Try to convert obj into a Regexp, using to_regexp method. Returns converted regexp or nil if obj cannot be converted for any reason.
Regexp.try_convert(/re/) #=> /re/ Regexp.try_convert("re") #=> nil o = Object.new Regexp.try_convert(o) #=> nil def o.to_regexp() /foo/ end Regexp.try_convert(o) #=> /foo/
Returns a hash, that will be turned into a JSON object and represent this object.
Receives up to maxlen bytes from socket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The first element of the results, mesg, is the data received. The second element, sender_addrinfo, contains protocol-specific address information of the sender.
When recvfrom(2) returns 0, Socket#recvfrom_nonblock returns an empty string as data. The meaning depends on the socket: EOF on TCP, empty packet on UDP, etc.
maxlen - the maximum number of bytes to receive from the socket
flags - zero or more of the MSG_ options
outbuf - destination String buffer
opts - keyword hash, supporting ‘exception: false`
# In one file, start this first require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.bind(sockaddr) socket.listen(5) client, client_addrinfo = socket.accept begin # emulate blocking recvfrom pair = client.recvfrom_nonblock(20) rescue IO::WaitReadable IO.select([client]) retry end data = pair[0].chomp puts "I only received 20 bytes '#{data}'" sleep 1 socket.close # In another file, start this second require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.connect(sockaddr) socket.puts "Watch this get cut short!" socket.close
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recvfrom_nonblock fails.
Socket#recvfrom_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recvfrom_nonblock.
By specifying a keyword argument exception to false, you can indicate that recvfrom_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Accepts an incoming connection using accept(2) after O_NONBLOCK is set for the underlying file descriptor. It returns an array containing the accepted socket for the incoming connection, client_socket, and an Addrinfo, client_addrinfo.
# In one script, start this first require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.bind(sockaddr) socket.listen(5) begin # emulate blocking accept client_socket, client_addrinfo = socket.accept_nonblock rescue IO::WaitReadable, Errno::EINTR IO.select([socket]) retry end puts "The client said, '#{client_socket.readline.chomp}'" client_socket.puts "Hello from script one!" socket.close # In another script, start this second require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.connect(sockaddr) socket.puts "Hello from script 2." puts "The server said, '#{socket.readline.chomp}'" socket.close
Refer to Socket#accept for the exceptions that may be thrown if the call to accept_nonblock fails.
Socket#accept_nonblock may raise any error corresponding to accept(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK, Errno::EAGAIN, Errno::ECONNABORTED or Errno::EPROTO, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying accept_nonblock.
By specifying a keyword argument exception to false, you can indicate that accept_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Packs path as an AF_UNIX sockaddr string.
Socket.sockaddr_un("/tmp/sock") #=> "\x01\x00/tmp/sock\x00\x00..."
sendmsg_nonblock sends a message using sendmsg(2) system call in non-blocking manner.
It is similar to BasicSocket#sendmsg but the non-blocking flag is set before the system call and it doesn’t retry the system call.
By specifying a keyword argument exception to false, you can indicate that sendmsg_nonblock should not raise an IO::WaitWritable exception, but return the symbol :wait_writable instead.
Receives up to maxlen bytes from socket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The result, mesg, is the data received.
When recvfrom(2) returns 0, Socket#recv_nonblock returns an empty string as data. The meaning depends on the socket: EOF on TCP, empty packet on UDP, etc.
maxlen - the number of bytes to receive from the socket
flags - zero or more of the MSG_ options
buf - destination String buffer
options - keyword hash, supporting ‘exception: false`
serv = TCPServer.new("127.0.0.1", 0) af, port, host, addr = serv.addr c = TCPSocket.new(addr, port) s = serv.accept c.send "aaa", 0 begin # emulate blocking recv. p s.recv_nonblock(10) #=> "aaa" rescue IO::WaitReadable IO.select([s]) retry end
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recv_nonblock fails.
BasicSocket#recv_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recv_nonblock.
By specifying a keyword argument exception to false, you can indicate that recv_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
recvmsg receives a message using recvmsg(2) system call in non-blocking manner.
It is similar to BasicSocket#recvmsg but non-blocking flag is set before the system call and it doesn’t retry the system call.
By specifying a keyword argument exception to false, you can indicate that recvmsg_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
returns a string which shows the sockaddr in addrinfo with human-readable form.
Addrinfo.tcp("localhost", 80).inspect_sockaddr #=> "127.0.0.1:80" Addrinfo.tcp("ip6-localhost", 80).inspect_sockaddr #=> "[::1]:80" Addrinfo.unix("/tmp/sock").inspect_sockaddr #=> "/tmp/sock"
Returns the IP address and port number as 2-element array.
Addrinfo.tcp("127.0.0.1", 80).ip_unpack #=> ["127.0.0.1", 80] Addrinfo.tcp("::1", 80).ip_unpack #=> ["::1", 80]
Returns true for IPv6 unspecified address (::). It returns false otherwise.
Returns the socket path as a string.
Addrinfo.unix("/tmp/sock").unix_path #=> "/tmp/sock"
Receives up to maxlen bytes from udpsocket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The first element of the results, mesg, is the data received. The second element, sender_inet_addr, is an array to represent the sender address.
When recvfrom(2) returns 0, Socket#recvfrom_nonblock returns an empty string as data. It means an empty packet.
maxlen - the number of bytes to receive from the socket
flags - zero or more of the MSG_ options
outbuf - destination String buffer
options - keyword hash, supporting ‘exception: false`
require 'socket' s1 = UDPSocket.new s1.bind("127.0.0.1", 0) s2 = UDPSocket.new s2.bind("127.0.0.1", 0) s2.connect(*s1.addr.values_at(3,1)) s1.connect(*s2.addr.values_at(3,1)) s1.send "aaa", 0 begin # emulate blocking recvfrom p s2.recvfrom_nonblock(10) #=> ["aaa", ["AF_INET", 33302, "localhost.localdomain", "127.0.0.1"]] rescue IO::WaitReadable IO.select([s2]) retry end
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recvfrom_nonblock fails.
