Flushes input and output buffers in kernel.
You must require ‘io/console’ to use this method.
Returns true if an IO object is in non-blocking mode.
Enables non-blocking mode on a stream when set to true, and blocking mode when set to false.
This method set or clear O_NONBLOCK flag for the file descriptor in ios.
The behavior of most IO methods is not affected by this flag because they retry system calls to complete their task after EAGAIN and partial read/write. (An exception is IO#syswrite which doesn’t retry.)
This method can be used to clear non-blocking mode of standard I/O. Since nonblocking methods (read_nonblock, etc.) set non-blocking mode but they doesn’t clear it, this method is usable as follows.
END { STDOUT.nonblock = false } STDOUT.write_nonblock("foo")
Since the flag is shared across processes and many non-Ruby commands doesn’t expect standard I/O with non-blocking mode, it would be safe to clear the flag before Ruby program exits.
For example following Ruby program leaves STDIN/STDOUT/STDER non-blocking mode. (STDIN, STDOUT and STDERR are connected to a terminal. So making one of them nonblocking-mode effects other two.) Thus cat command try to read from standard input and it causes “Resource temporarily unavailable” error (EAGAIN).
% ruby -e '
STDOUT.write_nonblock("foo\n")'; cat
foo
cat: -: Resource temporarily unavailable
Clearing the flag makes the behavior of cat command normal. (cat command waits input from standard input.)
% ruby -rio/nonblock -e '
END { STDOUT.nonblock = false }
STDOUT.write_nonblock("foo")
'; cat
foo
Yields self in non-blocking mode.
When false is given as an argument, self is yielded in blocking mode. The original mode is restored after the block is executed.
The expect library adds instance method IO#expect, which is similar to the TCL expect extension.
To use this method, you must require expect:
require 'expect'
Reads from the IO until the given pattern matches or the timeout is over.
It returns an array with the read buffer, followed by the matches. If a block is given, the result is yielded to the block and returns nil.
When called without a block, it waits until the input that matches the given pattern is obtained from the IO or the time specified as the timeout passes. An array is returned when the pattern is obtained from the IO. The first element of the array is the entire string obtained from the IO until the pattern matches, followed by elements indicating which the pattern which matched to the anchor in the regular expression.
The optional timeout parameter defines, in seconds, the total time to wait for the pattern. If the timeout expires or eof is found, nil is returned or yielded. However, the buffer in a timeout session is kept for the next expect call. The default timeout is 9999999 seconds.
Get the internal timeout duration or nil if it was not set.
Set the internal timeout to the specified duration or nil. The timeout applies to all blocking operations where possible.
This affects the following methods (but is not limited to): gets, puts, read, write, wait_readable and wait_writable. This also affects blocking socket operations like Socket#accept and Socket#connect.
Some operations like File#open and IO#close are not affected by the timeout. A timeout during a write operation may leave the IO in an inconsistent state, e.g. data was partially written. Generally speaking, a timeout is a last ditch effort to prevent an application from hanging on slow I/O operations, such as those that occur during a slowloris attack.
Immediately writes to disk all data buffered in the stream, via the operating system’s fsync(2).
Note this difference:
IO#sync=: Ensures that data is flushed from the stream’s internal buffers, but does not guarantee that the operating system actually writes the data to disk.
IO#fsync: Ensures both that data is flushed from internal buffers, and that data is written to disk.
Raises an exception if the operating system does not support fsync(2).
Immediately writes to disk all data buffered in the stream, via the operating system’s: fdatasync(2), if supported, otherwise via fsync(2), if supported; otherwise raises an exception.
Returns the current sync mode of the stream. When sync mode is true, all output is immediately flushed to the underlying operating system and is not buffered by Ruby internally. See also fsync.
f = File.open('t.tmp', 'w') f.sync # => false f.sync = true f.sync # => true f.close
Sets the sync mode for the stream to the given value; returns the given value.
Values for the sync mode:
true: All output is immediately flushed to the underlying operating system and is not buffered internally.
false: Output may be buffered internally.
