Removes a file or directory, using File.unlink if self is a file, or Dir.unlink as necessary.
Return line number of current parsing line. This number starts from 1.
Listens for connections, using the specified int as the backlog. A call to listen only applies if the socket is of type SOCK_STREAM or SOCK_SEQPACKET.
backlog - the maximum length of the queue for pending connections.
require 'socket' include Socket::Constants socket = Socket.new( AF_INET, SOCK_STREAM, 0 ) sockaddr = Socket.pack_sockaddr_in( 2200, 'localhost' ) socket.bind( sockaddr ) socket.listen( 5 )
require 'socket' include Socket::Constants socket = Socket.new( AF_INET, SOCK_STREAM, 0 ) socket.listen( 1 )
On unix based systems the above will work because a new sockaddr struct is created on the address ADDR_ANY, for an arbitrary port number as handed off by the kernel. It will not work on Windows, because Windows requires that the socket is bound by calling bind before it can listen.
If the backlog amount exceeds the implementation-dependent maximum queue length, the implementation’s maximum queue length will be used.
On unix-based based systems the following system exceptions may be raised if the call to listen fails:
Errno::EBADF - the socket argument is not a valid file descriptor
Errno::EDESTADDRREQ - the socket is not bound to a local address, and the protocol does not support listening on an unbound socket
Errno::EINVAL - the socket is already connected
Errno::ENOTSOCK - the socket argument does not refer to a socket
Errno::EOPNOTSUPP - the socket protocol does not support listen
Errno::EACCES - the calling process does not have appropriate privileges
Errno::EINVAL - the socket has been shut down
Errno::ENOBUFS - insufficient resources are available in the system to complete the call
On Windows systems the following system exceptions may be raised if the call to listen fails:
Errno::ENETDOWN - the network is down
Errno::EADDRINUSE - the socket’s local address is already in use. This usually occurs during the execution of bind but could be delayed if the call to bind was to a partially wildcard address (involving ADDR_ANY) and if a specific address needs to be committed at the time of the call to listen
Errno::EINPROGRESS - a Windows Sockets 1.1 call is in progress or the service provider is still processing a callback function
Errno::EINVAL - the socket has not been bound with a call to bind.
Errno::EISCONN - the socket is already connected
Errno::EMFILE - no more socket descriptors are available
Errno::ENOBUFS - no buffer space is available
Errno::ENOTSOC - socket is not a socket
Errno::EOPNOTSUPP - the referenced socket is not a type that supports the listen method
listen manual pages on unix-based systems
listen function in Microsoft’s Winsock functions reference
Accepts a next connection. Returns a new Socket object and Addrinfo object.
serv = Socket.new(:INET, :STREAM, 0) serv.listen(5) c = Socket.new(:INET, :STREAM, 0) c.connect(serv.connect_address) p serv.accept #=> [#<Socket:fd 6>, #<Addrinfo: 127.0.0.1:48555 TCP>]
Accepts an incoming connection returning an array containing the (integer) file descriptor for the incoming connection, client_socket_fd, and an Addrinfo, client_addrinfo.
# In one script, start this first require 'socket' include Socket::Constants socket = Socket.new( AF_INET, SOCK_STREAM, 0 ) sockaddr = Socket.pack_sockaddr_in( 2200, 'localhost' ) socket.bind( sockaddr ) socket.listen( 5 ) client_fd, client_addrinfo = socket.sysaccept client_socket = Socket.for_fd( client_fd ) puts "The client said, '#{client_socket.readline.chomp}'" client_socket.puts "Hello from script one!" socket.close # In another script, start this second require 'socket' include Socket::Constants socket = Socket.new( AF_INET, SOCK_STREAM, 0 ) sockaddr = Socket.pack_sockaddr_in( 2200, 'localhost' ) socket.connect( sockaddr ) socket.puts "Hello from script 2." puts "The server said, '#{socket.readline.chomp}'" socket.close
Refer to Socket#accept for the exceptions that may be thrown if the call to sysaccept fails.
creates a listening socket bound to self.
