Receives up to maxlen bytes from socket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The first element of the results, mesg, is the data received. The second element, sender_addrinfo, contains protocol-specific address information of the sender.
When recvfrom(2) returns 0, Socket#recvfrom_nonblock returns an empty string as data. The meaning depends on the socket: EOF on TCP, empty packet on UDP, etc.
maxlen - the maximum number of bytes to receive from the socket
flags - zero or more of the MSG_ options
outbuf - destination String buffer
opts - keyword hash, supporting ‘exception: false`
# In one file, start this first require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.bind(sockaddr) socket.listen(5) client, client_addrinfo = socket.accept begin # emulate blocking recvfrom pair = client.recvfrom_nonblock(20) rescue IO::WaitReadable IO.select([client]) retry end data = pair[0].chomp puts "I only received 20 bytes '#{data}'" sleep 1 socket.close # In another file, start this second require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.connect(sockaddr) socket.puts "Watch this get cut short!" socket.close
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recvfrom_nonblock fails.
Socket#recvfrom_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recvfrom_nonblock.
By specifying a keyword argument exception to false, you can indicate that recvfrom_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Returns a socket object which contains the file descriptor, fd.
# If invoked by inetd, STDIN/STDOUT/STDERR is a socket. STDIN_SOCK = Socket.for_fd(STDIN.fileno) p STDIN_SOCK.remote_address
Disallows further read using shutdown system call.
s1, s2 = UNIXSocket.pair s1.close_read s2.puts #=> Broken pipe (Errno::EPIPE)
Returns an Addrinfo object for local address obtained by getsockname.
Note that addrinfo.protocol is filled by 0.
TCPSocket.open("www.ruby-lang.org", 80) {|s| p s.local_address #=> #<Addrinfo: 192.168.0.129:36873 TCP> } TCPServer.open("127.0.0.1", 1512) {|serv| p serv.local_address #=> #<Addrinfo: 127.0.0.1:1512 TCP> }
Returns an address of the socket suitable for connect in the local machine.
This method returns self.local_address, except following condition.
IPv4 unspecified address (0.0.0.0) is replaced by IPv4 loopback address (127.0.0.1).
IPv6 unspecified address (::) is replaced by IPv6 loopback address (::1).
If the local address is not suitable for connect, SocketError is raised. IPv4 and IPv6 address which port is 0 is not suitable for connect. Unix domain socket which has no path is not suitable for connect.
Addrinfo.tcp("0.0.0.0", 0).listen {|serv| p serv.connect_address #=> #<Addrinfo: 127.0.0.1:53660 TCP> serv.connect_address.connect {|c| s, _ = serv.accept p [c, s] #=> [#<Socket:fd 4>, #<Socket:fd 6>] } }
Receives up to maxlen bytes from socket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The result, mesg, is the data received.
When recvfrom(2) returns 0, Socket#recv_nonblock returns an empty string as data. The meaning depends on the socket: EOF on TCP, empty packet on UDP, etc.
maxlen - the number of bytes to receive from the socket
flags - zero or more of the MSG_ options
buf - destination String buffer
options - keyword hash, supporting ‘exception: false`
serv = TCPServer.new("127.0.0.1", 0) af, port, host, addr = serv.addr c = TCPSocket.new(addr, port) s = serv.accept c.send "aaa", 0 begin # emulate blocking recv. p s.recv_nonblock(10) #=> "aaa" rescue IO::WaitReadable IO.select([s]) retry end
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recv_nonblock fails.
BasicSocket#recv_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recv_nonblock.
By specifying a keyword argument exception to false, you can indicate that recv_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
recvmsg receives a message using recvmsg(2) system call in non-blocking manner.
It is similar to BasicSocket#recvmsg but non-blocking flag is set before the system call and it doesn’t retry the system call.
By specifying a keyword argument exception to false, you can indicate that recvmsg_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
creates a socket connected to remote_addr_args and bound to self.
The optional last argument opts is options represented by a hash. opts may have following options:
specify the timeout in seconds.
If a block is given, it is called with the socket and the value of the block is returned. The socket is returned otherwise.
Addrinfo.tcp("0.0.0.0", 4649).connect_to("www.ruby-lang.org", 80) {|s| s.print "GET / HTTP/1.0\r\nHost: www.ruby-lang.org\r\n\r\n" puts s.read }
Returns the IP address as a string.
Addrinfo.tcp("127.0.0.1", 80).ip_address #=> "127.0.0.1" Addrinfo.tcp("::1", 80).ip_address #=> "::1"
Returns the port number as an integer.
