Results for: "Array"

returns an integer in (-infty, 0] a number closer to 0 means the dependency is less constraining

dependencies w/ 0 or 1 possibilities (ignoring version requirements) are given very negative values, so they always sort first, before dependencies that are unconstrained

Sets the ENABLE_SHARED entry in RbConfig::CONFIG to value and restores the original value when the block ends

Reads a binary file at path

Display a warning on stderr. Will ask question if it is not nil.

Display an error message in a location expected to get error messages. Will ask question if it is not nil.

Terminate the application with exit code status, running any exit handlers that might have been defined.

Returns an Array of the components defined from the COMPONENT Array.

Private method to cleanup dn from using the path component attribute.

Private method to cleanup attributes, scope, filter, and extensions from using the query component attribute.

This method provides the metavariables defined by the revision 3 of “The WWW Common Gateway Interface Version 1.1” To browse the current document of CGI Version 1.1, see below: tools.ietf.org/html/rfc3875

Creates an error page for exception ex with an optional backtrace

Finds a servlet for path

Returns the discarded bytes when Encoding::InvalidByteSequenceError occurs.

ec = Encoding::Converter.new("EUC-JP", "ISO-8859-1")
begin
  ec.convert("abc\xA1\xFFdef")
rescue Encoding::InvalidByteSequenceError
  p $!      #=> #<Encoding::InvalidByteSequenceError: "\xA1" followed by "\xFF" on EUC-JP>
  puts $!.error_bytes.dump          #=> "\xA1"
  puts $!.readagain_bytes.dump      #=> "\xFF"
end

Returns a conversion path.

p Encoding::Converter.search_convpath("ISO-8859-1", "EUC-JP")
#=> [[#<Encoding:ISO-8859-1>, #<Encoding:UTF-8>],
#    [#<Encoding:UTF-8>, #<Encoding:EUC-JP>]]

p Encoding::Converter.search_convpath("ISO-8859-1", "EUC-JP", universal_newline: true)
or
p Encoding::Converter.search_convpath("ISO-8859-1", "EUC-JP", newline: :universal)
#=> [[#<Encoding:ISO-8859-1>, #<Encoding:UTF-8>],
#    [#<Encoding:UTF-8>, #<Encoding:EUC-JP>],
#    "universal_newline"]

p Encoding::Converter.search_convpath("ISO-8859-1", "UTF-32BE", universal_newline: true)
or
p Encoding::Converter.search_convpath("ISO-8859-1", "UTF-32BE", newline: :universal)
#=> [[#<Encoding:ISO-8859-1>, #<Encoding:UTF-8>],
#    "universal_newline",
#    [#<Encoding:UTF-8>, #<Encoding:UTF-32BE>]]

primitive_errinfo returns important information regarding the last error as a 5-element array:

[result, enc1, enc2, error_bytes, readagain_bytes]

result is the last result of primitive_convert.

Other elements are only meaningful when result is :invalid_byte_sequence, :incomplete_input or :undefined_conversion.

enc1 and enc2 indicate a conversion step as a pair of strings. For example, a converter from EUC-JP to ISO-8859-1 converts a string as follows: EUC-JP -> UTF-8 -> ISO-8859-1. So [enc1, enc2] is either [“EUC-JP”, “UTF-8”] or [“UTF-8”, “ISO-8859-1”].

error_bytes and readagain_bytes indicate the byte sequences which caused the error. error_bytes is discarded portion. readagain_bytes is buffered portion which is read again on next conversion.

Example:

# \xff is invalid as EUC-JP.
ec = Encoding::Converter.new("EUC-JP", "Shift_JIS")
ec.primitive_convert(src="\xff", dst="", nil, 10)
p ec.primitive_errinfo
#=> [:invalid_byte_sequence, "EUC-JP", "UTF-8", "\xFF", ""]

# HIRAGANA LETTER A (\xa4\xa2 in EUC-JP) is not representable in ISO-8859-1.
# Since this error is occur in UTF-8 to ISO-8859-1 conversion,
# error_bytes is HIRAGANA LETTER A in UTF-8 (\xE3\x81\x82).
ec = Encoding::Converter.new("EUC-JP", "ISO-8859-1")
ec.primitive_convert(src="\xa4\xa2", dst="", nil, 10)
p ec.primitive_errinfo
#=> [:undefined_conversion, "UTF-8", "ISO-8859-1", "\xE3\x81\x82", ""]

# partial character is invalid
ec = Encoding::Converter.new("EUC-JP", "ISO-8859-1")
ec.primitive_convert(src="\xa4", dst="", nil, 10)
p ec.primitive_errinfo
#=> [:incomplete_input, "EUC-JP", "UTF-8", "\xA4", ""]

# Encoding::Converter::PARTIAL_INPUT prevents invalid errors by
# partial characters.
ec = Encoding::Converter.new("EUC-JP", "ISO-8859-1")
ec.primitive_convert(src="\xa4", dst="", nil, 10, Encoding::Converter::PARTIAL_INPUT)
p ec.primitive_errinfo
#=> [:source_buffer_empty, nil, nil, nil, nil]

