Results for: "to_proc"

Encoding::Converter#primitive_errinfo

primitive_errinfo returns important information regarding the last error as a 5-element array:

[result, enc1, enc2, error_bytes, readagain_bytes]

result is the last result of primitive_convert.

Other elements are only meaningful when result is :invalid_byte_sequence, :incomplete_input or :undefined_conversion.

enc1 and enc2 indicate a conversion step as a pair of strings. For example, a converter from EUC-JP to ISO-8859-1 converts a string as follows: EUC-JP -> UTF-8 -> ISO-8859-1. So [enc1, enc2] is either [“EUC-JP”, “UTF-8”] or [“UTF-8”, “ISO-8859-1”].

error_bytes and readagain_bytes indicate the byte sequences which caused the error. error_bytes is discarded portion. readagain_bytes is buffered portion which is read again on next conversion.

Example:

# \xff is invalid as EUC-JP.
ec = Encoding::Converter.new("EUC-JP", "Shift_JIS")
ec.primitive_convert(src="\xff", dst="", nil, 10)
p ec.primitive_errinfo
#=> [:invalid_byte_sequence, "EUC-JP", "UTF-8", "\xFF", ""]

# HIRAGANA LETTER A (\xa4\xa2 in EUC-JP) is not representable in ISO-8859-1.
# Since this error is occur in UTF-8 to ISO-8859-1 conversion,
# error_bytes is HIRAGANA LETTER A in UTF-8 (\xE3\x81\x82).
ec = Encoding::Converter.new("EUC-JP", "ISO-8859-1")
ec.primitive_convert(src="\xa4\xa2", dst="", nil, 10)
p ec.primitive_errinfo
#=> [:undefined_conversion, "UTF-8", "ISO-8859-1", "\xE3\x81\x82", ""]

# partial character is invalid
ec = Encoding::Converter.new("EUC-JP", "ISO-8859-1")
ec.primitive_convert(src="\xa4", dst="", nil, 10)
p ec.primitive_errinfo
#=> [:incomplete_input, "EUC-JP", "UTF-8", "\xA4", ""]

# Encoding::Converter::PARTIAL_INPUT prevents invalid errors by
# partial characters.
ec = Encoding::Converter.new("EUC-JP", "ISO-8859-1")
ec.primitive_convert(src="\xa4", dst="", nil, 10, Encoding::Converter::PARTIAL_INPUT)
p ec.primitive_errinfo
#=> [:source_buffer_empty, nil, nil, nil, nil]

# \xd8\x00\x00@ is invalid as UTF-16BE because
# no low surrogate after high surrogate (\xd8\x00).
# It is detected by 3rd byte (\00) which is part of next character.
# So the high surrogate (\xd8\x00) is discarded and
# the 3rd byte is read again later.
# Since the byte is buffered in ec, it is dropped from src.
ec = Encoding::Converter.new("UTF-16BE", "UTF-8")
ec.primitive_convert(src="\xd8\x00\x00@", dst="", nil, 10)
p ec.primitive_errinfo
#=> [:invalid_byte_sequence, "UTF-16BE", "UTF-8", "\xD8\x00", "\x00"]
p src
#=> "@"

# Similar to UTF-16BE, \x00\xd8@\x00 is invalid as UTF-16LE.
# The problem is detected by 4th byte.
ec = Encoding::Converter.new("UTF-16LE", "UTF-8")
ec.primitive_convert(src="\x00\xd8@\x00", dst="", nil, 10)
p ec.primitive_errinfo
#=> [:invalid_byte_sequence, "UTF-16LE", "UTF-8", "\x00\xD8", "@\x00"]
p src
#=> ""

Encoding::Converter#last_error

Returns an exception object for the last conversion. Returns nil if the last conversion did not produce an error.

“error” means that Encoding::InvalidByteSequenceError and Encoding::UndefinedConversionError for Encoding::Converter#convert and :invalid_byte_sequence, :incomplete_input and :undefined_conversion for Encoding::Converter#primitive_convert.

ec = Encoding::Converter.new("utf-8", "iso-8859-1")
p ec.primitive_convert(src="\xf1abcd", dst="")       #=> :invalid_byte_sequence
p ec.last_error      #=> #<Encoding::InvalidByteSequenceError: "\xF1" followed by "a" on UTF-8>
p ec.primitive_convert(src, dst, nil, 1)             #=> :destination_buffer_full
p ec.last_error      #=> nil

Digest::Instance#block_length

Returns the block length of the digest.

