Results for: "Pathname"

OpenSSL::Timestamp

Provides classes and methods to request, create and validate RFC3161-compliant timestamps. Request may be used to either create requests from scratch or to parse existing requests that again can be used to request timestamps from a timestamp server, e.g. via the net/http. The resulting timestamp response may be parsed using Response.

Please note that Response is read-only and immutable. To create a Response, an instance of Factory as well as a valid Request are needed.

Create a Response: 

#Assumes ts.p12 is a PKCS#12-compatible file with a private key
#and a certificate that has an extended key usage of 'timeStamping'
p12 = OpenSSL::PKCS12.new(File.binread('ts.p12'), 'pwd')
md = OpenSSL::Digest.new('SHA1')
hash = md.digest(data) #some binary data to be timestamped
req = OpenSSL::Timestamp::Request.new
req.algorithm = 'SHA1'
req.message_imprint = hash
req.policy_id = "1.2.3.4.5"
req.nonce = 42
fac = OpenSSL::Timestamp::Factory.new
fac.gen_time = Time.now
fac.serial_number = 1
timestamp = fac.create_timestamp(p12.key, p12.certificate, req)

Verify a timestamp response: 

#Assume we have a timestamp token in a file called ts.der
ts = OpenSSL::Timestamp::Response.new(File.binread('ts.der'))
#Assume we have the Request for this token in a file called req.der
req = OpenSSL::Timestamp::Request.new(File.binread('req.der'))
# Assume the associated root CA certificate is contained in a
# DER-encoded file named root.cer
root = OpenSSL::X509::Certificate.new(File.binread('root.cer'))
# get the necessary intermediate certificates, available in
# DER-encoded form in inter1.cer and inter2.cer
inter1 = OpenSSL::X509::Certificate.new(File.binread('inter1.cer'))
inter2 = OpenSSL::X509::Certificate.new(File.binread('inter2.cer'))
ts.verify(req, root, inter1, inter2) -> ts or raises an exception if validation fails

CSV::InputRecordSeparator

No documentation available

ERB::DefMethod

No documentation available

PP::PPMethods

No documentation available

Refinement

No documentation available

Numeric

Numeric is the class from which all higher-level numeric classes should inherit.

Numeric allows instantiation of heap-allocated objects. Other core numeric classes such as Integer are implemented as immediates, which means that each Integer is a single immutable object which is always passed by value.

a = 1
1.object_id == a.object_id   #=> true

There can only ever be one instance of the integer 1, for example. Ruby ensures this by preventing instantiation. If duplication is attempted, the same instance is returned.

Integer.new(1)                   #=> NoMethodError: undefined method `new' for Integer:Class
1.dup                            #=> 1
1.object_id == 1.dup.object_id   #=> true

For this reason, Numeric should be used when defining other numeric classes.

Classes which inherit from Numeric must implement coerce, which returns a two-member Array containing an object that has been coerced into an instance of the new class and self (see coerce).

Inheriting classes should also implement arithmetic operator methods (+, -, * and /) and the <=> operator (see Comparable). These methods may rely on coerce to ensure interoperability with instances of other numeric classes.

class Tally < Numeric
  def initialize(string)
    @string = string
  end

  def to_s
    @string
  end

  def to_i
    @string.size
  end

  def coerce(other)
    [self.class.new('|' * other.to_i), self]
  end

  def <=>(other)
    to_i <=> other.to_i
  end

  def +(other)
    self.class.new('|' * (to_i + other.to_i))
  end

  def -(other)
    self.class.new('|' * (to_i - other.to_i))
  end

  def *(other)
    self.class.new('|' * (to_i * other.to_i))
  end

  def /(other)
    self.class.new('|' * (to_i / other.to_i))
  end
end

tally = Tally.new('||')
puts tally * 2            #=> "||||"
puts tally > 1            #=> true

What’s Here

First, what’s elsewhere. Class Numeric:

Here, class Numeric provides methods for:

Querying

Comparing

Converting

Other

Float

A Float object represents a sometimes-inexact real number using the native architecture’s double-precision floating point representation.

Floating point has a different arithmetic and is an inexact number. So you should know its esoteric system. See following:

You can create a Float object explicitly with:

You can convert certain objects to Floats with:

What’s Here

First, what’s elsewhere. Class Float:

Here, class Float provides methods for:

Querying

Comparing

Converting

Continuation

Continuation objects are generated by Kernel#callcc, after having +require+d continuation. They hold a return address and execution context, allowing a nonlocal return to the end of the callcc block from anywhere within a program. Continuations are somewhat analogous to a structured version of C’s setjmp/longjmp (although they contain more state, so you might consider them closer to threads).