Addrinfo.tcp("127.0.0.1", 80).ip_port #=> 80 Addrinfo.tcp("::1", 80).ip_port #=> 80
Returns true for IPv4 multicast address (224.0.0.0/4). It returns false otherwise.
Returns true for IPv6 multicast address (ff00::/8). It returns false otherwise.
returns the socket address as packed struct sockaddr string.
Addrinfo.tcp("localhost", 80).to_sockaddr #=> "\x02\x00\x00P\x7F\x00\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00"
Receives up to maxlen bytes from udpsocket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The first element of the results, mesg, is the data received. The second element, sender_inet_addr, is an array to represent the sender address.
When recvfrom(2) returns 0, Socket#recvfrom_nonblock returns an empty string as data. It means an empty packet.
maxlen - the number of bytes to receive from the socket
flags - zero or more of the MSG_ options
outbuf - destination String buffer
options - keyword hash, supporting ‘exception: false`
require 'socket' s1 = UDPSocket.new s1.bind("127.0.0.1", 0) s2 = UDPSocket.new s2.bind("127.0.0.1", 0) s2.connect(*s1.addr.values_at(3,1)) s1.connect(*s2.addr.values_at(3,1)) s1.send "aaa", 0 begin # emulate blocking recvfrom p s2.recvfrom_nonblock(10) #=> ["aaa", ["AF_INET", 33302, "localhost.localdomain", "127.0.0.1"]] rescue IO::WaitReadable IO.select([s2]) retry end
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recvfrom_nonblock fails.
UDPSocket#recvfrom_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recvfrom_nonblock.
By specifying a keyword argument exception to false, you can indicate that recvfrom_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Example
UNIXServer.open("/tmp/sock") {|serv| UNIXSocket.open("/tmp/sock") {|c| s = serv.accept c.send_io STDOUT stdout = s.recv_io p STDOUT.fileno #=> 1 p stdout.fileno #=> 7 stdout.puts "hello" # outputs "hello\n" to standard output. } }
klass will determine the class of io returned (using the IO.for_fd singleton method or similar). If klass is nil, an integer file descriptor is returned.
mode is the same as the argument passed to IO.for_fd
Closes the read end of a StringIO. Will raise an IOError if the receiver is not readable.
Returns true if the stream is not readable, false otherwise.
This method is defined for backward compatibility.
Returns the pre-match
(in the regular expression sense) of the last scan.s = StringScanner.new('test string') s.scan(/\w+/) # -> "test" s.scan(/\s+/) # -> " " s.pre_match # -> "test" s.post_match # -> "string"
Returns the post-match
(in the regular expression sense) of the last scan.s = StringScanner.new('test string') s.scan(/\w+/) # -> "test" s.scan(/\s+/) # -> " " s.pre_match # -> "test" s.post_match # -> "string"
Whether scanner uses fixed anchor mode or not.
If fixed anchor mode is used, \A always matches the beginning of the string. Otherwise, \A always matches the current position.
Defines the constants of OLE Automation server as mod’s constants. The first argument is WIN32OLE object or type library name. If 2nd argument is omitted, the default is WIN32OLE. The first letter of Ruby’s constant variable name is upper case, so constant variable name of WIN32OLE object is capitalized. For example, the ‘xlTop’ constant of Excel is changed to ‘XlTop’ in WIN32OLE. If the first letter of constant variable is not [A-Z], then the constant is defined as CONSTANTS hash element.
module EXCEL_CONST end excel = WIN32OLE.new('Excel.Application') WIN32OLE.const_load(excel, EXCEL_CONST) puts EXCEL_CONST::XlTop # => -4160 puts EXCEL_CONST::CONSTANTS['_xlDialogChartSourceData'] # => 541 WIN32OLE.const_load(excel) puts WIN32OLE::XlTop # => -4160 module MSO end WIN32OLE.const_load('Microsoft Office 9.0 Object Library', MSO) puts MSO::MsoLineSingle # => 1
Invokes Release method of Dispatch interface of WIN32OLE object. You should not use this method because this method exists only for debugging WIN32OLE. The return value is reference counter of OLE object.
Creates GUID.
WIN32OLE.create_guid # => {1CB530F1-F6B1-404D-BCE6-1959BF91F4A8}
invokes Release method of Dispatch interface of WIN32OLE object. Usually, you do not need to call this method because Release method called automatically when WIN32OLE object garbaged.