Returns the Symbol corresponding to str, creating the symbol if it did not previously exist. See Symbol#id2name.
"Koala".intern #=> :Koala s = 'cat'.to_sym #=> :cat s == :cat #=> true s = '@cat'.to_sym #=> :@cat s == :@cat #=> true
This can also be used to create symbols that cannot be represented using the :xxx notation.
'cat and dog'.to_sym #=> :"cat and dog"
Centers str in width. If width is greater than the length of str, returns a new String of length width with str centered and padded with padstr; otherwise, returns str.
"hello".center(4) #=> "hello" "hello".center(20) #=> " hello " "hello".center(20, '123') #=> "1231231hello12312312"
Returns a new String with the last character removed. If the string ends with \r\n, both characters are removed. Applying chop to an empty string returns an empty string. String#chomp is often a safer alternative, as it leaves the string unchanged if it doesn’t end in a record separator.
"string\r\n".chop #=> "string" "string\n\r".chop #=> "string\n" "string\n".chop #=> "string" "string".chop #=> "strin" "x".chop.chop #=> ""
Returns a copy of the receiver with trailing whitespace removed. See also String#lstrip and String#strip.
Refer to String#strip for the definition of whitespace.
" hello ".rstrip #=> " hello" "hello".rstrip #=> "hello"
Processes str as for String#chop, returning str, or nil if str is the empty string. See also String#chomp!.
Removes trailing whitespace from the receiver. Returns the altered receiver, or nil if no change was made. See also String#lstrip! and String#strip!.
Refer to String#strip for the definition of whitespace.
" hello ".rstrip! #=> " hello" " hello".rstrip! #=> nil "hello".rstrip! #=> nil
Returns 0 if the value is positive, pi otherwise.
Returns 0 if the value is positive, pi otherwise.
Returns an array with both numeric and float represented as Float objects.
This is achieved by converting numeric to a Float.
1.2.coerce(3) #=> [3.0, 1.2] 2.5.coerce(1.1) #=> [1.1, 2.5]
Returns true if float is 0.0.
Returns true if float is greater than 0.
Returns true if float is less than 0.
Returns the numerator. The result is machine dependent.
n = 0.3.numerator #=> 5404319552844595 d = 0.3.denominator #=> 18014398509481984 n.fdiv(d) #=> 0.3
See also Float#denominator.
Raises an exception in the fiber at the point at which the last Fiber.yield was called. If the fiber has not been started or has already run to completion, raises FiberError. If the fiber is yielding, it is resumed. If it is transferring, it is transferred into. But if it is resuming, raises FiberError.
With no arguments, raises a RuntimeError. With a single String argument, raises a RuntimeError with the string as a message. Otherwise, the first parameter should be the name of an Exception class (or an object that returns an Exception object when sent an exception message). The optional second parameter sets the message associated with the exception, and the third parameter is an array of callback information. Exceptions are caught by the rescue clause of begin...end blocks.
Fiber scheduler, set in the current thread with Fiber.set_scheduler. If the scheduler is nil (which is the default), non-blocking fibers behavior is the same as blocking. (see “Non-blocking fibers” section in class docs for details about the scheduler concept).
Transfer control to another fiber, resuming it from where it last stopped or starting it if it was not resumed before. The calling fiber will be suspended much like in a call to Fiber.yield. You need to require 'fiber' before using this method.
The fiber which receives the transfer call is treats it much like a resume call. Arguments passed to transfer are treated like those passed to resume.
The two style of control passing to and from fiber (one is resume and Fiber::yield, another is transfer to and from fiber) can’t be freely mixed.
If the Fiber’s lifecycle had started with transfer, it will never be able to yield or be resumed control passing, only finish or transfer back. (It still can resume other fibers that are allowed to be resumed.)
If the Fiber’s lifecycle had started with resume, it can yield or transfer to another Fiber, but can receive control back only the way compatible with the way it was given away: if it had transferred, it only can be transferred back, and if it had yielded, it only can be resumed back. After that, it again can transfer or yield.
If those rules are broken FiberError is raised.
For an individual Fiber design, yield/resume is more easy to use style (the Fiber just gives away control, it doesn’t need to think about who the control is given to), while transfer is more flexible for complex cases, allowing to build arbitrary graphs of Fibers dependent on each other.
Example:
require 'fiber' manager = nil # For local var to be visible inside worker block # This fiber would be started with transfer # It can't yield, and can't be resumed worker = Fiber.new { |work| puts "Worker: starts" puts "Worker: Performed #{work.inspect}, transferring back" # Fiber.yield # this would raise FiberError: attempt to yield on a not resumed fiber # manager.resume # this would raise FiberError: attempt to resume a resumed fiber (double resume) manager.transfer(work.capitalize) } # This fiber would be started with resume # It can yield or transfer, and can be transferred # back or resumed manager = Fiber.new { puts "Manager: starts" puts "Manager: transferring 'something' to worker" result = worker.transfer('something') puts "Manager: worker returned #{result.inspect}" # worker.resume # this would raise FiberError: attempt to resume a transferring fiber Fiber.yield # this is OK, the fiber transferred from and to, now it can yield puts "Manager: finished" } puts "Starting the manager" manager.resume puts "Resuming the manager" # manager.transfer # this would raise FiberError: attempt to transfer to a yielding fiber manager.resume
produces
Starting the manager Manager: starts Manager: transferring 'something' to worker Worker: starts Worker: Performed "something", transferring back Manager: worker returned "Something" Resuming the manager Manager: finished
Seeks to a particular location in dir. integer must be a value returned by Dir#tell.
d = Dir.new("testdir") #=> #<Dir:0x401b3c40> d.read #=> "." i = d.tell #=> 12 d.read #=> ".." d.seek(i) #=> #<Dir:0x401b3c40> d.read #=> ".."
Closes the directory stream. Calling this method on closed Dir object is ignored since Ruby 2.3.
d = Dir.new("testdir") d.close #=> nil
Returns true if the named file is an empty directory, false if it is not a directory or non-empty.
Dir.open( string ) -> aDir
Dir.open( string, encoding: enc ) -> aDir
Dir.open( string ) {| aDir | block } -> anObject
Dir.open( string, encoding: enc ) {| aDir | block } -> anObject
The optional encoding keyword argument specifies the encoding of the directory. If not specified, the filesystem encoding is used.
With no block, open is a synonym for Dir::new. If a block is present, it is passed aDir as a parameter. The directory is closed at the end of the block, and Dir::open returns the value of the block.
Returns the last access time for the named file as a Time object.
file_name can be an IO object.
File.atime("testfile") #=> Wed Apr 09 08:51:48 CDT 2003
Returns the modification time for the named file as a Time object.
file_name can be an IO object.
File.mtime("testfile") #=> Tue Apr 08 12:58:04 CDT 2003
Returns the change time for the named file (the time at which directory information about the file was changed, not the file itself).
file_name can be an IO object.
Note that on Windows (NTFS), returns creation time (birth time).
File.ctime("testfile") #=> Wed Apr 09 08:53:13 CDT 2003