For instance:

require "continuation"
arr = [ "Freddie", "Herbie", "Ron", "Max", "Ringo" ]
callcc{|cc| $cc = cc}
puts(message = arr.shift)
$cc.call unless message =~ /Max/

produces:

Freddie
Herbie
Ron
Max

Also you can call callcc in other methods:

require "continuation"

def g
  arr = [ "Freddie", "Herbie", "Ron", "Max", "Ringo" ]
  cc = callcc { |cc| cc }
  puts arr.shift
  return cc, arr.size
end

def f
  c, size = g
  c.call(c) if size > 1
end

f

This (somewhat contrived) example allows the inner loop to abandon processing early:

require "continuation"
callcc {|cont|
  for i in 0..4
    print "#{i}: "
    for j in i*5...(i+1)*5
      cont.call() if j == 17
      printf "%3d", j
    end
  end
}
puts

produces:

0:   0  1  2  3  4
1:   5  6  7  8  9
2:  10 11 12 13 14
3:  15 16

StopIteration

Raised to stop the iteration, in particular by Enumerator#next. It is rescued by Kernel#loop.

loop do
  puts "Hello"
  raise StopIteration
  puts "World"
end
puts "Done!"

produces:

Hello
Done!

SystemExit

Raised by exit to initiate the termination of the script.

fatal

fatal is an Exception that is raised when Ruby has encountered a fatal error and must exit.

SignalException

Raised when a signal is received.

begin
  Process.kill('HUP',Process.pid)
  sleep # wait for receiver to handle signal sent by Process.kill
rescue SignalException => e
  puts "received Exception #{e}"
end

produces:

received Exception SIGHUP

ArgumentError

Raised when the arguments are wrong and there isn’t a more specific Exception class.

Ex: passing the wrong number of arguments

[1, 2, 3].first(4, 5)

raises the exception:

ArgumentError: wrong number of arguments (given 2, expected 1)

Ex: passing an argument that is not acceptable:

[1, 2, 3].first(-4)

raises the exception:

ArgumentError: negative array size

NotImplementedError

Raised when a feature is not implemented on the current platform. For example, methods depending on the fsync or fork system calls may raise this exception if the underlying operating system or Ruby runtime does not support them.

Note that if fork raises a NotImplementedError, then respond_to?(:fork) returns false.

RuntimeError

A generic error class raised when an invalid operation is attempted. Kernel#raise will raise a RuntimeError if no Exception class is specified.

raise "ouch"

raises the exception:

RuntimeError: ouch

NoMemoryError

Raised when memory allocation fails.

Date

Class Date provides methods for storing and manipulating calendar dates.

Consider using class Time instead of class Date if:

A Date object, once created, is immutable, and cannot be modified.

Creating a Date

You can create a date for the current date, using Date.today:

Date.today # => #<Date: 1999-12-31>

You can create a specific date from various combinations of arguments:

See also the specialized methods in “Specialized Format Strings” in Formats for Dates and Times

Argument limit

Certain singleton methods in Date that parse string arguments also take optional keyword argument limit, which can limit the length of the string argument.

When limit is:

Time

A Time object represents a date and time:

Time.new(2000, 1, 1, 0, 0, 0) # => 2000-01-01 00:00:00 -0600

Although its value can be expressed as a single numeric (see Epoch Seconds below), it can be convenient to deal with the value by parts:

t = Time.new(-2000, 1, 1, 0, 0, 0.0)
# => -2000-01-01 00:00:00 -0600
t.year # => -2000
t.month # => 1
t.mday # => 1
t.hour # => 0
t.min # => 0
t.sec # => 0
t.subsec # => 0

t = Time.new(2000, 12, 31, 23, 59, 59.5)
# => 2000-12-31 23:59:59.5 -0600
t.year # => 2000
t.month # => 12
t.mday # => 31
t.hour # => 23
t.min # => 59
t.sec # => 59
t.subsec # => (1/2)

Epoch Seconds

Epoch seconds is the exact number of seconds (including fractional subseconds) since the Unix Epoch, January 1, 1970.

You can retrieve that value exactly using method Time.to_r:

Time.at(0).to_r        # => (0/1)
Time.at(0.999999).to_r # => (9007190247541737/9007199254740992)

Other retrieval methods such as Time#to_i and Time#to_f may return a value that rounds or truncates subseconds.

