Returns pathname configuration variable using fpathconf().
name should be a constant under Etc which begins with PC_.
The return value is an integer or nil. nil means indefinite limit. (fpathconf() returns -1 but errno is not set.)
require 'etc' IO.pipe {|r, w| p w.pathconf(Etc::PC_PIPE_BUF) #=> 4096 }
Flushes input and output buffers in kernel.
You must require ‘io/console’ to use this method.
Returns true if an IO object is in non-blocking mode.
Enables non-blocking mode on a stream when set to true, and blocking mode when set to false.
Yields self in non-blocking mode.
When false is given as an argument, self is yielded in blocking mode. The original mode is restored after the block is executed.
Reads from the IO until the given pattern matches or the timeout is over.
It returns an array with the read buffer, followed by the matches. If a block is given, the result is yielded to the block and returns nil.
When called without a block, it waits until the input that matches the given pattern is obtained from the IO or the time specified as the timeout passes. An array is returned when the pattern is obtained from the IO. The first element of the array is the entire string obtained from the IO until the pattern matches, followed by elements indicating which the pattern which matched to the anchor in the regular expression.
The optional timeout parameter defines, in seconds, the total time to wait for the pattern. If the timeout expires or eof is found, nil is returned or yielded. However, the buffer in a timeout session is kept for the next expect call. The default timeout is 9999999 seconds.
Immediately writes all buffered data in ios to disk. Note that fsync differs from using IO#sync=. The latter ensures that data is flushed from Ruby’s buffers, but does not guarantee that the underlying operating system actually writes it to disk.
NotImplementedError is raised if the underlying operating system does not support fsync(2).
Immediately writes all buffered data in ios to disk.
If the underlying operating system does not support fdatasync(2), IO#fsync is called instead (which might raise a NotImplementedError).
Returns the current “sync mode” of ios. When sync mode is true, all output is immediately flushed to the underlying operating system and is not buffered by Ruby internally. See also IO#fsync.
f = File.new("testfile") f.sync #=> false
Sets the “sync mode” to true or false. When sync mode is true, all output is immediately flushed to the underlying operating system and is not buffered internally. Returns the new state. See also IO#fsync.
f = File.new("testfile") f.sync = true
Reads at most maxlen bytes from the I/O stream. It blocks only if ios has no data immediately available. It doesn’t block if some data available.
If the optional outbuf argument is present, it must reference a String, which will receive the data. The outbuf will contain only the received data after the method call even if it is not empty at the beginning.
It raises EOFError on end of file.
readpartial is designed for streams such as pipe, socket, tty, etc. It blocks only when no data immediately available. This means that it blocks only when following all conditions hold.
the byte buffer in the IO object is empty.
the content of the stream is empty.
the stream is not reached to EOF.
When readpartial blocks, it waits data or EOF on the stream. If some data is reached, readpartial returns with the data. If EOF is reached, readpartial raises EOFError.
When readpartial doesn’t blocks, it returns or raises immediately. If the byte buffer is not empty, it returns the data in the buffer. Otherwise if the stream has some content, it returns the data in the stream. Otherwise if the stream is reached to EOF, it raises EOFError.
r, w = IO.pipe # buffer pipe content w << "abc" # "" "abc". r.readpartial(4096) #=> "abc" "" "" r.readpartial(4096) # blocks because buffer and pipe is empty. r, w = IO.pipe # buffer pipe content w << "abc" # "" "abc" w.close # "" "abc" EOF r.readpartial(4096) #=> "abc" "" EOF r.readpartial(4096) # raises EOFError r, w = IO.pipe # buffer pipe content w << "abc\ndef\n" # "" "abc\ndef\n" r.gets #=> "abc\n" "def\n" "" w << "ghi\n" # "def\n" "ghi\n" r.readpartial(4096) #=> "def\n" "" "ghi\n" r.readpartial(4096) #=> "ghi\n" "" ""
Note that readpartial behaves similar to sysread. The differences are:
If the byte buffer is not empty, read from the byte buffer instead of “sysread for buffered IO (IOError)”.
It doesn’t cause Errno::EWOULDBLOCK and Errno::EINTR. When readpartial meets EWOULDBLOCK and EINTR by read system call, readpartial retry the system call.
The latter means that readpartial is nonblocking-flag insensitive. It blocks on the situation IO#sysread causes Errno::EWOULDBLOCK as if the fd is blocking mode.
Pushes back bytes (passed as a parameter) onto ios, such that a subsequent buffered read will return it. Only one byte may be pushed back before a subsequent read operation (that is, you will be able to read only the last of several bytes that have been pushed back). Has no effect with unbuffered reads (such as IO#sysread).
f = File.new("testfile") #=> #<File:testfile> b = f.getbyte #=> 0x38 f.ungetbyte(b) #=> nil f.getbyte #=> 0x38
Pushes back one character (passed as a parameter) onto ios, such that a subsequent buffered character read will return it. Only one character may be pushed back before a subsequent read operation (that is, you will be able to read only the last of several characters that have been pushed back). Has no effect with unbuffered reads (such as IO#sysread).
f = File.new("testfile") #=> #<File:testfile> c = f.getc #=> "8" f.ungetc(c) #=> nil f.getc #=> "8"
Return a string describing this IO object.
Deletes every key-value pair from gdbm for which block evaluates to true.
Returns a hash copy of gdbm where all key-value pairs from gdbm for which block evaluates to true are removed. See also: delete_if
Unless the gdbm object has been opened with the SYNC flag, it is not guaranteed that database modification operations are immediately applied to the database file. This method ensures that all recent modifications to the database are written to the file. Blocks until all writing operations to the disk have been finished.
Returns true if the given key k exists within the database. Returns false otherwise.
Returns a string containing a detailed summary of the keys and values.
Convert this range object to a printable form (using inspect to convert the begin and end objects).
Returns true if obj is an element of the range, false otherwise.
("a".."z").include?("g") #=> true ("a".."z").include?("A") #=> false ("a".."z").include?("cc") #=> false
If you need to ensure obj is between begin and end, use cover?
("a".."z").cover?("cc") #=> true
If begin and end are numeric, include? behaves like cover?
(1..3).include?(1.5) # => true
Identical to Enumerable#count, except it returns Infinity for endless ranges.
Produce a nicely formatted string-version of rxp. Perhaps surprisingly, #inspect actually produces the more natural version of the string than #to_s.
/ab+c/ix.inspect #=> "/ab+c/ix"
Returns true if the set contains the given object.
Note that include? and member? do not test member equality using == as do other Enumerables.
See also Enumerable#include?
Returns true if the set and the given set have at least one element in common.
Set[1, 2, 3].intersect? Set[4, 5] #=> false Set[1, 2, 3].intersect? Set[3, 4] #=> true