Packs port and host as an AF_INET/AF_INET6 sockaddr string.
Socket.sockaddr_in(80, "127.0.0.1") #=> "\x02\x00\x00P\x7F\x00\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00" Socket.sockaddr_in(80, "::1") #=> "\n\x00\x00P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00"
Packs path as an AF_UNIX sockaddr string.
Socket.sockaddr_un("/tmp/sock") #=> "\x01\x00/tmp/sock\x00\x00..."
Returns an Addrinfo object for local address obtained by getsockname.
Note that addrinfo.protocol is filled by 0.
TCPSocket.open("www.ruby-lang.org", 80) {|s| p s.local_address #=> #<Addrinfo: 192.168.0.129:36873 TCP> } TCPServer.open("127.0.0.1", 1512) {|serv| p serv.local_address #=> #<Addrinfo: 127.0.0.1:1512 TCP> }
sendmsg_nonblock sends a message using sendmsg(2) system call in non-blocking manner.
It is similar to BasicSocket#sendmsg but the non-blocking flag is set before the system call and it doesn’t retry the system call.
By specifying a keyword argument exception to false, you can indicate that sendmsg_nonblock should not raise an IO::WaitWritable exception, but return the symbol :wait_writable instead.
Receives up to maxlen bytes from socket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The result, mesg, is the data received.
When recvfrom(2) returns 0, Socket#recv_nonblock returns an empty string as data. The meaning depends on the socket: EOF on TCP, empty packet on UDP, etc.
maxlen - the number of bytes to receive from the socket
flags - zero or more of the MSG_ options
buf - destination String buffer
options - keyword hash, supporting ‘exception: false`
serv = TCPServer.new("127.0.0.1", 0) af, port, host, addr = serv.addr c = TCPSocket.new(addr, port) s = serv.accept c.send "aaa", 0 begin # emulate blocking recv. p s.recv_nonblock(10) #=> "aaa" rescue IO::WaitReadable IO.select([s]) retry end
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recv_nonblock fails.
BasicSocket#recv_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recv_nonblock.
By specifying a keyword argument exception to false, you can indicate that recv_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
recvmsg receives a message using recvmsg(2) system call in non-blocking manner.
It is similar to BasicSocket#recvmsg but non-blocking flag is set before the system call and it doesn’t retry the system call.
By specifying a keyword argument exception to false, you can indicate that recvmsg_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
creates a socket connected to the address of self.
If one or more arguments given as local_addr_args, it is used as the local address of the socket. local_addr_args is given for family_addrinfo to obtain actual address.
If local_addr_args is not given, the local address of the socket is not bound.
The optional last argument opts is options represented by a hash. opts may have following options:
specify the timeout in seconds.
If a block is given, it is called with the socket and the value of the block is returned. The socket is returned otherwise.
Addrinfo.tcp("www.ruby-lang.org", 80).connect_from("0.0.0.0", 4649) {|s| s.print "GET / HTTP/1.0\r\nHost: www.ruby-lang.org\r\n\r\n" puts s.read } # Addrinfo object can be taken for the argument. Addrinfo.tcp("www.ruby-lang.org", 80).connect_from(Addrinfo.tcp("0.0.0.0", 4649)) {|s| s.print "GET / HTTP/1.0\r\nHost: www.ruby-lang.org\r\n\r\n" puts s.read }
returns a string which shows the sockaddr in addrinfo with human-readable form.
Addrinfo.tcp("localhost", 80).inspect_sockaddr #=> "127.0.0.1:80" Addrinfo.tcp("ip6-localhost", 80).inspect_sockaddr #=> "[::1]:80" Addrinfo.unix("/tmp/sock").inspect_sockaddr #=> "/tmp/sock"
Returns true for IPv4 private address (10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16). It returns false otherwise.
Returns true for IPv6 link local address (fe80::/10). It returns false otherwise.
Returns true for IPv6 site local address (fec0::/10). It returns false otherwise.
Accepts an incoming connection using accept(2) after O_NONBLOCK is set for the underlying file descriptor. It returns an accepted TCPSocket for the incoming connection.
require 'socket' serv = TCPServer.new(2202) begin # emulate blocking accept sock = serv.accept_nonblock rescue IO::WaitReadable, Errno::EINTR IO.select([serv]) retry end # sock is an accepted socket.
Refer to Socket#accept for the exceptions that may be thrown if the call to TCPServer#accept_nonblock fails.
TCPServer#accept_nonblock may raise any error corresponding to accept(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK, Errno::EAGAIN, Errno::ECONNABORTED, Errno::EPROTO, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying accept_nonblock.
By specifying a keyword argument exception to false, you can indicate that accept_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Accepts an incoming connection using accept(2) after O_NONBLOCK is set for the underlying file descriptor. It returns an accepted UNIXSocket for the incoming connection.
require 'socket' serv = UNIXServer.new("/tmp/sock") begin # emulate blocking accept sock = serv.accept_nonblock rescue IO::WaitReadable, Errno::EINTR IO.select([serv]) retry end # sock is an accepted socket.
Refer to Socket#accept for the exceptions that may be thrown if the call to UNIXServer#accept_nonblock fails.
UNIXServer#accept_nonblock may raise any error corresponding to accept(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK, Errno::EAGAIN, Errno::ECONNABORTED or Errno::EPROTO, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying accept_nonblock.
By specifying a keyword argument exception to false, you can indicate that accept_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Returns the pre-match
(in the regular expression sense) of the last scan.s = StringScanner.new('test string') s.scan(/\w+/) # -> "test" s.scan(/\s+/) # -> " " s.pre_match # -> "test" s.post_match # -> "string"
Reads at most maxlen bytes from the ARGF stream in non-blocking mode.
Returns the encoded row separator; used for parsing and writing; see {Option row_sep}:
CSV.new('').row_sep # => "\n"
Returns true if the next row to be read is a header row; false otherwise.
Without headers:
string = "foo,0\nbar,1\nbaz,2\n" csv = CSV.new(string) csv.header_row? # => false
With headers:
string = "Name,Value\nfoo,0\nbar,1\nbaz,2\n" csv = CSV.new(string, headers: true) csv.header_row? # => true csv.shift # => #<CSV::Row "Name":"foo" "Value":"0"> csv.header_row? # => false
Raises an exception if the source is not opened for reading:
string = "foo,0\nbar,1\nbaz,2\n" csv = CSV.new(string) csv.close # Raises IOError (not opened for reading) csv.header_row?
Allow connections from Socket soc?
Set an error (a protected method).
Return the appropriate error message in POSIX-defined format. If no error has occurred, returns nil.
Returns true if the ipaddr is a link-local address. IPv4 addresses in 169.254.0.0/16 reserved by RFC 3927 and Link-Local IPv6 Unicast Addresses in fe80::/10 reserved by RFC 4291 are considered link-local.
Returns the names of the binding’s local variables as symbols.
def foo a = 1 2.times do |n| binding.local_variables #=> [:a, :n] end end
This method is the short version of the following code:
binding.eval("local_variables")
Returns the Ruby source filename and line number of the binding object.
Returns the substring of the target string from its beginning up to the first match in self (that is, self[0]); equivalent to regexp global variable $`:
m = /(.)(.)(\d+)(\d)/.match("THX1138.") # => #<MatchData "HX1138" 1:"H" 2:"X" 3:"113" 4:"8"> m[0] # => "HX1138" m.pre_match # => "T"
Related: MatchData#post_match.