Time Resolution

A Time object derived from the system clock (for example, by method Time.now) has the resolution supported by the system.

Examples

All of these examples were done using the EST timezone which is GMT-5.

Creating a New Time Instance

You can create a new instance of Time with Time.new. This will use the current system time. Time.now is an alias for this. You can also pass parts of the time to Time.new such as year, month, minute, etc. When you want to construct a time this way you must pass at least a year. If you pass the year with nothing else time will default to January 1 of that year at 00:00:00 with the current system timezone. Here are some examples:

Time.new(2002)         #=> 2002-01-01 00:00:00 -0500
Time.new(2002, 10)     #=> 2002-10-01 00:00:00 -0500
Time.new(2002, 10, 31) #=> 2002-10-31 00:00:00 -0500

You can pass a UTC offset:

Time.new(2002, 10, 31, 2, 2, 2, "+02:00") #=> 2002-10-31 02:02:02 +0200

Or a timezone object:

zone = timezone("Europe/Athens")      # Eastern European Time, UTC+2
Time.new(2002, 10, 31, 2, 2, 2, zone) #=> 2002-10-31 02:02:02 +0200

You can also use Time.local and Time.utc to infer local and UTC timezones instead of using the current system setting.

You can also create a new time using Time.at which takes the number of seconds (with subsecond) since the Unix Epoch.

Time.at(628232400) #=> 1989-11-28 00:00:00 -0500

Working with an Instance of Time

Once you have an instance of Time there is a multitude of things you can do with it. Below are some examples. For all of the following examples, we will work on the assumption that you have done the following:

t = Time.new(1993, 02, 24, 12, 0, 0, "+09:00")

Was that a monday?

t.monday? #=> false

What year was that again?

t.year #=> 1993

Was it daylight savings at the time?

t.dst? #=> false

What’s the day a year later?

t + (60*60*24*365) #=> 1994-02-24 12:00:00 +0900

How many seconds was that since the Unix Epoch?

t.to_i #=> 730522800

You can also do standard functions like compare two times.

t1 = Time.new(2010)
t2 = Time.new(2011)

t1 == t2 #=> false
t1 == t1 #=> true
t1 <  t2 #=> true
t1 >  t2 #=> false

Time.new(2010,10,31).between?(t1, t2) #=> true

What’s Here

First, what’s elsewhere. Class Time:

Here, class Time provides methods that are useful for:

Methods for Creating

Methods for Fetching

Methods for Querying

Methods for Comparing

Methods for Converting

Methods for Rounding

For the forms of argument zone, see Timezone Specifiers.

WIN32OLERuntimeError

Raised when OLE processing failed.

EX:

obj = WIN32OLE.new("NonExistProgID")

raises the exception:

WIN32OLERuntimeError: unknown OLE server: `NonExistProgID'
    HRESULT error code:0x800401f3
      Invalid class string

Delegator

This library provides three different ways to delegate method calls to an object. The easiest to use is SimpleDelegator. Pass an object to the constructor and all methods supported by the object will be delegated. This object can be changed later.

Going a step further, the top level DelegateClass method allows you to easily setup delegation through class inheritance. This is considerably more flexible and thus probably the most common use for this library.

Finally, if you need full control over the delegation scheme, you can inherit from the abstract class Delegator and customize as needed. (If you find yourself needing this control, have a look at Forwardable which is also in the standard library. It may suit your needs better.)

SimpleDelegator’s implementation serves as a nice example of the use of Delegator:

require 'delegate'

class SimpleDelegator < Delegator
  def __getobj__
    @delegate_sd_obj # return object we are delegating to, required
  end

  def __setobj__(obj)
    @delegate_sd_obj = obj # change delegation object,
                           # a feature we're providing
  end
end

Notes

Be advised, RDoc will not detect delegated methods.

