Results for: "String#[]"

Returns true if the ipaddr is a link-local address. IPv4 addresses in 169.254.0.0/16 reserved by RFC 3927 and Link-Local IPv6 Unicast Addresses in fe80::/10 reserved by RFC 4291 are considered link-local.

Returns a string for DNS reverse lookup compatible with RFC1886.

Creates a Range object for the network address.

Returns the names of the binding’s local variables as symbols.

def foo
  a = 1
  2.times do |n|
    binding.local_variables #=> [:a, :n]
  end
end

This method is the short version of the following code:

binding.eval("local_variables")

Creates an option from the given parameters params. See Parameters for New Options.

The block, if given, is the handler for the created option. When the option is encountered during command-line parsing, the block is called with the argument given for the option, if any. See Option Handlers.

Creates an option from the given parameters params. See Parameters for New Options.

The block, if given, is the handler for the created option. When the option is encountered during command-line parsing, the block is called with the argument given for the option, if any. See Option Handlers.

Returns the length (in characters) of the matched substring corresponding to the given argument.

When non-negative argument n is given, returns the length of the matched substring for the nth match:

m = /(.)(.)(\d+)(\d)(\w)?/.match("THX1138.")
# => #<MatchData "HX1138" 1:"H" 2:"X" 3:"113" 4:"8" 5:nil>
m.match_length(0) # => 6
m.match_length(4) # => 1
m.match_length(5) # => nil

When string or symbol argument name is given, returns the length of the matched substring for the named match:

m = /(?<foo>.)(.)(?<bar>.+)/.match("hoge")
# => #<MatchData "hoge" foo:"h" bar:"ge">
m.match_length('foo') # => 1
m.match_length(:bar)  # => 2

Returns the substring of the target string from the end of the first match in self (that is, self[0]) to the end of the string; equivalent to regexp global variable $':

m = /(.)(.)(\d+)(\d)/.match("THX1138: The Movie")
# => #<MatchData "HX1138" 1:"H" 2:"X" 3:"113" 4:"8">
m[0]         # => "HX1138"
m.post_match # => ": The Movie"\

Related: MatchData.pre_match.

Bind umeth to recv and then invokes the method with the specified arguments. This is semantically equivalent to umeth.bind(recv).call(args, ...).

Changes asynchronous interrupt timing.

interrupt means asynchronous event and corresponding procedure by Thread#raise, Thread#kill, signal trap (not supported yet) and main thread termination (if main thread terminates, then all other thread will be killed).

The given hash has pairs like ExceptionClass => :TimingSymbol. Where the ExceptionClass is the interrupt handled by the given block. The TimingSymbol can be one of the following symbols:

:immediate

Invoke interrupts immediately.

:on_blocking

Invoke interrupts while BlockingOperation.

:never

Never invoke all interrupts.

BlockingOperation means that the operation will block the calling thread, such as read and write. On CRuby implementation, BlockingOperation is any operation executed without GVL.

Masked asynchronous interrupts are delayed until they are enabled. This method is similar to sigprocmask(3).

NOTE

Asynchronous interrupts are difficult to use.

If you need to communicate between threads, please consider to use another way such as Queue.

Or use them with deep understanding about this method.

Usage

In this example, we can guard from Thread#raise exceptions.

Using the :never TimingSymbol the RuntimeError exception will always be ignored in the first block of the main thread. In the second ::handle_interrupt block we can purposefully handle RuntimeError exceptions.

th = Thread.new do
  Thread.handle_interrupt(RuntimeError => :never) {
    begin
      # You can write resource allocation code safely.
      Thread.handle_interrupt(RuntimeError => :immediate) {
        # ...
      }
    ensure
      # You can write resource deallocation code safely.
    end
  }
end
Thread.pass
# ...
th.raise "stop"

While we are ignoring the RuntimeError exception, it’s safe to write our resource allocation code. Then, the ensure block is where we can safely deallocate your resources.

