Returns a hash, that will be turned into a JSON object and represent this object.
Try to convert obj into an IO, using to_io method. Returns converted IO or nil if obj cannot be converted for any reason.
IO.try_convert(STDOUT) #=> STDOUT IO.try_convert("STDOUT") #=> nil require 'zlib' f = open("/tmp/zz.gz") #=> #<File:/tmp/zz.gz> z = Zlib::GzipReader.open(f) #=> #<Zlib::GzipReader:0x81d8744> IO.try_convert(z) #=> #<File:/tmp/zz.gz>
Returns ios.
Reads at most maxlen bytes from ios using the read(2) system call after O_NONBLOCK is set for the underlying file descriptor.
If the optional outbuf argument is present, it must reference a String, which will receive the data. The outbuf will contain only the received data after the method call even if it is not empty at the beginning.
read_nonblock just calls the read(2) system call. It causes all errors the read(2) system call causes: Errno::EWOULDBLOCK, Errno::EINTR, etc. The caller should care such errors.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying read_nonblock.
read_nonblock causes EOFError on EOF.
On some platforms, such as Windows, non-blocking mode is not supported on IO objects other than sockets. In such cases, Errno::EBADF will be raised.
If the read byte buffer is not empty, read_nonblock reads from the buffer like readpartial. In this case, the read(2) system call is not called.
When read_nonblock raises an exception kind of IO::WaitReadable, read_nonblock should not be called until io is readable for avoiding busy loop. This can be done as follows.
# emulates blocking read (readpartial). begin result = io.read_nonblock(maxlen) rescue IO::WaitReadable IO.select([io]) retry end
Although IO#read_nonblock doesn’t raise IO::WaitWritable. OpenSSL::Buffering#read_nonblock can raise IO::WaitWritable. If IO and SSL should be used polymorphically, IO::WaitWritable should be rescued too. See the document of OpenSSL::Buffering#read_nonblock for sample code.
Note that this method is identical to readpartial except the non-blocking flag is set.
By specifying a keyword argument exception to false, you can indicate that read_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead. At EOF, it will return nil instead of raising EOFError.
Writes the given string to ios using the write(2) system call after O_NONBLOCK is set for the underlying file descriptor.
It returns the number of bytes written.
write_nonblock just calls the write(2) system call. It causes all errors the write(2) system call causes: Errno::EWOULDBLOCK, Errno::EINTR, etc. The result may also be smaller than string.length (partial write). The caller should care such errors and partial write.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitWritable. So IO::WaitWritable can be used to rescue the exceptions for retrying write_nonblock.
# Creates a pipe. r, w = IO.pipe # write_nonblock writes only 65536 bytes and return 65536. # (The pipe size is 65536 bytes on this environment.) s = "a" * 100000 p w.write_nonblock(s) #=> 65536 # write_nonblock cannot write a byte and raise EWOULDBLOCK (EAGAIN). p w.write_nonblock("b") # Resource temporarily unavailable (Errno::EAGAIN)
If the write buffer is not empty, it is flushed at first.
When write_nonblock raises an exception kind of IO::WaitWritable, write_nonblock should not be called until io is writable for avoiding busy loop. This can be done as follows.
begin result = io.write_nonblock(string) rescue IO::WaitWritable, Errno::EINTR IO.select(nil, [io]) retry end
Note that this doesn’t guarantee to write all data in string. The length written is reported as result and it should be checked later.
On some platforms such as Windows, write_nonblock is not supported according to the kind of the IO object. In such cases, write_nonblock raises Errno::EBADF.
By specifying a keyword argument exception to false, you can indicate that write_nonblock should not raise an IO::WaitWritable exception, but return the symbol :wait_writable instead.
Returns a hash, that will be turned into a JSON object and represent this object.
Stores class name (OpenStruct) with this struct’s values t as a JSON string.
Returns a hash, that will be turned into a JSON object and represent this object.
Stores class name (Range) with JSON array of arguments a which include first (integer), last (integer), and exclude_end? (boolean) as JSON string.
Deserializes JSON string by constructing new Regexp object with source s (Regexp or String) and options o serialized by to_json
Returns a hash, that will be turned into a JSON object and represent this object.
Try to convert obj into a Regexp, using to_regexp method. Returns converted regexp or nil if obj cannot be converted for any reason.
Regexp.try_convert(/re/) #=> /re/ Regexp.try_convert("re") #=> nil o = Object.new Regexp.try_convert(o) #=> nil def o.to_regexp() /foo/ end Regexp.try_convert(o) #=> /foo/
return the JSON value
Returns a hash, that will be turned into a JSON object and represent this object.
Receives up to maxlen bytes from socket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The first element of the results, mesg, is the data received. The second element, sender_addrinfo, contains protocol-specific address information of the sender.
When recvfrom(2) returns 0, Socket#recvfrom_nonblock returns an empty string as data. The meaning depends on the socket: EOF on TCP, empty packet on UDP, etc.
maxlen - the maximum number of bytes to receive from the socket
flags - zero or more of the MSG_ options
outbuf - destination String buffer
opts - keyword hash, supporting ‘exception: false`
# In one file, start this first require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.bind(sockaddr) socket.listen(5) client, client_addrinfo = socket.accept begin # emulate blocking recvfrom pair = client.recvfrom_nonblock(20) rescue IO::WaitReadable IO.select([client]) retry end data = pair[0].chomp puts "I only received 20 bytes '#{data}'" sleep 1 socket.close # In another file, start this second require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.connect(sockaddr) socket.puts "Watch this get cut short!" socket.close
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recvfrom_nonblock fails.
Socket#recvfrom_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recvfrom_nonblock.
By specifying a keyword argument exception to false, you can indicate that recvfrom_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Accepts an incoming connection using accept(2) after O_NONBLOCK is set for the underlying file descriptor. It returns an array containing the accepted socket for the incoming connection, client_socket, and an Addrinfo, client_addrinfo.
# In one script, start this first require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.bind(sockaddr) socket.listen(5) begin # emulate blocking accept client_socket, client_addrinfo = socket.accept_nonblock rescue IO::WaitReadable, Errno::EINTR IO.select([socket]) retry end puts "The client said, '#{client_socket.readline.chomp}'" client_socket.puts "Hello from script one!" socket.close # In another script, start this second require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.connect(sockaddr) socket.puts "Hello from script 2." puts "The server said, '#{socket.readline.chomp}'" socket.close
Refer to Socket#accept for the exceptions that may be thrown if the call to accept_nonblock fails.
Socket#accept_nonblock may raise any error corresponding to accept(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK, Errno::EAGAIN, Errno::ECONNABORTED or Errno::EPROTO, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying accept_nonblock.
By specifying a keyword argument exception to false, you can indicate that accept_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.