SimpleDelegator

A concrete implementation of Delegator, this class provides the means to delegate all supported method calls to the object passed into the constructor and even to change the object being delegated to at a later time with __setobj__.

class User
  def born_on
    Date.new(1989, 9, 10)
  end
end

require 'delegate'

class UserDecorator < SimpleDelegator
  def birth_year
    born_on.year
  end
end

decorated_user = UserDecorator.new(User.new)
decorated_user.birth_year  #=> 1989
decorated_user.__getobj__  #=> #<User: ...>

A SimpleDelegator instance can take advantage of the fact that SimpleDelegator is a subclass of Delegator to call super to have methods called on the object being delegated to.

class SuperArray < SimpleDelegator
  def [](*args)
    super + 1
  end
end

SuperArray.new([1])[0]  #=> 2

Here’s a simple example that takes advantage of the fact that SimpleDelegator’s delegation object can be changed at any time.

class Stats
  def initialize
    @source = SimpleDelegator.new([])
  end

  def stats(records)
    @source.__setobj__(records)

    "Elements:  #{@source.size}\n" +
    " Non-Nil:  #{@source.compact.size}\n" +
    "  Unique:  #{@source.uniq.size}\n"
  end
end

s = Stats.new
puts s.stats(%w{James Edward Gray II})
puts
puts s.stats([1, 2, 3, nil, 4, 5, 1, 2])

Prints:

Elements:  4
 Non-Nil:  4
  Unique:  4

Elements:  8
 Non-Nil:  7
  Unique:  6

IPAddr

IPAddr provides a set of methods to manipulate an IP address. Both IPv4 and IPv6 are supported.

Example 

require 'ipaddr'

ipaddr1 = IPAddr.new "3ffe:505:2::1"

p ipaddr1                   #=> #<IPAddr: IPv6:3ffe:0505:0002:0000:0000:0000:0000:0001/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff>

p ipaddr1.to_s              #=> "3ffe:505:2::1"

ipaddr2 = ipaddr1.mask(48)  #=> #<IPAddr: IPv6:3ffe:0505:0002:0000:0000:0000:0000:0000/ffff:ffff:ffff:0000:0000:0000:0000:0000>

p ipaddr2.to_s              #=> "3ffe:505:2::"

ipaddr3 = IPAddr.new "192.168.2.0/24"

p ipaddr3                   #=> #<IPAddr: IPv4:192.168.2.0/255.255.255.0>

OptionParser

OptionParser

New to OptionParser?

See the Tutorial.

Introduction

OptionParser is a class for command-line option analysis. It is much more advanced, yet also easier to use, than GetoptLong, and is a more Ruby-oriented solution.

Features

  1. The argument specification and the code to handle it are written in the same place.

  2. It can output an option summary; you don’t need to maintain this string separately.

  3. Optional and mandatory arguments are specified very gracefully.

  4. Arguments can be automatically converted to a specified class.

  5. Arguments can be restricted to a certain set.

All of these features are demonstrated in the examples below. See make_switch for full documentation.

Minimal example 

require 'optparse'

options = {}
OptionParser.new do |parser|
  parser.banner = "Usage: example.rb [options]"

  parser.on("-v", "--[no-]verbose", "Run verbosely") do |v|
    options[:verbose] = v
  end
end.parse!

p options
p ARGV

Generating Help

OptionParser can be used to automatically generate help for the commands you write:

require 'optparse'

Options = Struct.new(:name)

class Parser
  def self.parse(options)
    args = Options.new("world")

    opt_parser = OptionParser.new do |parser|
      parser.banner = "Usage: example.rb [options]"

      parser.on("-nNAME", "--name=NAME", "Name to say hello to") do |n|
        args.name = n
      end

      parser.on("-h", "--help", "Prints this help") do
        puts parser
        exit
      end
    end

    opt_parser.parse!(options)
    return args
  end
end
options = Parser.parse %w[--help]

#=>
   # Usage: example.rb [options]
   #     -n, --name=NAME                  Name to say hello to
   #     -h, --help                       Prints this help

Required Arguments

For options that require an argument, option specification strings may include an option name in all caps. If an option is used without the required argument, an exception will be raised.

require 'optparse'

options = {}
OptionParser.new do |parser|
  parser.on("-r", "--require LIBRARY",
            "Require the LIBRARY before executing your script") do |lib|
    puts "You required #{lib}!"
  end
end.parse!

Used:

$ ruby optparse-test.rb -r
optparse-test.rb:9:in `<main>': missing argument: -r (OptionParser::MissingArgument)
$ ruby optparse-test.rb -r my-library
You required my-library!

Type Coercion

OptionParser supports the ability to coerce command line arguments into objects for us.

OptionParser comes with a few ready-to-use kinds of type coercion. They are:

We can also add our own coercions, which we will cover below.

