Returns a new regexp that is the union of the given patterns:
r = Regexp.union(%w[cat dog]) # => /cat|dog/ r.match('cat') # => #<MatchData "cat"> r.match('dog') # => #<MatchData "dog"> r.match('cog') # => nil
For each pattern that is a string, Regexp.new(pattern) is used:
Regexp.union('penzance') # => /penzance/ Regexp.union('a+b*c') # => /a\+b\*c/ Regexp.union('skiing', 'sledding') # => /skiing|sledding/ Regexp.union(['skiing', 'sledding']) # => /skiing|sledding/
For each pattern that is a regexp, it is used as is, including its flags:
Regexp.union(/foo/i, /bar/m, /baz/x) # => /(?i-mx:foo)|(?m-ix:bar)|(?x-mi:baz)/ Regexp.union([/foo/i, /bar/m, /baz/x]) # => /(?i-mx:foo)|(?m-ix:bar)|(?x-mi:baz)/
With no arguments, returns /(?!)/:
Regexp.union # => /(?!)/
If any regexp pattern contains captures, the behavior is unspecified.
Returns the member names of the Struct descendant as an array:
Customer = Struct.new(:name, :address, :zip) Customer.members # => [:name, :address, :zip]
Returns the member names from self as an array:
Customer = Struct.new(:name, :address, :zip) Customer.new.members # => [:name, :address, :zip]
Related: to_a.
Returns clean pathname of self with consecutive slashes and useless dots removed. The filesystem is not accessed.
If consider_symlink is true, then a more conservative algorithm is used to avoid breaking symbolic linkages. This may retain more .. entries than absolutely necessary, but without accessing the filesystem, this can’t be avoided.
See Pathname#realpath.
Returns an array of interface addresses. An element of the array is an instance of Socket::Ifaddr.
This method can be used to find multicast-enabled interfaces:
pp Socket.getifaddrs.reject {|ifaddr| !ifaddr.addr.ip? || (ifaddr.flags & Socket::IFF_MULTICAST == 0) }.map {|ifaddr| [ifaddr.name, ifaddr.ifindex, ifaddr.addr] } #=> [["eth0", 2, #<Addrinfo: 221.186.184.67>], # ["eth0", 2, #<Addrinfo: fe80::216:3eff:fe95:88bb%eth0>]]
Example result on GNU/Linux:
pp Socket.getifaddrs #=> [#<Socket::Ifaddr lo UP,LOOPBACK,RUNNING,0x10000 PACKET[protocol=0 lo hatype=772 HOST hwaddr=00:00:00:00:00:00]>, # #<Socket::Ifaddr eth0 UP,BROADCAST,RUNNING,MULTICAST,0x10000 PACKET[protocol=0 eth0 hatype=1 HOST hwaddr=00:16:3e:95:88:bb] broadcast=PACKET[protocol=0 eth0 hatype=1 HOST hwaddr=ff:ff:ff:ff:ff:ff]>, # #<Socket::Ifaddr sit0 NOARP PACKET[protocol=0 sit0 hatype=776 HOST hwaddr=00:00:00:00]>, # #<Socket::Ifaddr lo UP,LOOPBACK,RUNNING,0x10000 127.0.0.1 netmask=255.0.0.0>, # #<Socket::Ifaddr eth0 UP,BROADCAST,RUNNING,MULTICAST,0x10000 221.186.184.67 netmask=255.255.255.240 broadcast=221.186.184.79>, # #<Socket::Ifaddr lo UP,LOOPBACK,RUNNING,0x10000 ::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff>, # #<Socket::Ifaddr eth0 UP,BROADCAST,RUNNING,MULTICAST,0x10000 fe80::216:3eff:fe95:88bb%eth0 netmask=ffff:ffff:ffff:ffff::>]
Example result on FreeBSD:
pp Socket.getifaddrs #=> [#<Socket::Ifaddr usbus0 UP,0x10000 LINK[usbus0]>, # #<Socket::Ifaddr re0 UP,BROADCAST,RUNNING,MULTICAST,0x800 LINK[re0 3a:d0:40:9a:fe:e8]>, # #<Socket::Ifaddr re0 UP,BROADCAST,RUNNING,MULTICAST,0x800 10.250.10.18 netmask=255.255.255.? (7 bytes for 16 bytes sockaddr_in) broadcast=10.250.10.255>, # #<Socket::Ifaddr re0 UP,BROADCAST,RUNNING,MULTICAST,0x800 fe80:2::38d0:40ff:fe9a:fee8 netmask=ffff:ffff:ffff:ffff::>, # #<Socket::Ifaddr re0 UP,BROADCAST,RUNNING,MULTICAST,0x800 2001:2e8:408:10::12 netmask=UNSPEC>, # #<Socket::Ifaddr plip0 POINTOPOINT,MULTICAST,0x800 LINK[plip0]>, # #<Socket::Ifaddr lo0 UP,LOOPBACK,RUNNING,MULTICAST LINK[lo0]>, # #<Socket::Ifaddr lo0 UP,LOOPBACK,RUNNING,MULTICAST ::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff>, # #<Socket::Ifaddr lo0 UP,LOOPBACK,RUNNING,MULTICAST fe80:4::1 netmask=ffff:ffff:ffff:ffff::>, # #<Socket::Ifaddr lo0 UP,LOOPBACK,RUNNING,MULTICAST 127.0.0.1 netmask=255.?.?.? (5 bytes for 16 bytes sockaddr_in)>]
Obtains the port number for service_name.
If protocol_name is not given, “tcp” is assumed.
Socket.getservbyname("smtp") #=> 25 Socket.getservbyname("shell") #=> 514 Socket.getservbyname("syslog", "udp") #=> 514
Obtains the port number for port.
If protocol_name is not given, “tcp” is assumed.
Socket.getservbyport(80) #=> "www" Socket.getservbyport(514, "tcp") #=> "shell" Socket.getservbyport(514, "udp") #=> "syslog"
Gets a socket option. These are protocol and system specific, see your local system documentation for details. The option is returned as a Socket::Option object.
level is an integer, usually one of the SOL_ constants such as Socket::SOL_SOCKET, or a protocol level. A string or symbol of the name, possibly without prefix, is also accepted.
optname is an integer, usually one of the SO_ constants, such as Socket::SO_REUSEADDR. A string or symbol of the name, possibly without prefix, is also accepted.
Some socket options are integers with boolean values, in this case getsockopt could be called like this:
reuseaddr = sock.getsockopt(:SOCKET, :REUSEADDR).bool optval = sock.getsockopt(Socket::SOL_SOCKET,Socket::SO_REUSEADDR) optval = optval.unpack "i" reuseaddr = optval[0] == 0 ? false : true
Some socket options are integers with numeric values, in this case getsockopt could be called like this:
ipttl = sock.getsockopt(:IP, :TTL).int optval = sock.getsockopt(Socket::IPPROTO_IP, Socket::IP_TTL) ipttl = optval.unpack1("i")
Option values may be structs. Decoding them can be complex as it involves examining your system headers to determine the correct definition. An example is a +struct linger+, which may be defined in your system headers as:
struct linger { int l_onoff; int l_linger; };
In this case getsockopt could be called like this:
# Socket::Option knows linger structure. onoff, linger = sock.getsockopt(:SOCKET, :LINGER).linger optval = sock.getsockopt(Socket::SOL_SOCKET, Socket::SO_LINGER) onoff, linger = optval.unpack "ii" onoff = onoff == 0 ? false : true
Runs the early binding method to get property. The 1st argument specifies dispatch ID, the 2nd argument specifies the array of arguments, the 3rd argument specifies the array of the type of arguments.
excel = WIN32OLE.new('Excel.Application') puts excel._getproperty(558, [], []) # same effect as puts excel.visible
Returns the value that determines whether headers are used; used for parsing; see {Option headers}:
CSV.new('').headers # => nil
With no block, installs a field converter (a Proc).
