Results for: "tally"

Sets current locale id (lcid).

WIN32OLE.locale = 1033 # set locale English(U.S)
obj = WIN32OLE_VARIANT.new("$100,000", WIN32OLE::VARIANT::VT_CY)

Equality — At the Object level, == returns true only if obj and other are the same object. Typically, this method is overridden in descendant classes to provide class-specific meaning.

Unlike ==, the equal? method should never be overridden by subclasses as it is used to determine object identity (that is, a.equal?(b) if and only if a is the same object as b):

obj = "a"
other = obj.dup

obj == other      #=> true
obj.equal? other  #=> false
obj.equal? obj    #=> true

The eql? method returns true if obj and other refer to the same hash key. This is used by Hash to test members for equality. For any pair of objects where eql? returns true, the hash value of both objects must be equal. So any subclass that overrides eql? should also override hash appropriately.

For objects of class Object, eql? is synonymous with ==. Subclasses normally continue this tradition by aliasing eql? to their overridden == method, but there are exceptions. Numeric types, for example, perform type conversion across ==, but not across eql?, so:

1 == 1.0     #=> true
1.eql? 1.0   #=> false

Returns a new Array containing all values in self:

h = {foo: 0, bar: 1, baz: 2}
h.values # => [0, 1, 2]

Returns true if value is a value in self, otherwise false.

Returns all environment variable values in an Array:

ENV.replace('foo' => '0', 'bar' => '1')
ENV.values # => ['1', '0']

The order of the values is OS-dependent. See About Ordering.

Returns the empty Array if ENV is empty.

Returns true if value is the value for some environment variable name, false otherwise:

ENV.replace('foo' => '0', 'bar' => '1')
ENV.value?('0') # => true
ENV.has_value?('0') # => true
ENV.value?('2') # => false
ENV.has_value?('2') # => false

Reads at most maxlen bytes from the ARGF stream.

If the optional outbuf argument is present, it must reference a String, which will receive the data. The outbuf will contain only the received data after the method call even if it is not empty at the beginning.

It raises EOFError on end of ARGF stream. Since ARGF stream is a concatenation of multiple files, internally EOF is occur for each file. ARGF.readpartial returns empty strings for EOFs except the last one and raises EOFError for the last one.

Returns the current offset (in bytes) of the current file in ARGF.

ARGF.pos    #=> 0
ARGF.gets   #=> "This is line one\n"
ARGF.pos    #=> 17

Creates or retrieves cached CSV objects. For arguments and options, see CSV.new.

This API is not Ractor-safe.

With no block given, returns a CSV object.

The first call to instance creates and caches a CSV object:

s0 = 's0'
csv0 = CSV.instance(s0)
csv0.class # => CSV

Subsequent calls to instance with that same string or io retrieve that same cached object:

csv1 = CSV.instance(s0)
csv1.class # => CSV
csv1.equal?(csv0) # => true # Same CSV object

A subsequent call to instance with a different string or io creates and caches a different CSV object.

s1 = 's1'
csv2 = CSV.instance(s1)
csv2.equal?(csv0) # => false # Different CSV object

All the cached objects remains available:

csv3 = CSV.instance(s0)
csv3.equal?(csv0) # true # Same CSV object
csv4 = CSV.instance(s1)
csv4.equal?(csv2) # true # Same CSV object

When a block is given, calls the block with the created or retrieved CSV object; returns the block’s return value:

CSV.instance(s0) {|csv| :foo } # => :foo

Calls CSV.read with source, options, and certain default options:

• headers: true

• converters: :numeric

• header_converters: :symbol

Returns a CSV::Table object.

Example:

string = "Name,Value\nfoo,0\nbar,1\nbaz,2\n"
path = 't.csv'
File.write(path, string)
CSV.table(path) # => #<CSV::Table mode:col_or_row row_count:4>

Evaluates the Ruby expression(s) in string, in the binding’s context. If the optional filename and lineno parameters are present, they will be used when reporting syntax errors.

def get_binding(param)
  binding
end
b = get_binding("hello")
b.eval("param")   #=> "hello"

Looks up the first IP address for name.

Looks up all IP address for name.

Looks up the first IP address for name.

Looks up all IP address for name.

Get a message from the ractor’s outgoing port, which was put there by Ractor.yield or at ractor’s termination.

r = Ractor.new do
  Ractor.yield 'explicit yield'
  'last value'
end
puts r.take #=> 'explicit yield'
puts r.take #=> 'last value'
puts r.take # Ractor::ClosedError (The outgoing-port is already closed)

The fact that the last value is also sent to the outgoing port means that take can be used as an analog of Thread#join (“just wait until ractor finishes”). However, it will raise if somebody has already consumed that message.

If the outgoing port was closed with close_outgoing, the method will raise Ractor::ClosedError.

r = Ractor.new do
  sleep(500)
  Ractor.yield 'Hello from ractor'
end
r.close_outgoing
r.take
# Ractor::ClosedError (The outgoing-port is already closed)
# The error would be raised immediately, not when ractor will try to receive

If an uncaught exception is raised in the Ractor, it is propagated by take as a Ractor::RemoteError.

r = Ractor.new {raise "Something weird happened"}

begin
  r.take
rescue => e
  p e              #  => #<Ractor::RemoteError: thrown by remote Ractor.>
  p e.ractor == r  # => true
  p e.cause        # => #<RuntimeError: Something weird happened>
end

Ractor::ClosedError is a descendant of StopIteration, so the termination of the ractor will break out of any loops that receive this message without propagating the error:

r = Ractor.new do
  3.times {|i| Ractor.yield "message #{i}"}
  "finishing"
end

loop {puts "Received: " + r.take}
puts "Continue successfully"

This will print:

Received: message 0
Received: message 1
Received: message 2
Received: finishing
Continue successfully

Basically the same as ::new. However, if class Thread is subclassed, then calling start in that subclass will not invoke the subclass’s initialize method.

Causes the given thread to exit, see also Thread::exit.

count = 0
a = Thread.new { loop { count += 1 } }
sleep(0.1)       #=> 0
Thread.kill(a)   #=> #<Thread:0x401b3d30 dead>
count            #=> 93947
a.alive?         #=> false

Waits for thr to complete, using join, and returns its value or raises the exception which terminated the thread.

a = Thread.new { 2 + 2 }
a.value   #=> 4

b = Thread.new { raise 'something went wrong' }
b.value   #=> RuntimeError: something went wrong

Terminates thr and schedules another thread to be run, returning the terminated Thread. If this is the main thread, or the last thread, exits the process.

Returns the status of thr.

"sleep"

Returned if this thread is sleeping or waiting on I/O

"run"

When this thread is executing

"aborting"

If this thread is aborting

false

When this thread is terminated normally

nil

If terminated with an exception.

a = Thread.new { raise("die now") }
b = Thread.new { Thread.stop }
c = Thread.new { Thread.exit }
d = Thread.new { sleep }
d.kill                  #=> #<Thread:0x401b3678 aborting>
a.status                #=> nil
b.status                #=> "sleep"
c.status                #=> false
d.status                #=> "aborting"
Thread.current.status   #=> "run"

See also the instance methods alive? and stop?

Returns true if thr is running or sleeping.

thr = Thread.new { }
thr.join                #=> #<Thread:0x401b3fb0 dead>
Thread.current.alive?   #=> true
thr.alive?              #=> false

See also stop? and status.

Returns internal information of TracePoint.

The contents of the returned value are implementation specific. It may be changed in future.

This method is only for debugging TracePoint itself.

Return the tag object which was called for.