This method is overridden by each implementation subclass.

IO::generic_readable#read_nonblock

Similar to read, but raises EOFError at end of string unless the +exception: false+ option is passed in.

OpenSSL::Buffering#read_nonblock

Reads at most maxlen bytes in the non-blocking manner.

When no data can be read without blocking it raises OpenSSL::SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.

IO::WaitReadable means SSL needs to read internally so read_nonblock should be called again when the underlying IO is readable.

IO::WaitWritable means SSL needs to write internally so read_nonblock should be called again after the underlying IO is writable.

OpenSSL::Buffering#read_nonblock needs two rescue clause as follows:

# emulates blocking read (readpartial).
begin
  result = ssl.read_nonblock(maxlen)
rescue IO::WaitReadable
  IO.select([io])
  retry
rescue IO::WaitWritable
  IO.select(nil, [io])
  retry
end

Note that one reason that read_nonblock writes to the underlying IO is when the peer requests a new TLS/SSL handshake. See openssl the FAQ for more details. www.openssl.org/support/faq.html

By specifying a keyword argument exception to false, you can indicate that read_nonblock should not raise an IO::Wait*able exception, but return the symbol :wait_writable or :wait_readable instead. At EOF, it will return nil instead of raising EOFError.

OpenSSL::Buffering#write_nonblock

Writes s in the non-blocking manner.

If there is buffered data, it is flushed first. This may block.

write_nonblock returns number of bytes written to the SSL connection.

When no data can be written without blocking it raises OpenSSL::SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.

IO::WaitReadable means SSL needs to read internally so write_nonblock should be called again after the underlying IO is readable.

IO::WaitWritable means SSL needs to write internally so write_nonblock should be called again after underlying IO is writable.

So OpenSSL::Buffering#write_nonblock needs two rescue clause as follows.

# emulates blocking write.
begin
  result = ssl.write_nonblock(str)
rescue IO::WaitReadable
  IO.select([io])
  retry
rescue IO::WaitWritable
  IO.select(nil, [io])
  retry
end

Note that one reason that write_nonblock reads from the underlying IO is when the peer requests a new TLS/SSL handshake. See the openssl FAQ for more details. www.openssl.org/support/faq.html

By specifying a keyword argument exception to false, you can indicate that write_nonblock should not raise an IO::Wait*able exception, but return the symbol :wait_writable or :wait_readable instead.

IO::generic_writable#write_nonblock

No documentation available

CGI::HtmlExtension#checkbox_group

Generate a sequence of checkbox elements, as a String.

The checkboxes will all have the same name attribute. Each checkbox is followed by a label. There will be one checkbox for each value. Each value can be specified as a String, which will be used both as the value of the VALUE attribute and as the label for that checkbox. A single-element array has the same effect.

Each value can also be specified as a three-element array. The first element is the VALUE attribute; the second is the label; and the third is a boolean specifying whether this checkbox is CHECKED.

Each value can also be specified as a two-element array, by omitting either the value element (defaults to the same as the label), or the boolean checked element (defaults to false).

checkbox_group("name", "foo", "bar", "baz")
  # <INPUT TYPE="checkbox" NAME="name" VALUE="foo">foo
  # <INPUT TYPE="checkbox" NAME="name" VALUE="bar">bar
  # <INPUT TYPE="checkbox" NAME="name" VALUE="baz">baz

checkbox_group("name", ["foo"], ["bar", true], "baz")
  # <INPUT TYPE="checkbox" NAME="name" VALUE="foo">foo
  # <INPUT TYPE="checkbox" CHECKED NAME="name" VALUE="bar">bar
  # <INPUT TYPE="checkbox" NAME="name" VALUE="baz">baz

checkbox_group("name", ["1", "Foo"], ["2", "Bar", true], "Baz")
  # <INPUT TYPE="checkbox" NAME="name" VALUE="1">Foo
  # <INPUT TYPE="checkbox" CHECKED NAME="name" VALUE="2">Bar
  # <INPUT TYPE="checkbox" NAME="name" VALUE="Baz">Baz

checkbox_group("NAME" => "name",
                 "VALUES" => ["foo", "bar", "baz"])

checkbox_group("NAME" => "name",
                 "VALUES" => [["foo"], ["bar", true], "baz"])

checkbox_group("NAME" => "name",
                 "VALUES" => [["1", "Foo"], ["2", "Bar", true], "Baz"])