With a block, defines and installs a custom field converter.
Returns the Array of installed field converters.
Argument converter_name, if given, should be the name of an existing field converter.
See Field Converters.
With no block, installs a field converter:
csv = CSV.new('') csv.convert(:integer) csv.convert(:float) csv.convert(:date) csv.converters # => [:integer, :float, :date]
The block, if given, is called for each field:
Argument field is the field value.
Argument field_info is a CSV::FieldInfo object containing details about the field.
The examples here assume the prior execution of:
string = "foo,0\nbar,1\nbaz,2\n" path = 't.csv' File.write(path, string)
Example giving a block:
csv = CSV.open(path) csv.convert {|field, field_info| p [field, field_info]; field.upcase } csv.read # => [["FOO", "0"], ["BAR", "1"], ["BAZ", "2"]]
Output:
["foo", #<struct CSV::FieldInfo index=0, line=1, header=nil>] ["0", #<struct CSV::FieldInfo index=1, line=1, header=nil>] ["bar", #<struct CSV::FieldInfo index=0, line=2, header=nil>] ["1", #<struct CSV::FieldInfo index=1, line=2, header=nil>] ["baz", #<struct CSV::FieldInfo index=0, line=3, header=nil>] ["2", #<struct CSV::FieldInfo index=1, line=3, header=nil>]
The block need not return a String object:
csv = CSV.open(path) csv.convert {|field, field_info| field.to_sym } csv.read # => [[:foo, :"0"], [:bar, :"1"], [:baz, :"2"]]
If converter_name is given, the block is not called:
csv = CSV.open(path) csv.convert(:integer) {|field, field_info| fail 'Cannot happen' } csv.read # => [["foo", 0], ["bar", 1], ["baz", 2]]
Raises a parse-time exception if converter_name is not the name of a built-in field converter:
csv = CSV.open(path) csv.convert(:nosuch) => [nil] # Raises NoMethodError (undefined method `arity' for nil:NilClass) csv.read
Returns an array of member names of the data class:
Measure = Data.define(:amount, :unit) Measure.members # => [:amount, :unit]
Returns the member names from self as an array:
Measure = Data.define(:amount, :unit) distance = Measure[10, 'km'] distance.members #=> [:amount, :unit]
Returns the number of online processors.
The result is intended as the number of processes to use all available processors.
This method is implemented using:
sched_getaffinity(): Linux
sysconf(_SC_NPROCESSORS_ONLN): GNU/Linux, NetBSD, FreeBSD, OpenBSD, DragonFly BSD, OpenIndiana, Mac OS X, AIX
Example:
require 'etc' p Etc.nprocessors #=> 4
The result might be smaller number than physical cpus especially when ruby process is bound to specific cpus. This is intended for getting better parallel processing.
Example: (Linux)
linux$ taskset 0x3 ./ruby -retc -e "p Etc.nprocessors" #=> 2
See any remaining errors held in queue.
Any errors you see here are probably due to a bug in Ruby’s OpenSSL implementation.
See Process.getpriority.
Process.setpriority(Process::PRIO_USER, 0, 19) #=> 0 Process.setpriority(Process::PRIO_PROCESS, 0, 19) #=> 0 Process.getpriority(Process::PRIO_USER, 0) #=> 19 Process.getpriority(Process::PRIO_PROCESS, 0) #=> 19
Sets the process title that appears on the ps(1) command. Not necessarily effective on all platforms. No exception will be raised regardless of the result, nor will NotImplementedError be raised even if the platform does not support the feature.
Calling this method does not affect the value of $0.
Process.setproctitle('myapp: worker #%d' % worker_id)
This method first appeared in Ruby 2.1 to serve as a global variable free means to change the process title.
Adds a section with title and content to the parser help view. Used for adding command arguments and default arguments.