Constructs the default Hash of Regexp’s.
Returns Regexp that is default self.regexp, unless schemes is provided. Then it is a Regexp.union with self.pattern.
Constructs the default Hash of patterns.
Constructs the default Hash of Regexp’s.
The response’s HTTP status line
Returns the source encoding as an encoding object.
Note that the result may not be equal to the source encoding of the encoding converter if the conversion has multiple steps.
ec = Encoding::Converter.new("ISO-8859-1", "EUC-JP") # ISO-8859-1 -> UTF-8 -> EUC-JP begin ec.convert("\xa0") # NO-BREAK SPACE, which is available in UTF-8 but not in EUC-JP. rescue Encoding::UndefinedConversionError p $!.source_encoding #=> #<Encoding:UTF-8> p $!.destination_encoding #=> #<Encoding:EUC-JP> p $!.source_encoding_name #=> "UTF-8" p $!.destination_encoding_name #=> "EUC-JP" end
Returns the source encoding as an encoding object.
Note that the result may not be equal to the source encoding of the encoding converter if the conversion has multiple steps.
ec = Encoding::Converter.new("ISO-8859-1", "EUC-JP") # ISO-8859-1 -> UTF-8 -> EUC-JP begin ec.convert("\xa0") # NO-BREAK SPACE, which is available in UTF-8 but not in EUC-JP. rescue Encoding::UndefinedConversionError p $!.source_encoding #=> #<Encoding:UTF-8> p $!.destination_encoding #=> #<Encoding:EUC-JP> p $!.source_encoding_name #=> "UTF-8" p $!.destination_encoding_name #=> "EUC-JP" end
Returns the bytes to be read again when Encoding::InvalidByteSequenceError occurs.
Returns the corresponding ASCII compatible encoding.
Returns nil if the argument is an ASCII compatible encoding.
“corresponding ASCII compatible encoding” is an ASCII compatible encoding which can represents exactly the same characters as the given ASCII incompatible encoding. So, no conversion undefined error occurs when converting between the two encodings.
Encoding::Converter.asciicompat_encoding("ISO-2022-JP") #=> #<Encoding:stateless-ISO-2022-JP> Encoding::Converter.asciicompat_encoding("UTF-16BE") #=> #<Encoding:UTF-8> Encoding::Converter.asciicompat_encoding("UTF-8") #=> nil
Returns the source encoding as an Encoding object.
possible opt elements:
hash form: :partial_input => true # source buffer may be part of larger source :after_output => true # stop conversion after output before input integer form: Encoding::Converter::PARTIAL_INPUT Encoding::Converter::AFTER_OUTPUT
possible results:
:invalid_byte_sequence :incomplete_input :undefined_conversion :after_output :destination_buffer_full :source_buffer_empty :finished
primitive_convert converts source_buffer into destination_buffer.
source_buffer should be a string or nil. nil means an empty string.
destination_buffer should be a string.
destination_byteoffset should be an integer or nil. nil means the end of destination_buffer. If it is omitted, nil is assumed.
destination_bytesize should be an integer or nil. nil means unlimited. If it is omitted, nil is assumed.
opt should be nil, a hash or an integer. nil means no flags. If it is omitted, nil is assumed.
primitive_convert converts the content of source_buffer from beginning and store the result into destination_buffer.
destination_byteoffset and destination_bytesize specify the region which the converted result is stored. destination_byteoffset specifies the start position in destination_buffer in bytes. If destination_byteoffset is nil, destination_buffer.bytesize is used for appending the result. destination_bytesize specifies maximum number of bytes. If destination_bytesize is nil, destination size is unlimited. After conversion, destination_buffer is resized to destination_byteoffset + actually produced number of bytes. Also destination_buffer’s encoding is set to destination_encoding.
primitive_convert drops the converted part of source_buffer. the dropped part is converted in destination_buffer or buffered in Encoding::Converter object.
primitive_convert stops conversion when one of following condition met.
invalid byte sequence found in source buffer (:invalid_byte_sequence) primitive_errinfo and last_error methods returns the detail of the error.
unexpected end of source buffer (:incomplete_input) this occur only when :partial_input is not specified. primitive_errinfo and last_error methods returns the detail of the error.
character not representable in output encoding (:undefined_conversion) primitive_errinfo and last_error methods returns the detail of the error.
after some output is generated, before input is done (:after_output) this occur only when :after_output is specified.
destination buffer is full (:destination_buffer_full) this occur only when destination_bytesize is non-nil.
source buffer is empty (:source_buffer_empty) this occur only when :partial_input is specified.