Using Built-in Conversions

As an example, the built-in Time conversion is used. The other built-in conversions behave in the same way. OptionParser will attempt to parse the argument as a Time. If it succeeds, that time will be passed to the handler block. Otherwise, an exception will be raised.

require 'optparse'
require 'optparse/time'
OptionParser.new do |parser|
  parser.on("-t", "--time [TIME]", Time, "Begin execution at given time") do |time|
    p time
  end
end.parse!

Used:

$ ruby optparse-test.rb  -t nonsense
... invalid argument: -t nonsense (OptionParser::InvalidArgument)
$ ruby optparse-test.rb  -t 10-11-12
2010-11-12 00:00:00 -0500
$ ruby optparse-test.rb  -t 9:30
2014-08-13 09:30:00 -0400

Creating Custom Conversions

The accept method on OptionParser may be used to create converters. It specifies which conversion block to call whenever a class is specified. The example below uses it to fetch a User object before the on handler receives it.

require 'optparse'

User = Struct.new(:id, :name)

def find_user id
  not_found = ->{ raise "No User Found for id #{id}" }
  [ User.new(1, "Sam"),
    User.new(2, "Gandalf") ].find(not_found) do |u|
    u.id == id
  end
end

op = OptionParser.new
op.accept(User) do |user_id|
  find_user user_id.to_i
end

op.on("--user ID", User) do |user|
  puts user
end

op.parse!

Used:

$ ruby optparse-test.rb --user 1
#<struct User id=1, name="Sam">
$ ruby optparse-test.rb --user 2
#<struct User id=2, name="Gandalf">
$ ruby optparse-test.rb --user 3
optparse-test.rb:15:in `block in find_user': No User Found for id 3 (RuntimeError)

Store options to a Hash

The into option of order, parse and so on methods stores command line options into a Hash.

require 'optparse'

options = {}
OptionParser.new do |parser|
  parser.on('-a')
  parser.on('-b NUM', Integer)
  parser.on('-v', '--verbose')
end.parse!(into: options)

p options

Used:

$ ruby optparse-test.rb -a
{:a=>true}
$ ruby optparse-test.rb -a -v
{:a=>true, :verbose=>true}
$ ruby optparse-test.rb -a -b 100
{:a=>true, :b=>100}

Complete example

The following example is a complete Ruby program. You can run it and see the effect of specifying various options. This is probably the best way to learn the features of optparse.

require 'optparse'
require 'optparse/time'
require 'ostruct'
require 'pp'

class OptparseExample
  Version = '1.0.0'

  CODES = %w[iso-2022-jp shift_jis euc-jp utf8 binary]
  CODE_ALIASES = { "jis" => "iso-2022-jp", "sjis" => "shift_jis" }

  class ScriptOptions
    attr_accessor :library, :inplace, :encoding, :transfer_type,
                  :verbose, :extension, :delay, :time, :record_separator,
                  :list

    def initialize
      self.library = []
      self.inplace = false
      self.encoding = "utf8"
      self.transfer_type = :auto
      self.verbose = false
    end

    def define_options(parser)
      parser.banner = "Usage: example.rb [options]"
      parser.separator ""
      parser.separator "Specific options:"

      # add additional options
      perform_inplace_option(parser)
      delay_execution_option(parser)
      execute_at_time_option(parser)
      specify_record_separator_option(parser)
      list_example_option(parser)
      specify_encoding_option(parser)
      optional_option_argument_with_keyword_completion_option(parser)
      boolean_verbose_option(parser)

      parser.separator ""
      parser.separator "Common options:"
      # No argument, shows at tail.  This will print an options summary.
      # Try it and see!
      parser.on_tail("-h", "--help", "Show this message") do
        puts parser
        exit
      end
      # Another typical switch to print the version.
      parser.on_tail("--version", "Show version") do
        puts Version
        exit
      end
    end

    def perform_inplace_option(parser)
      # Specifies an optional option argument
      parser.on("-i", "--inplace [EXTENSION]",
                "Edit ARGV files in place",
                "(make backup if EXTENSION supplied)") do |ext|
        self.inplace = true
        self.extension = ext || ''
        self.extension.sub!(/\A\.?(?=.)/, ".")  # Ensure extension begins with dot.
      end
    end

    def delay_execution_option(parser)
      # Cast 'delay' argument to a Float.
      parser.on("--delay N", Float, "Delay N seconds before executing") do |n|
        self.delay = n
      end
    end

    def execute_at_time_option(parser)
      # Cast 'time' argument to a Time object.
      parser.on("-t", "--time [TIME]", Time, "Begin execution at given time") do |time|
        self.time = time
      end
    end

