite(:foo) # => 3 f.close
This methods should not be used with other stream-writer methods.
Behaves like IO#write, except that it:
Writes at the given offset (in bytes).
Disregards, and does not modify, the stream’s position (see Position).
Bypasses any user space buffering in the stream.
Because this method does not disturb the stream’s state (its position, in particular), pwrite allows multiple threads and processes to use the same IO object for writing at various offsets.
f = File.open('t.tmp', 'w+') # Write 6 bytes at offset 3. f.pwrite('ABCDEF', 3) # => 6 f.rewind f.read # => "\u0000\u0000\u0000ABCDEF" f.close
Not available on some platforms.
Returns the current line number for the stream; see Line Number.
Sets and returns the line number for the stream; see Line Number.
Reads and returns all remaining line from the stream; does not modify $_. See Line IO.
With no arguments given, returns lines as determined by line separator $/, or nil if none:
f = File.new('t.txt') f.readlines # => ["First line\n", "Second line\n", "\n", "Fourth line\n", "Fifth line\n"] f.readlines # => [] f.close
With only string argument sep given, returns lines as determined by line separator sep, or nil if none; see Line Separator:
f = File.new('t.txt') f.readlines('li') # => ["First li", "ne\nSecond li", "ne\n\nFourth li", "ne\nFifth li", "ne\n"] f.close
The two special values for sep are honored:
f = File.new('t.txt') # Get all into one string. f.readlines(nil) # => ["First line\nSecond line\n\nFourth line\nFifth line\n"] # Get paragraphs (up to two line separators). f.rewind f.readlines('') # => ["First line\nSecond line\n\n", "Fourth line\nFifth line\n"] f.close
With only integer argument limit given, limits the number of bytes in each line; see Line Limit:
f = File.new('t.txt') f.readlines(8) # => ["First li", "ne\n", "Second l", "ine\n", "\n", "Fourth l", "ine\n", "Fifth li", "ne\n"] f.close
With arguments sep and limit given, combines the two behaviors:
Returns lines as determined by line separator sep.
But returns no more bytes in a line than are allowed by the limit.
Optional keyword argument chomp specifies whether line separators are to be omitted:
f = File.new('t.txt') f.readlines(chomp: true) # => ["First line", "Second line", "", "Fourth line", "Fifth line"] f.close
Writes each of the given objects to self, which must be opened for writing (see Access Modes); returns the total number bytes written; each of objects that is not a string is converted via method to_s:
$stdout.write('Hello', ', ', 'World!', "\n") # => 14 $stdout.write('foo', :bar, 2, "\n") # => 8
Output:
Hello, World! foobar2
Related: IO#read.
Pushes back (“unshifts”) the given data onto the stream’s buffer, placing the data so that it is next to be read; returns nil. See Byte IO.
Note that:
Calling the method has no effect with unbuffered reads (such as IO#sysread).
Calling rewind on the stream discards the pushed-back data.
When argument integer is given, uses only its low-order byte:
File.write('t.tmp', '012') f = File.open('t.tmp') f.ungetbyte(0x41) # => nil f.read # => "A012" f.rewind f.ungetbyte(0x4243) # => nil f.read # => "C012" f.close
When argument string is given, uses all bytes:
File.write('t.tmp', '012') f = File.open('t.tmp') f.ungetbyte('A') # => nil f.read # => "A012" f.rewind f.ungetbyte('BCDE') # => nil f.read # => "BCDE012" f.close
Pushes back (“unshifts”) the given data onto the stream’s buffer, placing the data so that it is next to be read; returns nil. See Character IO.
Note that:
Calling the method has no effect with unbuffered reads (such as IO#sysread).
Calling rewind on the stream discards the pushed-back data.
When argument integer is given, interprets the integer as a character:
File.write('t.tmp', '012') f = File.open('t.tmp') f.ungetc(0x41) # => nil f.read # => "A012" f.rewind f.ungetc(0x0442) # => nil f.getc.ord # => 1090 f.close
When argument string is given, uses all characters:
File.write('t.tmp', '012') f = File.open('t.tmp') f.ungetc('A') # => nil f.read # => "A012" f.rewind f.ungetc("\u0442\u0435\u0441\u0442") # => nil f.getc.ord # => 1090 f.getc.ord # => 1077 f.getc.ord # => 1089 f.getc.ord # => 1090 f.close
Repositions the stream to its beginning, setting both the position and the line number to zero; see Position and Line Number:
f = File.open('t.txt') f.tell # => 0 f.lineno # => 0 f.gets # => "First line\n" f.tell # => 12 f.lineno # => 1 f.rewind # => 0 f.tell # => 0 f.lineno # => 0 f.close
Note that this method cannot be used with streams such as pipes, ttys, and sockets.
