Returns the bound receiver of the binding object.
Directs to accept specified class t. The argument string is passed to the block in which it should be converted to the desired class.
tArgument class specifier, any object including Class.
patPattern for argument, defaults to t if it responds to match.
accept(t, pat, &block)
Unlinks (deletes) the file from the filesystem. One should always unlink the file after using it, as is explained in the “Explicit close” good practice section in the Tempfile overview:
file = Tempfile.new('foo') begin # ...do something with file... ensure file.close file.unlink # deletes the temp file end
On POSIX systems it’s possible to unlink a file before closing it. This practice is explained in detail in the Tempfile overview (section “Unlink after creation”); please refer there for more information.
However, unlink-before-close may not be supported on non-POSIX operating systems. Microsoft Windows is the most notable case: unlinking a non-closed file will result in an error, which this method will silently ignore. If you want to practice unlink-before-close whenever possible, then you should write code like this:
file = Tempfile.new('foo') file.unlink # On Windows this silently fails. begin # ... do something with file ... ensure file.close! # Closes the file handle. If the file wasn't unlinked # because #unlink failed, then this method will attempt # to do so again. end
Returns the bound receiver of the method object.
(1..3).method(:map).receiver # => 1..3
Receive an incoming message from the current Ractor’s incoming port’s queue, which was sent there by send.
r = Ractor.new do v1 = Ractor.receive puts "Received: #{v1}" end r.send('message1') r.take # Here will be printed: "Received: message1"
Alternatively, private instance method receive may be used:
r = Ractor.new do v1 = receive puts "Received: #{v1}" end r.send('message1') r.take # Here will be printed: "Received: message1"
The method blocks if the queue is empty.
r = Ractor.new do puts "Before first receive" v1 = Ractor.receive puts "Received: #{v1}" v2 = Ractor.receive puts "Received: #{v2}" end wait puts "Still not received" r.send('message1') wait puts "Still received only one" r.send('message2') r.take
Output:
Before first receive Still not received Received: message1 Still received only one Received: message2
If close_incoming was called on the ractor, the method raises Ractor::ClosedError if there are no more messages in incoming queue:
Ractor.new do close_incoming receive end wait # in `receive': The incoming port is already closed => #<Ractor:#2 test.rb:1 running> (Ractor::ClosedError)
same as Ractor.receive
Returns an array of all existing Thread objects that belong to this group.
ThreadGroup::Default.list #=> [#<Thread:0x401bdf4c run>]
Returns an array of Thread objects for all threads that are either runnable or stopped.
Thread.new { sleep(200) } Thread.new { 1000000.times {|i| i*i } } Thread.new { Thread.stop } Thread.list.each {|t| p t}
This will produce:
#<Thread:0x401b3e84 sleep> #<Thread:0x401b3f38 run> #<Thread:0x401b3fb0 sleep> #<Thread:0x401bdf4c run>
Returns true if thr is running or sleeping.
thr = Thread.new { } thr.join #=> #<Thread:0x401b3fb0 dead> Thread.current.alive? #=> true thr.alive? #=> false
Returns the current backtrace of the target thread.
A convenience method for TracePoint.new, that activates the trace automatically.
trace = TracePoint.trace(:call) { |tp| [tp.lineno, tp.event] } #=> #<TracePoint:enabled> trace.enabled? #=> true
Line number of the event
Equivalent to Kernel::gets, except readline raises EOFError at end of file.
Returns an array containing the lines returned by calling Kernel.gets(sep) until the end of file.
Suspends the current thread for duration seconds (which may be any number, including a Float with fractional seconds). Returns the actual number of seconds slept (rounded), which may be less than that asked for if another thread calls Thread#run. Called without an argument, sleep() will sleep forever.
Time.new #=> 2008-03-08 19:56:19 +0900 sleep 1.2 #=> 1 Time.new #=> 2008-03-08 19:56:20 +0900 sleep 1.9 #=> 2 Time.new #=> 2008-03-08 19:56:22 +0900
Returns an object formed from operands via either:
A method named by symbol.
A block to which each operand is passed.
With method-name argument symbol, combines operands using the method:
# Sum, without initial_operand. (1..4).inject(:+) # => 10 # Sum, with initial_operand. (1..4).inject(10, :+) # => 20
With a block, passes each operand to the block:
# Sum of squares, without initial_operand. (1..4).inject {|sum, n| sum + n*n } # => 30 # Sum of squares, with initial_operand. (1..4).inject(2) {|sum, n| sum + n*n } # => 32
Operands
If argument initial_operand is not given, the operands for inject are simply the elements of self. Example calls and their operands:
(1..4).inject(:+)[1, 2, 3, 4].
(1...4).inject(:+)[1, 2, 3].
('a'..'d').inject(:+)['a', 'b', 'c', 'd'].
('a'...'d').inject(:+)['a', 'b', 'c'].
