Executes the block for every line in ios, where lines are separated by sep. ios must be opened for reading or an IOError will be raised.
If no block is given, an enumerator is returned instead.
f = File.new("testfile") f.each {|line| puts "#{f.lineno}: #{line}" }
produces:
1: This is line one 2: This is line two 3: This is line three 4: And so on...
See IO.readlines for details about getline_args.
Immediately writes all buffered data in ios to disk.
If the underlying operating system does not support fdatasync(2), IO#fsync is called instead (which might raise a NotImplementedError).
Reads a one-character string from ios. Returns nil if called at end of file.
f = File.new("testfile") f.getc #=> "h" f.getc #=> "e"
Reads a one-character string from ios. Raises an EOFError on end of file.
f = File.new("testfile") f.readchar #=> "h" f.readchar #=> "e"
Pushes back one character (passed as a parameter) onto ios, such that a subsequent buffered character read will return it. Only one character may be pushed back before a subsequent read operation (that is, you will be able to read only the last of several characters that have been pushed back). Has no effect with unbuffered reads (such as IO#sysread).
f = File.new("testfile") #=> #<File:testfile> c = f.getc #=> "8" f.ungetc(c) #=> nil f.getc #=> "8"
Returns true if ios is associated with a terminal device (tty), false otherwise.
File.new("testfile").isatty #=> false File.new("/dev/tty").isatty #=> true
Executes block for each key in the database, passing the key and the corresponding value as a parameter.
Adds the key-value pairs of other to gdbm, overwriting entries with duplicate keys with those from other. other must have an each_pair method.
Sets the size of the internal bucket cache to size.
Iterates over the elements of range, passing each in turn to the block.
The each method can only be used if the begin object of the range supports the succ method. A TypeError is raised if the object does not have succ method defined (like Float).
If no block is given, an enumerator is returned instead.
(10..15).each {|n| print n, ' ' } # prints: 10 11 12 13 14 15 (2.5..5).each {|n| print n, ' ' } # raises: TypeError: can't iterate from Float
By using binary search, finds a value in range which meets the given condition in O(log n) where n is the size of the range.
You can use this method in two use cases: a find-minimum mode and a find-any mode. In either case, the elements of the range must be monotone (or sorted) with respect to the block.
In find-minimum mode (this is a good choice for typical use case), the block must return true or false, and there must be a value x so that:
the block returns false for any value which is less than x, and
the block returns true for any value which is greater than or equal to x.
If x is within the range, this method returns the value x. Otherwise, it returns nil.
ary = [0, 4, 7, 10, 12] (0...ary.size).bsearch {|i| ary[i] >= 4 } #=> 1 (0...ary.size).bsearch {|i| ary[i] >= 6 } #=> 2 (0...ary.size).bsearch {|i| ary[i] >= 8 } #=> 3 (0...ary.size).bsearch {|i| ary[i] >= 100 } #=> nil (0.0...Float::INFINITY).bsearch {|x| Math.log(x) >= 0 } #=> 1.0
In find-any mode (this behaves like libc’s bsearch(3)), the block must return a number, and there must be two values x and y (x <= y) so that:
the block returns a positive number for v if v < x,
the block returns zero for v if x <= v < y, and
the block returns a negative number for v if y <= v.
This method returns any value which is within the intersection of the given range and x…y (if any). If there is no value that satisfies the condition, it returns nil.
ary = [0, 100, 100, 100, 200] (0..4).bsearch {|i| 100 - ary[i] } #=> 1, 2 or 3 (0..4).bsearch {|i| 300 - ary[i] } #=> nil (0..4).bsearch {|i| 50 - ary[i] } #=> nil
You must not mix the two modes at a time; the block must always return either true/false, or always return a number. It is undefined which value is actually picked up at each iteration.
Returns the maximum value in the range, or an array of maximum values in the range if given an Integer argument.
For inclusive ranges with an end, the maximum value of the range is the same as the end of the range.
If an argument or block is given, or self is an exclusive, non-numeric range, calls Enumerable#max (via super) with the argument and/or block to get the maximum values, unless self is a beginless range, in which case it raises a RangeError.
If self is an exclusive, integer range (both start and end of the range are integers), and no arguments or block are provided, returns last value in the range (1 before the end). Otherwise, if self is an exclusive, numeric range, raises a TypeError.
Returns nil if the begin value of the range larger than the end value. Returns nil if the begin value of an exclusive range is equal to the end value. Raises a RangeError if called on an endless range.
Examples:
(10..20).max #=> 20 (10..20).max(2) #=> [20, 19] (10...20).max #=> 19 (10...20).max(2) #=> [19, 18] (10...20).max{|x, y| -x <=> -y } #=> 10 (10...20).max(2){|x, y| -x <=> -y } #=> [10, 11]
Returns a two element array which contains the minimum and the maximum value in the range.
Can be given an optional block to override the default comparison method a <=> b.
Returns a new set that is a copy of the set, flattening each containing set recursively.
Equivalent to Set#flatten, but replaces the receiver with the result in place. Returns nil if no modifications were made.
Calls the given block once for each element in the set, passing the element as parameter. Returns an enumerator if no block is given.
Allocates space for a new object of class’s class and does not call initialize on the new instance. The returned object must be an instance of class.
klass = Class.new do def initialize(*args) @initialized = true end def initialized? @initialized || false end end klass.allocate.initialized? #=> false
Returns clean pathname of self with consecutive slashes and useless dots removed. The filesystem is not accessed.
If consider_symlink is true, then a more conservative algorithm is used to avoid breaking symbolic linkages. This may retain more .. entries than absolutely necessary, but without accessing the filesystem, this can’t be avoided.
See Pathname#realpath.
The opposite of Pathname#absolute?
It returns false if the pathname begins with a slash.
p = Pathname.new('/im/sure') p.relative? #=> false p = Pathname.new('not/so/sure') p.relative? #=> true
Returns the children of the directory (files and subdirectories, not recursive) as an array of Pathname objects.
By default, the returned pathnames will have enough information to access the files. If you set with_directory to false, then the returned pathnames will contain the filename only.
For example:
pn = Pathname("/usr/lib/ruby/1.8")
pn.children
# -> [ Pathname:/usr/lib/ruby/1.8/English.rb,
Pathname:/usr/lib/ruby/1.8/Env.rb,
Pathname:/usr/lib/ruby/1.8/abbrev.rb, ... ]
pn.children(false)
# -> [ Pathname:English.rb, Pathname:Env.rb, Pathname:abbrev.rb, ... ]
Note that the results never contain the entries . and .. in the directory because they are not children.
Creates a full path, including any intermediate directories that don’t yet exist.
See FileUtils.mkpath and FileUtils.mkdir_p
Returns the real (absolute) pathname for self in the actual filesystem.
Does not contain symlinks or useless dots, .. and ..
All components of the pathname must exist when this method is called.
Returns the real (absolute) pathname of self in the actual filesystem.
Does not contain symlinks or useless dots, .. and ..
The last component of the real pathname can be nonexistent.