Example;
f = File.open('t.tmp', 'w') f.sync # => false f.sync = true f.sync # => true f.close
Related: IO#fsync.
Reads up to maxlen bytes from the stream; returns a string (either a new string or the given out_string). Its encoding is:
The unchanged encoding of out_string, if out_string is given.
ASCII-8BIT, otherwise.
Contains maxlen bytes from the stream, if available.
Otherwise contains all available bytes, if any available.
Otherwise is an empty string.
With the single non-negative integer argument maxlen given, returns a new string:
f = File.new('t.txt') f.readpartial(20) # => "First line\nSecond l" f.readpartial(20) # => "ine\n\nFourth line\n" f.readpartial(20) # => "Fifth line\n" f.readpartial(20) # Raises EOFError. f.close
With both argument maxlen and string argument out_string given, returns modified out_string:
f = File.new('t.txt') s = 'foo' f.readpartial(20, s) # => "First line\nSecond l" s = 'bar' f.readpartial(0, s) # => "" f.close
This method is useful for a stream such as a pipe, a socket, or a tty. It blocks only when no data is immediately available. This means that it blocks only when all of the following are true:
The byte buffer in the stream is empty.
The content of the stream is empty.
The stream is not at EOF.
When blocked, the method waits for either more data or EOF on the stream:
If more data is read, the method returns the data.
If EOF is reached, the method raises EOFError.
When not blocked, the method responds immediately:
Returns data from the buffer if there is any.
Otherwise returns data from the stream if there is any.
Otherwise raises EOFError if the stream has reached EOF.
Note that this method is similar to sysread. The differences are:
If the byte buffer is not empty, read from the byte buffer instead of “sysread for buffered IO (IOError)”.
It doesn’t cause Errno::EWOULDBLOCK and Errno::EINTR. When readpartial meets EWOULDBLOCK and EINTR by read system call, readpartial retries the system call.
The latter means that readpartial is non-blocking-flag insensitive. It blocks on the situation IO#sysread causes Errno::EWOULDBLOCK as if the fd is blocking mode.
Examples:
# # Returned Buffer Content Pipe Content r, w = IO.pipe # w << 'abc' # "" "abc". r.readpartial(4096) # => "abc" "" "" r.readpartial(4096) # (Blocks because buffer and pipe are empty.) # # Returned Buffer Content Pipe Content r, w = IO.pipe # w << 'abc' # "" "abc" w.close # "" "abc" EOF r.readpartial(4096) # => "abc" "" EOF r.readpartial(4096) # raises EOFError # # Returned Buffer Content Pipe Content r, w = IO.pipe # w << "abc\ndef\n" # "" "abc\ndef\n" r.gets # => "abc\n" "def\n" "" w << "ghi\n" # "def\n" "ghi\n" r.readpartial(4096) # => "def\n" "" "ghi\n" r.readpartial(4096) # => "ghi\n" "" ""
Pushes back (“unshifts”) the given data onto the stream’s buffer, placing the data so that it is next to be read; returns nil. See Byte IO.
Note that:
Calling the method has no effect with unbuffered reads (such as IO#sysread).
Calling rewind on the stream discards the pushed-back data.
When argument integer is given, uses only its low-order byte:
File.write('t.tmp', '012') f = File.open('t.tmp') f.ungetbyte(0x41) # => nil f.read # => "A012" f.rewind f.ungetbyte(0x4243) # => nil f.read # => "C012" f.close
When argument string is given, uses all bytes:
File.write('t.tmp', '012') f = File.open('t.tmp') f.ungetbyte('A') # => nil f.read # => "A012" f.rewind f.ungetbyte('BCDE') # => nil f.read # => "BCDE012" f.close
Pushes back (“unshifts”) the given data onto the stream’s buffer, placing the data so that it is next to be read; returns nil. See Character IO.
Note that:
Calling the method has no effect with unbuffered reads (such as IO#sysread).
