Raised when the interrupt signal is received, typically because the user has pressed Control-C (on most posix platforms). As such, it is a subclass of SignalException.
begin puts "Press ctrl-C when you get bored" loop {} rescue Interrupt => e puts "Note: You will typically use Signal.trap instead." end
produces:
Press ctrl-C when you get bored
then waits until it is interrupted with Control-C and then prints:
Note: You will typically use Signal.trap instead.
Raised when encountering an object that is not of the expected type.
[1, 2, 3].first("two")
raises the exception:
TypeError: no implicit conversion of String into Integer
Raised when the given index is invalid.
a = [:foo, :bar] a.fetch(0) #=> :foo a[4] #=> nil a.fetch(4) #=> IndexError: index 4 outside of array bounds: -2...2
Raised when the specified key is not found. It is a subclass of IndexError.
h = {"foo" => :bar} h.fetch("foo") #=> :bar h.fetch("baz") #=> KeyError: key not found: "baz"
ScriptError is the superclass for errors raised when a script can not be executed because of a LoadError, NotImplementedError or a SyntaxError. Note these type of ScriptErrors are not StandardError and will not be rescued unless it is specified explicitly (or its ancestor Exception).
Raised when encountering Ruby code with an invalid syntax.
eval("1+1=2")
raises the exception:
SyntaxError: (eval):1: syntax error, unexpected '=', expecting $end
Raised when a file required (a Ruby script, extension library, …) fails to load.
require 'this/file/does/not/exist'
raises the exception:
LoadError: no such file to load -- this/file/does/not/exist
Raised when a feature is not implemented on the current platform. For example, methods depending on the fsync or fork system calls may raise this exception if the underlying operating system or Ruby runtime does not support them.
Note that if fork raises a NotImplementedError, then respond_to?(:fork) returns false.
Raised when a given name is invalid or undefined.
puts foo
raises the exception:
NameError: undefined local variable or method `foo' for main:Object
Since constant names must start with a capital:
Integer.const_set :answer, 42
raises the exception:
NameError: wrong constant name answer
Raised when a method is called on a receiver which doesn’t have it defined and also fails to respond with method_missing.
"hello".to_ary
raises the exception:
NoMethodError: undefined method `to_ary' for "hello":String
A generic error class raised when an invalid operation is attempted. Kernel#raise will raise a RuntimeError if no Exception class is specified.
raise "ouch"
raises the exception:
RuntimeError: ouch
Raised when attempting a potential unsafe operation, typically when the $SAFE level is raised above 0.
foo = "bar" proc = Proc.new do $SAFE = 3 foo.untaint end proc.call
raises the exception:
SecurityError: Insecure: Insecure operation `untaint' at level 3
Raised when memory allocation fails.
EncodingError is the base class for encoding errors.
SystemCallError is the base class for all low-level platform-dependent errors.
The errors available on the current platform are subclasses of SystemCallError and are defined in the Errno module.
File.open("does/not/exist")
raises the exception:
Errno::ENOENT: No such file or directory - does/not/exist
A rational number can be represented as a pair of integer numbers: a/b (b>0), where a is the numerator and b is the denominator. Integer a equals rational a/1 mathematically.
In Ruby, you can create rational objects with the Kernel#Rational, to_r, or rationalize methods or by suffixing r to a literal. The return values will be irreducible fractions.
Rational(1) #=> (1/1) Rational(2, 3) #=> (2/3) Rational(4, -6) #=> (-2/3) 3.to_r #=> (3/1) 2/3r #=> (2/3)
You can also create rational objects from floating-point numbers or strings.
Rational(0.3) #=> (5404319552844595/18014398509481984) Rational('0.3') #=> (3/10) Rational('2/3') #=> (2/3) 0.3.to_r #=> (5404319552844595/18014398509481984) '0.3'.to_r #=> (3/10) '2/3'.to_r #=> (2/3) 0.3.rationalize #=> (3/10)
A rational object is an exact number, which helps you to write programs without any rounding errors.
10.times.inject(0) {|t| t + 0.1 } #=> 0.9999999999999999 10.times.inject(0) {|t| t + Rational('0.1') } #=> (1/1)
However, when an expression includes an inexact component (numerical value or operation), it will produce an inexact result.
