Returns an Addrinfo object for local address obtained by getsockname.
Note that addrinfo.protocol is filled by 0.
TCPSocket.open("www.ruby-lang.org", 80) {|s| p s.local_address #=> #<Addrinfo: 192.168.0.129:36873 TCP> } TCPServer.open("127.0.0.1", 1512) {|serv| p serv.local_address #=> #<Addrinfo: 127.0.0.1:1512 TCP> }
sendmsg_nonblock sends a message using sendmsg(2) system call in non-blocking manner.
It is similar to BasicSocket#sendmsg but the non-blocking flag is set before the system call and it doesn’t retry the system call.
By specifying a keyword argument exception to false, you can indicate that sendmsg_nonblock should not raise an IO::WaitWritable exception, but return the symbol :wait_writable instead.
Receives up to maxlen bytes from socket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The result, mesg, is the data received.
When recvfrom(2) returns 0, Socket#recv_nonblock returns an empty string as data. The meaning depends on the socket: EOF on TCP, empty packet on UDP, etc.
maxlen - the number of bytes to receive from the socket
flags - zero or more of the MSG_ options
buf - destination String buffer
options - keyword hash, supporting ‘exception: false`
serv = TCPServer.new("127.0.0.1", 0) af, port, host, addr = serv.addr c = TCPSocket.new(addr, port) s = serv.accept c.send "aaa", 0 begin # emulate blocking recv. p s.recv_nonblock(10) #=> "aaa" rescue IO::WaitReadable IO.select([s]) retry end
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recv_nonblock fails.
BasicSocket#recv_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recv_nonblock.
By specifying a keyword argument exception to false, you can indicate that recv_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
recvmsg receives a message using recvmsg(2) system call in non-blocking manner.
It is similar to BasicSocket#recvmsg but non-blocking flag is set before the system call and it doesn’t retry the system call.
By specifying a keyword argument exception to false, you can indicate that recvmsg_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
creates a new Socket connected to the address of local_addrinfo.
If local_addrinfo is nil, the address of the socket is not bound.
The timeout specify the seconds for timeout. Errno::ETIMEDOUT is raised when timeout occur.
If a block is given the created socket is yielded for each address.
Returns true for IPv4 loopback address (127.0.0.0/8). It returns false otherwise.
Returns true for IPv6 loopback address (::1). It returns false otherwise.
Returns true for IPv6 link local address (ff80::/10). It returns false otherwise.
Returns true for IPv6 site local address (ffc0::/10). It returns false otherwise.
Receives up to maxlen bytes from udpsocket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The first element of the results, mesg, is the data received. The second element, sender_inet_addr, is an array to represent the sender address.
When recvfrom(2) returns 0, Socket#recvfrom_nonblock returns an empty string as data. It means an empty packet.
maxlen - the number of bytes to receive from the socket
flags - zero or more of the MSG_ options
outbuf - destination String buffer
options - keyword hash, supporting ‘exception: false`
require 'socket' s1 = UDPSocket.new s1.bind("127.0.0.1", 0) s2 = UDPSocket.new s2.bind("127.0.0.1", 0) s2.connect(*s1.addr.values_at(3,1)) s1.connect(*s2.addr.values_at(3,1)) s1.send "aaa", 0 begin # emulate blocking recvfrom p s2.recvfrom_nonblock(10) #=> ["aaa", ["AF_INET", 33302, "localhost.localdomain", "127.0.0.1"]] rescue IO::WaitReadable IO.select([s2]) retry end
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recvfrom_nonblock fails.
UDPSocket#recvfrom_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recvfrom_nonblock.
By specifying a keyword argument exception to false, you can indicate that recvfrom_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Accepts an incoming connection using accept(2) after O_NONBLOCK is set for the underlying file descriptor. It returns an accepted TCPSocket for the incoming connection.
require 'socket' serv = TCPServer.new(2202) begin # emulate blocking accept sock = serv.accept_nonblock rescue IO::WaitReadable, Errno::EINTR IO.select([serv]) retry end # sock is an accepted socket.
Refer to Socket#accept for the exceptions that may be thrown if the call to TCPServer#accept_nonblock fails.
TCPServer#accept_nonblock may raise any error corresponding to accept(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK, Errno::EAGAIN, Errno::ECONNABORTED, Errno::EPROTO, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying accept_nonblock.
By specifying a keyword argument exception to false, you can indicate that accept_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Accepts an incoming connection using accept(2) after O_NONBLOCK is set for the underlying file descriptor. It returns an accepted UNIXSocket for the incoming connection.
require 'socket' serv = UNIXServer.new("/tmp/sock") begin # emulate blocking accept sock = serv.accept_nonblock rescue IO::WaitReadable, Errno::EINTR IO.select([serv]) retry end # sock is an accepted socket.
Refer to Socket#accept for the exceptions that may be thrown if the call to UNIXServer#accept_nonblock fails.
UNIXServer#accept_nonblock may raise any error corresponding to accept(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK, Errno::EAGAIN, Errno::ECONNABORTED or Errno::EPROTO, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying accept_nonblock.
By specifying a keyword argument exception to false, you can indicate that accept_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Closes the read end of a StringIO. Will raise an IOError if the receiver is not readable.
Closes the write end of a StringIO. Will raise an IOError if the receiver is not writeable.
Returns true if the stream is not readable, false otherwise.
Returns true if the stream is not writable, false otherwise.
Returns the Encoding object that represents the encoding of the file. If the stream is write mode and no encoding is specified, returns nil.
Returns the Encoding of the internal string if conversion is specified. Otherwise returns nil.
This method is defined for backward compatibility.
Scans one byte and returns it. This method is not multibyte character sensitive. See also: getch.
s = StringScanner.new('ab') s.get_byte # => "a" s.get_byte # => "b" s.get_byte # => nil s = StringScanner.new("\244\242".force_encoding("euc-jp")) s.get_byte # => "\xA4" s.get_byte # => "\xA2" s.get_byte # => nil
Defines the constants of OLE Automation server as mod’s constants. The first argument is WIN32OLE object or type library name. If 2nd argument is omitted, the default is WIN32OLE. The first letter of Ruby’s constant variable name is upper case, so constant variable name of WIN32OLE object is capitalized. For example, the ‘xlTop’ constant of Excel is changed to ‘XlTop’ in WIN32OLE. If the first letter of constant variable is not [A-Z], then the constant is defined as CONSTANTS hash element.
module EXCEL_CONST end excel = WIN32OLE.new('Excel.Application') WIN32OLE.const_load(excel, EXCEL_CONST) puts EXCEL_CONST::XlTop # => -4160 puts EXCEL_CONST::CONSTANTS['_xlDialogChartSourceData'] # => 541 WIN32OLE.const_load(excel) puts WIN32OLE::XlTop # => -4160 module MSO end WIN32OLE.const_load('Microsoft Office 9.0 Object Library', MSO) puts MSO::MsoLineSingle # => 1
Returns event interface name if the method is event.
tobj = WIN32OLE_TYPE.new('Microsoft Excel 9.0 Object Library', 'Workbook') method = WIN32OLE_METHOD.new(tobj, 'SheetActivate') puts method.event_interface # => WorkbookEvents
Returns major version.
tobj = WIN32OLE_TYPE.new('Microsoft Word 10.0 Object Library', 'Documents') puts tobj.major_version # => 8