Examples with first operand (which is self.first) of various types:
# Integer. (1..4).inject(:+) # => 10 # Float. [1.0, 2, 3, 4].inject(:+) # => 10.0 # Character. ('a'..'d').inject(:+) # => "abcd" # Complex. [Complex(1, 2), 3, 4].inject(:+) # => (8+2i)
If argument initial_operand is given, the operands for inject are that value plus the elements of self. Example calls their operands:
(1..4).inject(10, :+)[10, 1, 2, 3, 4].
(1...4).inject(10, :+)[10, 1, 2, 3].
('a'..'d').inject('e', :+)['e', 'a', 'b', 'c', 'd'].
('a'...'d').inject('e', :+)['e', 'a', 'b', 'c'].
Examples with initial_operand of various types:
# Integer. (1..4).inject(2, :+) # => 12 # Float. (1..4).inject(2.0, :+) # => 12.0 # String. ('a'..'d').inject('foo', :+) # => "fooabcd" # Array. %w[a b c].inject(['x'], :push) # => ["x", "a", "b", "c"] # Complex. (1..4).inject(Complex(2, 2), :+) # => (12+2i)
Combination by Given Method
If the method-name argument symbol is given, the operands are combined by that method:
The first and second operands are combined.
That result is combined with the third operand.
That result is combined with the fourth operand.
And so on.
The return value from inject is the result of the last combination.
This call to inject computes the sum of the operands:
(1..4).inject(:+) # => 10
Examples with various methods:
# Integer addition. (1..4).inject(:+) # => 10 # Integer multiplication. (1..4).inject(:*) # => 24 # Character range concatenation. ('a'..'d').inject('', :+) # => "abcd" # String array concatenation. %w[foo bar baz].inject('', :+) # => "foobarbaz" # Hash update. h = [{foo: 0, bar: 1}, {baz: 2}, {bat: 3}].inject(:update) h # => {:foo=>0, :bar=>1, :baz=>2, :bat=>3} # Hash conversion to nested arrays. h = {foo: 0, bar: 1}.inject([], :push) h # => [[:foo, 0], [:bar, 1]]
Combination by Given Block
If a block is given, the operands are passed to the block:
The first call passes the first and second operands.
The second call passes the result of the first call, along with the third operand.
The third call passes the result of the second call, along with the fourth operand.
And so on.
The return value from inject is the return value from the last block call.
This call to inject gives a block that writes the memo and element, and also sums the elements:
(1..4).inject do |memo, element| p "Memo: #{memo}; element: #{element}" memo + element end # => 10
Output:
"Memo: 1; element: 2" "Memo: 3; element: 3" "Memo: 6; element: 4"
Enumerable#reduce is an alias for Enumerable#inject.
Returns the number of online processors.
The result is intended as the number of processes to use all available processors.
This method is implemented using:
sched_getaffinity(): Linux
sysconf(_SC_NPROCESSORS_ONLN): GNU/Linux, NetBSD, FreeBSD, OpenBSD, DragonFly BSD, OpenIndiana, Mac OS X, AIX
Example:
require 'etc' p Etc.nprocessors #=> 4
The result might be smaller number than physical cpus especially when ruby process is bound to specific cpus. This is intended for getting better parallel processing.
Example: (Linux)
linux$ taskset 0x3 ./ruby -retc -e "p Etc.nprocessors" #=> 2
Encodes string using String.encode.
Shows the prompt and reads the inputted line with line editing. The inputted line is added to the history if add_hist is true.
Returns nil when the inputted line is empty and user inputs EOF (Presses ^D on UNIX).
Raises IOError exception if one of below conditions are satisfied.
stdin was closed.
stdout was closed.
This method supports thread. Switches the thread context when waits inputting line.
Supports line edit when inputs line. Provides VI and Emacs editing mode. Default is Emacs editing mode.
NOTE: Terminates ruby interpreter and does not return the terminal status after user pressed ‘^C’ when wait inputting line. Give 3 examples that avoid it.
Catches the Interrupt exception by pressed ^C after returns terminal status:
require "readline"
stty_save = `stty -g`.chomp
begin
while buf = Readline.readline
p buf
end
rescue Interrupt
system("stty", stty_save)
exit
end
end
end
Catches the INT signal by pressed ^C after returns terminal status:
require "readline" stty_save = `stty -g`.chomp trap("INT") { system "stty", stty_save; exit } while buf = Readline.readline p buf end
Ignores pressing ^C:
require "readline" trap("INT", "SIG_IGN") while buf = Readline.readline p buf end
Can make as follows with Readline::HISTORY constant. It does not record to the history if the inputted line is empty or the same it as last one.
require "readline" while buf = Readline.readline("> ", true) # p Readline::HISTORY.to_a Readline::HISTORY.pop if /^\s*$/ =~ buf begin if Readline::HISTORY[Readline::HISTORY.length-2] == buf Readline::HISTORY.pop end rescue IndexError end # p Readline::HISTORY.to_a print "-> ", buf, "\n" end
Returns the facility number used in the last call to open()
Returns self, for backward compatibility.
Returns true if the named file is a symbolic link.