Guarding from Timeout::Error

In the next example, we will guard from the Timeout::Error exception. This will help prevent from leaking resources when Timeout::Error exceptions occur during normal ensure clause. For this example we use the help of the standard library Timeout, from lib/timeout.rb

require 'timeout'
Thread.handle_interrupt(Timeout::Error => :never) {
  timeout(10){
    # Timeout::Error doesn't occur here
    Thread.handle_interrupt(Timeout::Error => :on_blocking) {
      # possible to be killed by Timeout::Error
      # while blocking operation
    }
    # Timeout::Error doesn't occur here
  }
}

In the first part of the timeout block, we can rely on Timeout::Error being ignored. Then in the Timeout::Error => :on_blocking block, any operation that will block the calling thread is susceptible to a Timeout::Error exception being raised.

Stack control settings

It’s possible to stack multiple levels of ::handle_interrupt blocks in order to control more than one ExceptionClass and TimingSymbol at a time.

Thread.handle_interrupt(FooError => :never) {
  Thread.handle_interrupt(BarError => :never) {
     # FooError and BarError are prohibited.
  }
}

Inheritance with ExceptionClass

All exceptions inherited from the ExceptionClass parameter will be considered.

Thread.handle_interrupt(Exception => :never) {
  # all exceptions inherited from Exception are prohibited.
}

For handling all interrupts, use Object and not Exception as the ExceptionClass, as kill/terminate interrupts are not handled by Exception.

Returns an array of the names of the thread-local variables (as Symbols).

thr = Thread.new do
  Thread.current.thread_variable_set(:cat, 'meow')
  Thread.current.thread_variable_set("dog", 'woof')
end
thr.join               #=> #<Thread:0x401b3f10 dead>
thr.thread_variables   #=> [:dog, :cat]

Note that these are not fiber local variables. Please see Thread#[] and Thread#thread_variable_get for more details.

Returns true if the given string (or symbol) exists as a thread-local variable.

me = Thread.current
me.thread_variable_set(:oliver, "a")
me.thread_variable?(:oliver)    #=> true
me.thread_variable?(:stanley)   #=> false

Note that these are not fiber local variables. Please see Thread#[] and Thread#thread_variable_get for more details.

Returns the execution stack for the target thread—an array containing backtrace location objects.

See Thread::Backtrace::Location for more information.

This method behaves similarly to Kernel#caller_locations except it applies to a specific thread.

In general, while a TracePoint callback is running, other registered callbacks are not called to avoid confusion by reentrance. This method allows the reentrance in a given block. This method should be used carefully, otherwise the callback can be easily called infinitely.

If this method is called when the reentrance is already allowed, it raises a RuntimeError.

Example:

# Without reentry
# ---------------

line_handler = TracePoint.new(:line) do |tp|
  next if tp.path != __FILE__ # only work in this file
  puts "Line handler"
  binding.eval("class C; end")
end.enable

class_handler = TracePoint.new(:class) do |tp|
  puts "Class handler"
end.enable

class B
end

# This script will print "Class handler" only once: when inside :line
# handler, all other handlers are ignored

# With reentry
# ------------

line_handler = TracePoint.new(:line) do |tp|
  next if tp.path != __FILE__ # only work in this file
  next if (__LINE__..__LINE__+3).cover?(tp.lineno) # don't be invoked from itself
  puts "Line handler"
  TracePoint.allow_reentry { binding.eval("class C; end") }
end.enable

class_handler = TracePoint.new(:class) do |tp|
  puts "Class handler"
end.enable

class B
end

# This wil print "Class handler" twice: inside allow_reentry block in :line
# handler, other handlers are enabled.

Note that the example shows the principal effect of the method, but its practical usage is for debugging libraries that sometimes require other libraries hooks to not be affected by debugger being inside trace point handling. Precautions should be taken against infinite recursion in this case (note that we needed to filter out calls by itself from :line handler, otherwise it will call itself infinitely).

Return class or module of the method being called.

class C; def foo; end; end
trace = TracePoint.new(:call) do |tp|
  p tp.defined_class #=> C
end.enable do
  C.new.foo
end

If method is defined by a module, then that module is returned.

module M; def foo; end; end
class C; include M; end;
trace = TracePoint.new(:call) do |tp|
  p tp.defined_class #=> M
end.enable do
  C.new.foo
end

Note: defined_class returns singleton class.

6th block parameter of Kernel#set_trace_func passes original class of attached by singleton class.

This is a difference between Kernel#set_trace_func and TracePoint.

class C; def self.foo; end; end
trace = TracePoint.new(:call) do |tp|
  p tp.defined_class #=> #<Class:C>
end.enable do
  C.foo
end