    def specify_record_separator_option(parser)
      # Cast to octal integer.
      parser.on("-F", "--irs [OCTAL]", OptionParser::OctalInteger,
                "Specify record separator (default \\0)") do |rs|
        self.record_separator = rs
      end
    end

    def list_example_option(parser)
      # List of arguments.
      parser.on("--list x,y,z", Array, "Example 'list' of arguments") do |list|
        self.list = list
      end
    end

    def specify_encoding_option(parser)
      # Keyword completion.  We are specifying a specific set of arguments (CODES
      # and CODE_ALIASES - notice the latter is a Hash), and the user may provide
      # the shortest unambiguous text.
      code_list = (CODE_ALIASES.keys + CODES).join(', ')
      parser.on("--code CODE", CODES, CODE_ALIASES, "Select encoding",
                "(#{code_list})") do |encoding|
        self.encoding = encoding
      end
    end

    def optional_option_argument_with_keyword_completion_option(parser)
      # Optional '--type' option argument with keyword completion.
      parser.on("--type [TYPE]", [:text, :binary, :auto],
                "Select transfer type (text, binary, auto)") do |t|
        self.transfer_type = t
      end
    end

    def boolean_verbose_option(parser)
      # Boolean switch.
      parser.on("-v", "--[no-]verbose", "Run verbosely") do |v|
        self.verbose = v
      end
    end
  end

  #
  # Return a structure describing the options.
  #
  def parse(args)
    # The options specified on the command line will be collected in
    # *options*.

    @options = ScriptOptions.new
    @args = OptionParser.new do |parser|
      @options.define_options(parser)
      parser.parse!(args)
    end
    @options
  end

  attr_reader :parser, :options
end  # class OptparseExample

example = OptparseExample.new
options = example.parse(ARGV)
pp options # example.options
pp ARGV

Shell Completion

For modern shells (e.g. bash, zsh, etc.), you can use shell completion for command line options.

Further documentation

The above examples, along with the accompanying Tutorial, should be enough to learn how to use this class. If you have any questions, file a ticket at bugs.ruby-lang.org.

Data

Class Data provides a convenient way to define simple classes for value-alike objects.

The simplest example of usage:

Measure = Data.define(:amount, :unit)

# Positional arguments constructor is provided
distance = Measure.new(100, 'km')
#=> #<data Measure amount=100, unit="km">

# Keyword arguments constructor is provided
weight = Measure.new(amount: 50, unit: 'kg')
#=> #<data Measure amount=50, unit="kg">

# Alternative form to construct an object:
speed = Measure[10, 'mPh']
#=> #<data Measure amount=10, unit="mPh">

# Works with keyword arguments, too:
area = Measure[amount: 1.5, unit: 'm^2']
#=> #<data Measure amount=1.5, unit="m^2">

# Argument accessors are provided:
distance.amount #=> 100
distance.unit #=> "km"

Constructed object also has a reasonable definitions of == operator, to_h hash conversion, and deconstruct/#deconstruct_keys to be used in pattern matching.

::define method accepts an optional block and evaluates it in the context of the newly defined class. That allows to define additional methods:

Measure = Data.define(:amount, :unit) do
  def <=>(other)
    return unless other.is_a?(self.class) && other.unit == unit
    amount <=> other.amount
  end

  include Comparable
end

Measure[3, 'm'] < Measure[5, 'm'] #=> true
Measure[3, 'm'] < Measure[5, 'kg']
# comparison of Measure with Measure failed (ArgumentError)

Data provides no member writers, or enumerators: it is meant to be a storage for immutable atomic values. But note that if some of data members is of a mutable class, Data does no additional immutability enforcement:

Event = Data.define(:time, :weekdays)
event = Event.new('18:00', %w[Tue Wed Fri])
#=> #<data Event time="18:00", weekdays=["Tue", "Wed", "Fri"]>

# There is no #time= or #weekdays= accessors, but changes are
# still possible:
event.weekdays << 'Sat'
event
#=> #<data Event time="18:00", weekdays=["Tue", "Wed", "Fri", "Sat"]>

See also Struct, which is a similar concept, but has more container-alike API, allowing to change contents of the object and enumerate it.

FloatDomainError

Raised when attempting to convert special float values (in particular Infinity or NaN) to numerical classes which don’t support them.

Float::INFINITY.to_r   #=> FloatDomainError: Infinity
Previous Next
Search took: 12ms  ·  Total Results: 2267