CGI::HtmlExtension#radio_group

Generate a sequence of radio button Input elements, as a String.

This works the same as checkbox_group(). However, it is not valid to have more than one radiobutton in a group checked.

radio_group("name", "foo", "bar", "baz")
  # <INPUT TYPE="radio" NAME="name" VALUE="foo">foo
  # <INPUT TYPE="radio" NAME="name" VALUE="bar">bar
  # <INPUT TYPE="radio" NAME="name" VALUE="baz">baz

radio_group("name", ["foo"], ["bar", true], "baz")
  # <INPUT TYPE="radio" NAME="name" VALUE="foo">foo
  # <INPUT TYPE="radio" CHECKED NAME="name" VALUE="bar">bar
  # <INPUT TYPE="radio" NAME="name" VALUE="baz">baz

radio_group("name", ["1", "Foo"], ["2", "Bar", true], "Baz")
  # <INPUT TYPE="radio" NAME="name" VALUE="1">Foo
  # <INPUT TYPE="radio" CHECKED NAME="name" VALUE="2">Bar
  # <INPUT TYPE="radio" NAME="name" VALUE="Baz">Baz

radio_group("NAME" => "name",
              "VALUES" => ["foo", "bar", "baz"])

radio_group("NAME" => "name",
              "VALUES" => [["foo"], ["bar", true], "baz"])

radio_group("NAME" => "name",
              "VALUES" => [["1", "Foo"], ["2", "Bar", true], "Baz"])

CGI::HtmlExtension#scrolling_list

No documentation available

PP::PPMethods#object_group

A convenience method which is same as follows:

group(1, '#<' + obj.class.name, '>') { ... }

REXML::Functions::local_name

UNTESTED

REXML::SAX2Listener#start_document

No documentation available

REXML::SAX2Listener#end_document

No documentation available

REXML::StreamListener#doctype_end

Called when the doctype is done

Gem::BundlerVersionFinder::lockfile_version

No documentation available

Gem::BundlerVersionFinder::lockfile_contents

No documentation available

Gem::UserInteraction#alert_error

Displays an error statement to the error output location. Asks a question if given.

WEBrick::HTTPStatus#client_error?

Is code a client error status?

WEBrick::HTTPStatus#server_error?

Is code a server error status?

WEBrick::HTTPStatus::client_error?

Is code a client error status?

WEBrick::HTTPStatus::server_error?

Is code a server error status?

Module#private_instance_methods

Returns a list of the private instance methods defined in mod. If the optional parameter is false, the methods of any ancestors are not included.

module Mod
  def method1()  end
  private :method1
  def method2()  end
end
Mod.instance_methods           #=> [:method2]
Mod.private_instance_methods   #=> [:method1]

Module#private_method_defined?

Returns true if the named private method is defined by _ mod_ (or its included modules and, if mod is a class, its ancestors). String arguments are converted to symbols.

module A
  def method1()  end
end
class B
  private
  def method2()  end
end
class C < B
  include A
  def method3()  end
end

A.method_defined? :method1            #=> true
C.private_method_defined? "method1"   #=> false
C.private_method_defined? "method2"   #=> true
C.method_defined? "method2"           #=> false

Module#private_class_method

Makes existing class methods private. Often used to hide the default constructor new.

String arguments are converted to symbols.

class SimpleSingleton  # Not thread safe
  private_class_method :new
  def SimpleSingleton.create(*args, &block)
    @me = new(*args, &block) if ! @me
    @me
  end
end
Previous Next
Search took: 5ms  ·  Total Results: 1909