Calling rewind on the stream discards the pushed-back data.
When argument integer is given, interprets the integer as a character:
File.write('t.tmp', '012') f = File.open('t.tmp') f.ungetc(0x41) # => nil f.read # => "A012" f.rewind f.ungetc(0x0442) # => nil f.getc.ord # => 1090 f.close
When argument string is given, uses all characters:
File.write('t.tmp', '012') f = File.open('t.tmp') f.ungetc('A') # => nil f.read # => "A012" f.rewind f.ungetc("\u0442\u0435\u0441\u0442") # => nil f.getc.ord # => 1090 f.getc.ord # => 1077 f.getc.ord # => 1089 f.getc.ord # => 1090 f.close
Returns a string representation of self:
f = File.open('t.txt') f.inspect # => "#<File:t.txt>" f.close
Returns a string containing a detailed summary of the keys and values.
Returns a string representation of self, including begin.inspect and end.inspect:
(1..4).inspect # => "1..4" (1...4).inspect # => "1...4" (1..).inspect # => "1.." (..4).inspect # => "..4"
Note that returns from to_s and inspect may differ:
('a'..'d').to_s # => "a..d" ('a'..'d').inspect # => "\"a\"..\"d\""
Related: Range#to_s.
Returns true if object is an element of self, false otherwise:
(1..4).include?(2) # => true (1..4).include?(5) # => false (1..4).include?(4) # => true (1...4).include?(4) # => false ('a'..'d').include?('b') # => true ('a'..'d').include?('e') # => false ('a'..'d').include?('B') # => false ('a'..'d').include?('d') # => true ('a'...'d').include?('d') # => false
If begin and end are numeric, include? behaves like cover?
(1..3).include?(1.5) # => true (1..3).cover?(1.5) # => true
But when not numeric, the two methods may differ:
('a'..'d').include?('cc') # => false ('a'..'d').cover?('cc') # => true
Related: Range#cover?.
Range#member? is an alias for Range#include?.
Returns the count of elements, based on an argument or block criterion, if given.
With no argument and no block given, returns the number of elements:
(1..4).count # => 4 (1...4).count # => 3 ('a'..'d').count # => 4 ('a'...'d').count # => 3 (1..).count # => Infinity (..4).count # => Infinity
With argument object, returns the number of object found in self, which will usually be zero or one:
(1..4).count(2) # => 1 (1..4).count(5) # => 0 (1..4).count('a') # => 0
With a block given, calls the block with each element; returns the number of elements for which the block returns a truthy value:
(1..4).count {|element| element < 3 } # => 2
Related: Range#size.
Returns a nicely-formatted string representation of self:
/ab+c/ix.inspect # => "/ab+c/ix"
Related: Regexp#to_s.
It returns the timeout interval for Regexp matching in second. nil means no default timeout configuration.
This configuration is per-object. The global configuration set by Regexp.timeout= is ignored if per-object configuration is set.
re = Regexp.new("^a*b?a*$", timeout: 1) re.timeout #=> 1.0 re =~ "a" * 100000 + "x" #=> regexp match timeout (RuntimeError)
It returns the current default timeout interval for Regexp matching in second. nil means no default timeout configuration.
It sets the default timeout interval for Regexp matching in second. nil means no default timeout configuration. This configuration is process-global. If you want to set timeout for each Regexp, use timeout keyword for Regexp.new.
Regexp.timeout = 1 /^a*b?a*$/ =~ "a" * 100000 + "x" #=> regexp match timeout (RuntimeError)
Returns true if the set contains the given object.
Note that include? and member? do not test member equality using == as do other Enumerables.
See also Enumerable#include?
Returns true if the set and the given enumerable have at least one element in common.
Set[1, 2, 3].intersect? Set[4, 5] #=> false Set[1, 2, 3].intersect? Set[3, 4] #=> true Set[1, 2, 3].intersect? 4..5 #=> false Set[1, 2, 3].intersect? [3, 4] #=> true