Rational(10) / 3 #=> (10/3) Rational(10) / 3.0 #=> 3.3333333333333335 Rational(-8) ** Rational(1, 3) #=> (1.0000000000000002+1.7320508075688772i)
A Range represents an interval—a set of values with a beginning and an end. Ranges may be constructed using the s..e and s...e literals, or with Range::new. Ranges constructed using .. run from the beginning to the end inclusively. Those created using ... exclude the end value. When used as an iterator, ranges return each value in the sequence.
(-1..-5).to_a #=> [] (-5..-1).to_a #=> [-5, -4, -3, -2, -1] ('a'..'e').to_a #=> ["a", "b", "c", "d", "e"] ('a'...'e').to_a #=> ["a", "b", "c", "d"]
An “endless range” represents a semi-infinite range. Literal notation for an endless range is:
(1..) # or similarly (1...)
Which is equivalent to
(1..nil) # or similarly (1...nil) Range.new(1, nil) # or Range.new(1, nil, true)
Endless ranges are useful, for example, for idiomatic slicing of arrays:
[1, 2, 3, 4, 5][2...] # => [3, 4, 5]
Some implementation details:
end of endless range is nil;
each of endless range enumerates infinite sequence (may be useful in combination with Enumerable#take_while or similar methods);
(1..) and (1...) are not equal, although technically representing the same sequence.
Ranges can be constructed using any objects that can be compared using the <=> operator. Methods that treat the range as a sequence (each and methods inherited from Enumerable) expect the begin object to implement a succ method to return the next object in sequence. The step and include? methods require the begin object to implement succ or to be numeric.
In the Xs class below both <=> and succ are implemented so Xs can be used to construct ranges. Note that the Comparable module is included so the == method is defined in terms of <=>.
class Xs # represent a string of 'x's include Comparable attr :length def initialize(n) @length = n end def succ Xs.new(@length + 1) end def <=>(other) @length <=> other.length end def to_s sprintf "%2d #{inspect}", @length end def inspect 'x' * @length end end
An example of using Xs to construct a range:
r = Xs.new(3)..Xs.new(6) #=> xxx..xxxxxx r.to_a #=> [xxx, xxxx, xxxxx, xxxxxx] r.member?(Xs.new(5)) #=> true
SocketError is the error class for socket.
StringScanner provides for lexical scanning operations on a String. Here is an example of its usage:
s = StringScanner.new('This is an example string') s.eos? # -> false p s.scan(/\w+/) # -> "This" p s.scan(/\w+/) # -> nil p s.scan(/\s+/) # -> " " p s.scan(/\s+/) # -> nil p s.scan(/\w+/) # -> "is" s.eos? # -> false p s.scan(/\s+/) # -> " " p s.scan(/\w+/) # -> "an" p s.scan(/\s+/) # -> " " p s.scan(/\w+/) # -> "example" p s.scan(/\s+/) # -> " " p s.scan(/\w+/) # -> "string" s.eos? # -> true p s.scan(/\s+/) # -> nil p s.scan(/\w+/) # -> nil
Scanning a string means remembering the position of a scan pointer, which is just an index. The point of scanning is to move forward a bit at a time, so matches are sought after the scan pointer; usually immediately after it.
Given the string “test string”, here are the pertinent scan pointer positions:
t e s t s t r i n g
0 1 2 ... 1
0
When you scan for a pattern (a regular expression), the match must occur at the character after the scan pointer. If you use scan_until, then the match can occur anywhere after the scan pointer. In both cases, the scan pointer moves just beyond the last character of the match, ready to scan again from the next character onwards. This is demonstrated by the example above.
Method Categories There are other methods besides the plain scanners. You can look ahead in the string without actually scanning. You can access the most recent match. You can modify the string being scanned, reset or terminate the scanner, find out or change the position of the scan pointer, skip ahead, and so on.
beginning_of_line? (bol?)
Data There are aliases to several of the methods.
Raised when OLE processing failed.
EX:
obj = WIN32OLE.new("NonExistProgID")
raises the exception:
WIN32OLERuntimeError: unknown OLE server: `NonExistProgID'
HRESULT error code:0x800401f3
Invalid class string