Accepts an incoming connection. It returns a new TCPSocket object.
TCPServer.open("127.0.0.1", 14641) {|serv| s = serv.accept s.puts Time.now s.close }
Returns a file descriptor of a accepted connection.
TCPServer.open("127.0.0.1", 28561) {|serv| fd = serv.sysaccept s = IO.for_fd(fd) s.puts Time.now s.close }
Listens for connections, using the specified int as the backlog. A call to listen only applies if the socket is of type SOCK_STREAM or SOCK_SEQPACKET.
backlog - the maximum length of the queue for pending connections.
require 'socket' include Socket::Constants socket = Socket.new( AF_INET, SOCK_STREAM, 0 ) sockaddr = Socket.pack_sockaddr_in( 2200, 'localhost' ) socket.bind( sockaddr ) socket.listen( 5 )
require 'socket' include Socket::Constants socket = Socket.new( AF_INET, SOCK_STREAM, 0 ) socket.listen( 1 )
On unix based systems the above will work because a new sockaddr struct is created on the address ADDR_ANY, for an arbitrary port number as handed off by the kernel. It will not work on Windows, because Windows requires that the socket is bound by calling bind before it can listen.
If the backlog amount exceeds the implementation-dependent maximum queue length, the implementation’s maximum queue length will be used.
On unix-based based systems the following system exceptions may be raised if the call to listen fails:
Errno::EBADF - the socket argument is not a valid file descriptor
Errno::EDESTADDRREQ - the socket is not bound to a local address, and the protocol does not support listening on an unbound socket
Errno::EINVAL - the socket is already connected
Errno::ENOTSOCK - the socket argument does not refer to a socket
Errno::EOPNOTSUPP - the socket protocol does not support listen
Errno::EACCES - the calling process does not have appropriate privileges
Errno::EINVAL - the socket has been shut down
Errno::ENOBUFS - insufficient resources are available in the system to complete the call
On Windows systems the following system exceptions may be raised if the call to listen fails:
Errno::ENETDOWN - the network is down
Errno::EADDRINUSE - the socket’s local address is already in use. This usually occurs during the execution of bind but could be delayed if the call to bind was to a partially wildcard address (involving ADDR_ANY) and if a specific address needs to be committed at the time of the call to listen
Errno::EINPROGRESS - a Windows Sockets 1.1 call is in progress or the service provider is still processing a callback function
Errno::EINVAL - the socket has not been bound with a call to bind.
Errno::EISCONN - the socket is already connected
Errno::EMFILE - no more socket descriptors are available
Errno::ENOBUFS - no buffer space is available
Errno::ENOTSOC - socket is not a socket
Errno::EOPNOTSUPP - the referenced socket is not a type that supports the listen method
listen manual pages on unix-based systems
listen function in Microsoft’s Winsock functions reference
Accepts an incoming connection. It returns a new UNIXSocket object.
UNIXServer.open("/tmp/sock") {|serv| UNIXSocket.open("/tmp/sock") {|c| s = serv.accept s.puts "hi" s.close p c.read #=> "hi\n" } }
Accepts a new connection. It returns the new file descriptor which is an integer.
UNIXServer.open("/tmp/sock") {|serv| UNIXSocket.open("/tmp/sock") {|c| fd = serv.sysaccept s = IO.new(fd) s.puts "hi" s.close p c.read #=> "hi\n" } }
Listens for connections, using the specified int as the backlog. A call to listen only applies if the socket is of type SOCK_STREAM or SOCK_SEQPACKET.
backlog - the maximum length of the queue for pending connections.
require 'socket' include Socket::Constants socket = Socket.new( AF_INET, SOCK_STREAM, 0 ) sockaddr = Socket.pack_sockaddr_in( 2200, 'localhost' ) socket.bind( sockaddr ) socket.listen( 5 )
require 'socket' include Socket::Constants socket = Socket.new( AF_INET, SOCK_STREAM, 0 ) socket.listen( 1 )
On unix based systems the above will work because a new sockaddr struct is created on the address ADDR_ANY, for an arbitrary port number as handed off by the kernel. It will not work on Windows, because Windows requires that the socket is bound by calling bind before it can listen.
