Results for: "OptionParser"

Initializes instance variable.

Continuation objects are generated by Kernel#callcc, after having +require+d continuation. They hold a return address and execution context, allowing a nonlocal return to the end of the callcc block from anywhere within a program. Continuations are somewhat analogous to a structured version of C’s setjmp/longjmp (although they contain more state, so you might consider them closer to threads).

For instance:

require "continuation"
arr = [ "Freddie", "Herbie", "Ron", "Max", "Ringo" ]
callcc{|cc| $cc = cc}
puts(message = arr.shift)
$cc.call unless message =~ /Max/

produces:

Freddie
Herbie
Ron
Max

Also you can call callcc in other methods:

require "continuation"

def g
  arr = [ "Freddie", "Herbie", "Ron", "Max", "Ringo" ]
  cc = callcc { |cc| cc }
  puts arr.shift
  return cc, arr.size
end

def f
  c, size = g
  c.call(c) if size > 1
end

f

This (somewhat contrived) example allows the inner loop to abandon processing early:

require "continuation"
callcc {|cont|
  for i in 0..4
    print "\n#{i}: "
    for j in i*5...(i+1)*5
      cont.call() if j == 17
      printf "%3d", j
    end
  end
}
puts

produces:

0:   0  1  2  3  4
1:   5  6  7  8  9
2:  10 11 12 13 14
3:  15 16

Raised to stop the iteration, in particular by Enumerator#next. It is rescued by Kernel#loop.

loop do
  puts "Hello"
  raise StopIteration
  puts "World"
end
puts "Done!"

produces:

Hello
Done!

ConditionVariable objects augment class Mutex. Using condition variables, it is possible to suspend while in the middle of a critical section until a resource becomes available.

Example:

mutex = Mutex.new
resource = ConditionVariable.new

a = Thread.new {
   mutex.synchronize {
     # Thread 'a' now needs the resource
     resource.wait(mutex)
     # 'a' can now have the resource
   }
}

b = Thread.new {
   mutex.synchronize {
     # Thread 'b' has finished using the resource
     resource.signal
   }
}

Helper module for easily defining exceptions with predefined messages.

Usage

1.

class Foo
  extend Exception2MessageMapper
  def_e2message ExistingExceptionClass, "message..."
  def_exception :NewExceptionClass, "message..."[, superclass]
  ...
end

2.

module Error
  extend Exception2MessageMapper
  def_e2message ExistingExceptionClass, "message..."
  def_exception :NewExceptionClass, "message..."[, superclass]
  ...
end
class Foo
  include Error
  ...
end

foo = Foo.new
foo.Fail ....

3.

module Error
  extend Exception2MessageMapper
  def_e2message ExistingExceptionClass, "message..."
  def_exception :NewExceptionClass, "message..."[, superclass]
  ...
end
class Foo
  extend Exception2MessageMapper
  include Error
  ...
end

Foo.Fail NewExceptionClass, arg...
Foo.Fail ExistingExceptionClass, arg...

Descendants of class Exception are used to communicate between Kernel#raise and rescue statements in begin ... end blocks. Exception objects carry information about the exception – its type (the exception’s class name), an optional descriptive string, and optional traceback information. Exception subclasses may add additional information like NameError#name.

Programs may make subclasses of Exception, typically of StandardError or RuntimeError, to provide custom classes and add additional information. See the subclass list below for defaults for raise and rescue.

When an exception has been raised but not yet handled (in rescue, ensure, at_exit and END blocks) the global variable $! will contain the current exception and $@ contains the current exception’s backtrace.

It is recommended that a library should have one subclass of StandardError or RuntimeError and have specific exception types inherit from it. This allows the user to rescue a generic exception type to catch all exceptions the library may raise even if future versions of the library add new exception subclasses.

For example:

class MyLibrary
  class Error < RuntimeError
  end

  class WidgetError < Error
  end

  class FrobError < Error
  end

end

To handle both WidgetError and FrobError the library user can rescue MyLibrary::Error.

The built-in subclasses of Exception are:

• NoMemoryError

• ScriptError

  • LoadError

  • NotImplementedError

  • SyntaxError

• SecurityError

• SignalException

  • Interrupt

• StandardError – default for rescue

  • ArgumentError

    • UncaughtThrowError

  • EncodingError

  • FiberError

  • IOError

    • EOFError

  • IndexError

    • KeyError

    • StopIteration

  • LocalJumpError

  • NameError

    • NoMethodError

  • RangeError

    • FloatDomainError

  • RegexpError

  • RuntimeError – default for raise

    • FrozenError

  • SystemCallError

    • Errno::*

  • ThreadError

  • TypeError

  • ZeroDivisionError

• SystemExit

• SystemStackError

• fatal – impossible to rescue

Raised when a signal is received.

begin
  Process.kill('HUP',Process.pid)
  sleep # wait for receiver to handle signal sent by Process.kill
rescue SignalException => e
  puts "received Exception #{e}"
end

produces:

received Exception SIGHUP

Raised when attempting to divide an integer by 0.