UDPSocket#recvfrom_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recvfrom_nonblock.
By specifying a keyword argument exception to false, you can indicate that recvfrom_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Accepts an incoming connection using accept(2) after O_NONBLOCK is set for the underlying file descriptor. It returns an accepted TCPSocket for the incoming connection.
require 'socket' serv = TCPServer.new(2202) begin # emulate blocking accept sock = serv.accept_nonblock rescue IO::WaitReadable, Errno::EINTR IO.select([serv]) retry end # sock is an accepted socket.
Refer to Socket#accept for the exceptions that may be thrown if the call to TCPServer#accept_nonblock fails.
TCPServer#accept_nonblock may raise any error corresponding to accept(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK, Errno::EAGAIN, Errno::ECONNABORTED, Errno::EPROTO, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying accept_nonblock.
By specifying a keyword argument exception to false, you can indicate that accept_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Accepts an incoming connection using accept(2) after O_NONBLOCK is set for the underlying file descriptor. It returns an accepted UNIXSocket for the incoming connection.
require 'socket' serv = UNIXServer.new("/tmp/sock") begin # emulate blocking accept sock = serv.accept_nonblock rescue IO::WaitReadable, Errno::EINTR IO.select([serv]) retry end # sock is an accepted socket.
Refer to Socket#accept for the exceptions that may be thrown if the call to UNIXServer#accept_nonblock fails.
UNIXServer#accept_nonblock may raise any error corresponding to accept(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK, Errno::EAGAIN, Errno::ECONNABORTED or Errno::EPROTO, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying accept_nonblock.
By specifying a keyword argument exception to false, you can indicate that accept_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Sends io as file descriptor passing.
s1, s2 = UNIXSocket.pair s1.send_io STDOUT stdout = s2.recv_io p STDOUT.fileno #=> 1 p stdout.fileno #=> 6 stdout.puts "hello" # outputs "hello\n" to standard output.
io may be any kind of IO object or integer file descriptor.
Example
UNIXServer.open("/tmp/sock") {|serv| UNIXSocket.open("/tmp/sock") {|c| s = serv.accept c.send_io STDOUT stdout = s.recv_io p STDOUT.fileno #=> 1 p stdout.fileno #=> 7 stdout.puts "hello" # outputs "hello\n" to standard output. } }
klass will determine the class of io returned (using the IO.for_fd singleton method or similar). If klass is nil, an integer file descriptor is returned.
mode is the same as the argument passed to IO.for_fd
Duplicates a StringScanner object.
Defines the constants of OLE Automation server as mod’s constants. The first argument is WIN32OLE object or type library name. If 2nd argument is omitted, the default is WIN32OLE. The first letter of Ruby’s constant variable name is upper case, so constant variable name of WIN32OLE object is capitalized. For example, the ‘xlTop’ constant of Excel is changed to ‘XlTop’ in WIN32OLE. If the first letter of constant variable is not [A-Z], then the constant is defined as CONSTANTS hash element.
module EXCEL_CONST end excel = WIN32OLE.new('Excel.Application') WIN32OLE.const_load(excel, EXCEL_CONST) puts EXCEL_CONST::XlTop # => -4160 puts EXCEL_CONST::CONSTANTS['_xlDialogChartSourceData'] # => 541 WIN32OLE.const_load(excel) puts WIN32OLE::XlTop # => -4160 module MSO end WIN32OLE.const_load('Microsoft Office 9.0 Object Library', MSO) puts MSO::MsoLineSingle # => 1
Defines the callback event. If argument is omitted, this method defines the callback of all events. If you want to modify reference argument in callback, return hash in callback. If you want to return value to OLE server as result of callback use ‘return’ or :return.
ie = WIN32OLE.new('InternetExplorer.Application')
ev = WIN32OLE_EVENT.new(ie)
ev.on_event("NavigateComplete") {|url| puts url}
ev.on_event() {|ev, *args| puts "#{ev} fired"}
ev.on_event("BeforeNavigate2") {|*args|
...
# set true to BeforeNavigate reference argument `Cancel'.
# Cancel is 7-th argument of BeforeNavigate,
# so you can use 6 as key of hash instead of 'Cancel'.
# The argument is counted from 0.
# The hash key of 0 means first argument.)
{:Cancel => true} # or {'Cancel' => true} or {6 => true}
}
ev.on_event(...) {|*args|
{:return => 1, :xxx => yyy}
}
Evaluates a string containing Ruby source code, or the given block, within the context of the receiver (obj). In order to set the context, the variable self is set to obj while the code is executing, giving the code access to obj’s instance variables and private methods.
When instance_eval is given a block, obj is also passed in as the block’s only argument.
When instance_eval is given a String, the optional second and third parameters supply a filename and starting line number that are used when reporting compilation errors.
class KlassWithSecret def initialize @secret = 99 end private def the_secret "Ssssh! The secret is #{@secret}." end end k = KlassWithSecret.new k.instance_eval { @secret } #=> 99 k.instance_eval { the_secret } #=> "Ssssh! The secret is 99." k.instance_eval {|obj| obj == self } #=> true
Executes the given block within the context of the receiver (obj). In order to set the context, the variable self is set to obj while the code is executing, giving the code access to obj’s instance variables. Arguments are passed as block parameters.
class KlassWithSecret def initialize @secret = 99 end end k = KlassWithSecret.new k.instance_exec(5) {|x| @secret+x } #=> 104