# \xd8\x00\x00@ is invalid as UTF-16BE because
# no low surrogate after high surrogate (\xd8\x00).
# It is detected by 3rd byte (\00) which is part of next character.
# So the high surrogate (\xd8\x00) is discarded and
# the 3rd byte is read again later.
# Since the byte is buffered in ec, it is dropped from src.
ec = Encoding::Converter.new("UTF-16BE", "UTF-8")
ec.primitive_convert(src="\xd8\x00\x00@", dst="", nil, 10)
p ec.primitive_errinfo
#=> [:invalid_byte_sequence, "UTF-16BE", "UTF-8", "\xD8\x00", "\x00"]
p src
#=> "@"

# Similar to UTF-16BE, \x00\xd8@\x00 is invalid as UTF-16LE.
# The problem is detected by 4th byte.
ec = Encoding::Converter.new("UTF-16LE", "UTF-8")
ec.primitive_convert(src="\x00\xd8@\x00", dst="", nil, 10)
p ec.primitive_errinfo
#=> [:invalid_byte_sequence, "UTF-16LE", "UTF-8", "\x00\xD8", "@\x00"]
p src
#=> ""

Returns an exception object for the last conversion. Returns nil if the last conversion did not produce an error.

“error” means that Encoding::InvalidByteSequenceError and Encoding::UndefinedConversionError for Encoding::Converter#convert and :invalid_byte_sequence, :incomplete_input and :undefined_conversion for Encoding::Converter#primitive_convert.

ec = Encoding::Converter.new("utf-8", "iso-8859-1")
p ec.primitive_convert(src="\xf1abcd", dst="")       #=> :invalid_byte_sequence
p ec.last_error      #=> #<Encoding::InvalidByteSequenceError: "\xF1" followed by "a" on UTF-8>
p ec.primitive_convert(src, dst, nil, 1)             #=> :destination_buffer_full
p ec.last_error      #=> nil

Reads the file from pathname, then parses it like ::parse, returning the root node of the abstract syntax tree.

SyntaxError is raised if pathname’s contents are not valid Ruby syntax.

RubyVM::AbstractSyntaxTree.parse_file("my-app/app.rb")
# => #<RubyVM::AbstractSyntaxTree::Node:SCOPE@1:0-31:3>

Parses a C prototype signature

If Hash tymap is provided, the return value and the arguments from the signature are expected to be keys, and the value will be the C type to be looked up.

Example:

require 'fiddle/import'

include Fiddle::CParser
  #=> Object

parse_signature('double sum(double, double)')
  #=> ["sum", Fiddle::TYPE_DOUBLE, [Fiddle::TYPE_DOUBLE, Fiddle::TYPE_DOUBLE]]

parse_signature('void update(void (*cb)(int code))')
  #=> ["update", Fiddle::TYPE_VOID, [Fiddle::TYPE_VOIDP]]

parse_signature('char (*getbuffer(void))[80]')
  #=> ["getbuffer", Fiddle::TYPE_VOIDP, []]

Given a String of C type ty, returns the corresponding Fiddle constant.

ty can also accept an Array of C type Strings, and will be returned in a corresponding Array.

If Hash tymap is provided, ty is expected to be the key, and the value will be the C type to be looked up.

Example:

require 'fiddle/import'

include Fiddle::CParser
  #=> Object

parse_ctype('int')
  #=> Fiddle::TYPE_INT

parse_ctype('double diff')
  #=> Fiddle::TYPE_DOUBLE

parse_ctype('unsigned char byte')
  #=> -Fiddle::TYPE_CHAR

parse_ctype('const char* const argv[]')
  #=> -Fiddle::TYPE_VOIDP

Mixes the bytes from str into the Pseudo Random Number Generator(PRNG) state.

Thus, if the data from str are unpredictable to an adversary, this increases the uncertainty about the state and makes the PRNG output less predictable.

The entropy argument is (the lower bound of) an estimate of how much randomness is contained in str, measured in bytes.

Example

pid = $$
now = Time.now
ary = [now.to_i, now.nsec, 1000, pid]
OpenSSL::Random.add(ary.join, 0.0)
OpenSSL::Random.seed(ary.join)

Generates a String with length number of cryptographically strong pseudo-random bytes.

Example

OpenSSL::Random.random_bytes(12)
#=> "..."

Returns an Array of individual raw profile data Hashes ordered from earliest to latest by :GC_INVOKE_TIME.

For example:

[
  {
     :GC_TIME=>1.3000000000000858e-05,
     :GC_INVOKE_TIME=>0.010634999999999999,
     :HEAP_USE_SIZE=>289640,
     :HEAP_TOTAL_SIZE=>588960,
     :HEAP_TOTAL_OBJECTS=>14724,
     :GC_IS_MARKED=>false
  },
  # ...
]

The keys mean:

:GC_TIME

Time elapsed in seconds for this GC run

:GC_INVOKE_TIME

Time elapsed in seconds from startup to when the GC was invoked

:HEAP_USE_SIZE

Total bytes of heap used

:HEAP_TOTAL_SIZE

Total size of heap in bytes

:HEAP_TOTAL_OBJECTS

Total number of objects

:GC_IS_MARKED

Returns true if the GC is in mark phase

If ruby was built with GC_PROFILE_MORE_DETAIL, you will also have access to the following hash keys:

:GC_MARK_TIME

:GC_SWEEP_TIME

:ALLOCATE_INCREASE

:ALLOCATE_LIMIT

:HEAP_USE_PAGES

:HEAP_LIVE_OBJECTS

:HEAP_FREE_OBJECTS

:HAVE_FINALIZE