42 / 0   #=> ZeroDivisionError: divided by 0

Note that only division by an exact 0 will raise the exception:

42 /  0.0   #=> Float::INFINITY
42 / -0.0   #=> -Float::INFINITY
0  /  0.0   #=> NaN

A rational number can be represented as a pair of integer numbers: a/b (b>0), where a is the numerator and b is the denominator. Integer a equals rational a/1 mathematically.

In Ruby, you can create rational objects with the Kernel#Rational, to_r, or rationalize methods or by suffixing r to a literal. The return values will be irreducible fractions.

Rational(1)      #=> (1/1)
Rational(2, 3)   #=> (2/3)
Rational(4, -6)  #=> (-2/3)
3.to_r           #=> (3/1)
2/3r             #=> (2/3)

You can also create rational objects from floating-point numbers or strings.

Rational(0.3)    #=> (5404319552844595/18014398509481984)
Rational('0.3')  #=> (3/10)
Rational('2/3')  #=> (2/3)

0.3.to_r         #=> (5404319552844595/18014398509481984)
'0.3'.to_r       #=> (3/10)
'2/3'.to_r       #=> (2/3)
0.3.rationalize  #=> (3/10)

A rational object is an exact number, which helps you to write programs without any rounding errors.

10.times.inject(0) {|t| t + 0.1 }              #=> 0.9999999999999999
10.times.inject(0) {|t| t + Rational('0.1') }  #=> (1/1)

However, when an expression includes an inexact component (numerical value or operation), it will produce an inexact result.

Rational(10) / 3   #=> (10/3)
Rational(10) / 3.0 #=> 3.3333333333333335

Rational(-8) ** Rational(1, 3)
                   #=> (1.0000000000000002+1.7320508075688772i)

TCPServer represents a TCP/IP server socket.

A simple TCP server may look like:

require 'socket'

server = TCPServer.new 2000 # Server bind to port 2000
loop do
  client = server.accept    # Wait for a client to connect
  client.puts "Hello !"
  client.puts "Time is #{Time.now}"
  client.close
end

A more usable server (serving multiple clients):

require 'socket'

server = TCPServer.new 2000
loop do
  Thread.start(server.accept) do |client|
    client.puts "Hello !"
    client.puts "Time is #{Time.now}"
    client.close
  end
end

UNIXServer represents a UNIX domain stream server socket.

Raised when OLE processing failed.

EX:

obj = WIN32OLE.new("NonExistProgID")

raises the exception:

WIN32OLERuntimeError: unknown OLE server: `NonExistProgID'
    HRESULT error code:0x800401f3
      Invalid class string

The GetoptLong class allows you to parse command line options similarly to the GNU getopt_long() C library call. Note, however, that GetoptLong is a pure Ruby implementation.

GetoptLong allows for POSIX-style options like --file as well as single letter options like -f

The empty option -- (two minus symbols) is used to end option processing. This can be particularly important if options have optional arguments.

Here is a simple example of usage:

require 'getoptlong'

opts = GetoptLong.new(
  [ '--help', '-h', GetoptLong::NO_ARGUMENT ],
  [ '--repeat', '-n', GetoptLong::REQUIRED_ARGUMENT ],
  [ '--name', GetoptLong::OPTIONAL_ARGUMENT ]
)

dir = nil
name = nil
repetitions = 1
opts.each do |opt, arg|
  case opt
    when '--help'
      puts <<-EOF
hello [OPTION] ... DIR

-h, --help:
   show help

--repeat x, -n x:
   repeat x times

--name [name]:
   greet user by name, if name not supplied default is John

DIR: The directory in which to issue the greeting.
      EOF
    when '--repeat'
      repetitions = arg.to_i
    when '--name'
      if arg == ''
        name = 'John'
      else
        name = arg
      end
  end
end

if ARGV.length != 1
  puts "Missing dir argument (try --help)"
  exit 0
end

dir = ARGV.shift

Dir.chdir(dir)
for i in (1..repetitions)
  print "Hello"
  if name
    print ", #{name}"
  end
  puts
end

Example command line:

hello -n 6 --name -- /tmp

Mixin methods for –version and –platform Gem::Command options.

Raised when an invalid operation is attempted on a Fiber, in particular when attempting to call/resume a dead fiber, attempting to yield from the root fiber, or calling a fiber across threads.

fiber = Fiber.new{}
fiber.resume #=> nil
fiber.resume #=> FiberError: dead fiber called

Raised when the interrupt signal is received, typically because the user has pressed Control-C (on most posix platforms). As such, it is a subclass of SignalException.

begin
  puts "Press ctrl-C when you get bored"
  loop {}
rescue Interrupt => e
  puts "Note: You will typically use Signal.trap instead."
end

produces:

Press ctrl-C when you get bored

then waits until it is interrupted with Control-C and then prints:

Note: You will typically use Signal.trap instead.