Sets the stream’s data mode as binary (see Data Mode).
A stream’s data mode may not be changed from binary to text.
Returns true if the stream is on binary mode, false otherwise. See Data Mode.
Returns a string representation of self:
f = File.open('t.txt') f.inspect # => "#<File:t.txt>" f.close
Reads a line as with IO#gets, but raises EOFError if already at end-of-stream.
Optional keyword argument chomp specifies whether line separators are to be omitted.
Returns a string containing a detailed summary of the keys and values.
Iterates over the elements of self.
With a block given and no argument, calls the block each element of the range; returns self:
a = [] (1..5).step {|element| a.push(element) } # => 1..5 a # => [1, 2, 3, 4, 5] a = [] ('a'..'e').step {|element| a.push(element) } # => "a".."e" a # => ["a", "b", "c", "d", "e"]
With a block given and a positive integer argument n given, calls the block with element 0, element n, element 2n, and so on:
a = [] (1..5).step(2) {|element| a.push(element) } # => 1..5 a # => [1, 3, 5] a = [] ('a'..'e').step(2) {|element| a.push(element) } # => "a".."e" a # => ["a", "c", "e"]
With no block given, returns an enumerator, which will be of class Enumerator::ArithmeticSequence if self is numeric; otherwise of class Enumerator:
e = (1..5).step(2) # => ((1..5).step(2)) e.class # => Enumerator::ArithmeticSequence ('a'..'e').step # => #<Enumerator: ...>
Related: Range#%.
Returns the object that defines the beginning of self.
(1..4).begin # => 1 (..2).begin # => nil
Related: Range#first, Range#end.
With no argument, returns the first element of self, if it exists:
(1..4).first # => 1 ('a'..'d').first # => "a"
With non-negative integer argument n given, returns the first n elements in an array:
(1..10).first(3) # => [1, 2, 3] (1..10).first(0) # => [] (1..4).first(50) # => [1, 2, 3, 4]
Raises an exception if there is no first element:
(..4).first # Raises RangeError
With no argument, returns the last element of self, if it exists:
(1..4).last # => 4 ('a'..'d').last # => "d"
Note that last with no argument returns the end element of self even if exclude_end? is true:
(1...4).last # => 4 ('a'...'d').last # => "d"
With non-negative integer argument n given, returns the last n elements in an array:
(1..10).last(3) # => [8, 9, 10] (1..10).last(0) # => [] (1..4).last(50) # => [1, 2, 3, 4]
Note that last with argument does not return the end element of self if exclude_end? it true:
(1...4).last(3) # => [1, 2, 3] ('a'...'d').last(3) # => ["a", "b", "c"]
Raises an exception if there is no last element:
(1..).last # Raises RangeError
Returns the minimum value in self, using method <=> or a given block for comparison.
With no argument and no block given, returns the minimum-valued element of self.
(1..4).min # => 1 ('a'..'d').min # => "a" (-4..-1).min # => -4
With non-negative integer argument n given, and no block given, returns the n minimum-valued elements of self in an array:
(1..4).min(2) # => [1, 2] ('a'..'d').min(2) # => ["a", "b"] (-4..-1).min(2) # => [-4, -3] (1..4).min(50) # => [1, 2, 3, 4]
If a block is given, it is called:
First, with the first two element of self.
Then, sequentially, with the so-far minimum value and the next element of self.
To illustrate:
(1..4).min {|a, b| p [a, b]; a <=> b } # => 1
Output:
[2, 1] [3, 1] [4, 1]
With no argument and a block given, returns the return value of the last call to the block:
(1..4).min {|a, b| -(a <=> b) } # => 4
With non-negative integer argument n given, and a block given, returns the return values of the last n calls to the block in an array:
(1..4).min(2) {|a, b| -(a <=> b) } # => [4, 3] (1..4).min(50) {|a, b| -(a <=> b) } # => [4, 3, 2, 1]
Returns an empty array if n is zero:
(1..4).min(0) # => [] (1..4).min(0) {|a, b| -(a <=> b) } # => []
Returns nil or an empty array if:
The begin value of the range is larger than the end value:
(4..1).min # => nil (4..1).min(2) # => [] (4..1).min {|a, b| -(a <=> b) } # => nil (4..1).min(2) {|a, b| -(a <=> b) } # => []
The begin value of an exclusive range is equal to the end value:
(1...1).min # => nil (1...1).min(2) # => [] (1...1).min {|a, b| -(a <=> b) } # => nil (1...1).min(2) {|a, b| -(a <=> b) } # => []
Raises an exception if either:
self is a beginless range: (..4).
A block is given and self is an endless range.
Related: Range#max, Range#minmax.