If the backlog amount exceeds the implementation-dependent maximum queue length, the implementation’s maximum queue length will be used.
On unix-based based systems the following system exceptions may be raised if the call to listen fails:
Errno::EBADF - the socket argument is not a valid file descriptor
Errno::EDESTADDRREQ - the socket is not bound to a local address, and the protocol does not support listening on an unbound socket
Errno::EINVAL - the socket is already connected
Errno::ENOTSOCK - the socket argument does not refer to a socket
Errno::EOPNOTSUPP - the socket protocol does not support listen
Errno::EACCES - the calling process does not have appropriate privileges
Errno::EINVAL - the socket has been shut down
Errno::ENOBUFS - insufficient resources are available in the system to complete the call
On Windows systems the following system exceptions may be raised if the call to listen fails:
Errno::ENETDOWN - the network is down
Errno::EADDRINUSE - the socket’s local address is already in use. This usually occurs during the execution of bind but could be delayed if the call to bind was to a partially wildcard address (involving ADDR_ANY) and if a specific address needs to be committed at the time of the call to listen
Errno::EINPROGRESS - a Windows Sockets 1.1 call is in progress or the service provider is still processing a callback function
Errno::EINVAL - the socket has not been bound with a call to bind.
Errno::EISCONN - the socket is already connected
Errno::EMFILE - no more socket descriptors are available
Errno::ENOBUFS - no buffer space is available
Errno::ENOTSOC - socket is not a socket
Errno::EOPNOTSUPP - the referenced socket is not a type that supports the listen method
listen manual pages on unix-based systems
listen function in Microsoft’s Winsock functions reference
Returns the current line number in self; see Line Number.
Sets the current line number in self to the given new_line_number; see Line Number.
Returns a new Hash excluding entries for the given keys:
h = { a: 100, b: 200, c: 300 } h.except(:a) #=> {:b=>200, :c=>300}
Any given keys that are not found are ignored.
Replaces the entire contents of self with the contents of other_hash; returns self:
h = {foo: 0, bar: 1, baz: 2} h.replace({bat: 3, bam: 4}) # => {:bat=>3, :bam=>4}
Returns a hash except the given keys from ENV and their values.
ENV #=> {"LANG"=>"en_US.UTF-8", "TERM"=>"xterm-256color", "HOME"=>"/Users/rhc"} ENV.except("TERM","HOME") #=> {"LANG"=>"en_US.UTF-8"}
Replaces the entire content of the environment variables with the name/value pairs in the given hash; returns ENV.
Replaces the content of ENV with the given pairs:
ENV.replace('foo' => '0', 'bar' => '1') # => ENV ENV.to_hash # => {"bar"=>"1", "foo"=>"0"}
Raises an exception if a name or value is invalid (see Invalid Names and Values):
ENV.replace('foo' => '0', :bar => '1') # Raises TypeError (no implicit conversion of Symbol into String) ENV.replace('foo' => '0', 'bar' => 1) # Raises TypeError (no implicit conversion of Integer into String) ENV.to_hash # => {"bar"=>"1", "foo"=>"0"}
Reads each file in ARGF in its entirety, returning an Array containing lines from the files. Lines are assumed to be separated by sep.
lines = ARGF.readlines lines[0] #=> "This is line one\n"
Returns the next line from the current file in ARGF.
By default lines are assumed to be separated by $/; to use a different character as a separator, supply it as a String for the sep argument.
The optional limit argument specifies how many characters of each line to return. By default all characters are returned.
An EOFError is raised at the end of the file.