conversion is finished (:finished)
example:
ec = Encoding::Converter.new("UTF-8", "UTF-16BE") ret = ec.primitive_convert(src="pi", dst="", nil, 100) p [ret, src, dst] #=> [:finished, "", "\x00p\x00i"] ec = Encoding::Converter.new("UTF-8", "UTF-16BE") ret = ec.primitive_convert(src="pi", dst="", nil, 1) p [ret, src, dst] #=> [:destination_buffer_full, "i", "\x00"] ret = ec.primitive_convert(src, dst="", nil, 1) p [ret, src, dst] #=> [:destination_buffer_full, "", "p"] ret = ec.primitive_convert(src, dst="", nil, 1) p [ret, src, dst] #=> [:destination_buffer_full, "", "\x00"] ret = ec.primitive_convert(src, dst="", nil, 1) p [ret, src, dst] #=> [:finished, "", "i"]
Inserts string into the encoding converter. The string will be converted to the destination encoding and output on later conversions.
If the destination encoding is stateful, string is converted according to the state and the state is updated.
This method should be used only when a conversion error occurs.
ec = Encoding::Converter.new("utf-8", "iso-8859-1") src = "HIRAGANA LETTER A is \u{3042}." dst = "" p ec.primitive_convert(src, dst) #=> :undefined_conversion puts "[#{dst.dump}, #{src.dump}]" #=> ["HIRAGANA LETTER A is ", "."] ec.insert_output("<err>") p ec.primitive_convert(src, dst) #=> :finished puts "[#{dst.dump}, #{src.dump}]" #=> ["HIRAGANA LETTER A is <err>.", ""] ec = Encoding::Converter.new("utf-8", "iso-2022-jp") src = "\u{306F 3041 3068 2661 3002}" # U+2661 is not representable in iso-2022-jp dst = "" p ec.primitive_convert(src, dst) #=> :undefined_conversion puts "[#{dst.dump}, #{src.dump}]" #=> ["\e$B$O$!$H".force_encoding("ISO-2022-JP"), "\xE3\x80\x82"] ec.insert_output "?" # state change required to output "?". p ec.primitive_convert(src, dst) #=> :finished puts "[#{dst.dump}, #{src.dump}]" #=> ["\e$B$O$!$H\e(B?\e$B!#\e(B".force_encoding("ISO-2022-JP"), ""]
Returns a new closure wrapper for the name function.
ctype is the return type of the function
argtype is an Array of arguments, passed to the callback function
call_type is the abi of the closure
block is passed to the callback
See Fiddle::Closure
OpenSSL::PKCS5.pbkdf2_hmac has been renamed to OpenSSL::KDF.pbkdf2_hmac. This method is provided for backwards compatibility.
PKCS #5 PBKDF2 (Password-Based Key Derivation Function 2) in combination with HMAC. Takes pass, salt and iterations, and then derives a key of length bytes.
For more information about PBKDF2, see RFC 2898 Section 5.2 (tools.ietf.org/html/rfc2898#section-5.2).
The passphrase.
The salt. Salts prevent attacks based on dictionaries of common passwords and attacks based on rainbow tables. It is a public value that can be safely stored along with the password (e.g. if the derived value is used for password storage).
The iteration count. This provides the ability to tune the algorithm. It is better to use the highest count possible for the maximum resistance to brute-force attacks.
The desired length of the derived key in octets.
The hash algorithm used with HMAC for the PRF. May be a String representing the algorithm name, or an instance of OpenSSL::Digest.
Generates a mask bit for a priority level. See mask=
A wrapper class to use a StringIO object as the body and switch to a TempFile when the passed threshold is passed. Initialize the data from the query.
Handles multipart forms (in particular, forms that involve file uploads). Reads query parameters in the @params field, and cookies into @cookies.
Generate an Image Button Input element as a string.
src is the URL of the image to use for the button. name is the input name. alt is the alternative text for the image.
Alternatively, the attributes can be specified as a hash.
image_button("url") # <INPUT TYPE="image" SRC="url"> image_button("url", "name", "string") # <INPUT TYPE="image" SRC="url" NAME="name" ALT="string"> image_button("SRC" => "url", "ALT" => "string") # <INPUT TYPE="image" SRC="url" ALT="string">
Returns a list of encodings in Content-Encoding field as an array of strings.
The encodings are downcased for canonicalization.
A node-set is converted to a string by returning the concatenation of the string-value of each of the children of the node in the node-set that is first in document order. If the node-set is empty, an empty string is returned.
Kouhei fixed this