Returns default external encoding.
The default external encoding is used by default for strings created from the following locations:
File data read from disk
While strings created from these locations will have this encoding, the encoding may not be valid. Be sure to check String#valid_encoding?.
File data written to disk will be transcoded to the default external encoding when written.
The default external encoding is initialized by the locale or -E option.
Sets default external encoding. You should not set Encoding::default_external in ruby code as strings created before changing the value may have a different encoding from strings created after the value was changed., instead you should use ruby -E to invoke ruby with the correct default_external.
See Encoding::default_external for information on how the default external encoding is used.
Returns default internal encoding. Strings will be transcoded to the default internal encoding in the following places if the default internal encoding is not nil:
File data read from disk
Strings returned from Readline
Strings returned from SDBM
Values from ENV
Values in ARGV including $PROGRAM_NAME
Additionally String#encode and String#encode! use the default internal encoding if no encoding is given.
The locale encoding (__ENCODING__), not default_internal, is used as the encoding of created strings.
Encoding::default_internal is initialized by the source file’s internal_encoding or -E option.
Sets default internal encoding or removes default internal encoding when passed nil. You should not set Encoding::default_internal in ruby code as strings created before changing the value may have a different encoding from strings created after the change. Instead you should use ruby -E to invoke ruby with the correct default_internal.
See Encoding::default_internal for information on how the default internal encoding is used.
Returns the locale charmap name. It returns nil if no appropriate information.
Debian GNU/Linux LANG=C Encoding.locale_charmap #=> "ANSI_X3.4-1968" LANG=ja_JP.EUC-JP Encoding.locale_charmap #=> "EUC-JP" SunOS 5 LANG=C Encoding.locale_charmap #=> "646" LANG=ja Encoding.locale_charmap #=> "eucJP"
The result is highly platform dependent. So Encoding.find(Encoding.locale_charmap) may cause an error. If you need some encoding object even for unknown locale, Encoding.find(“locale”) can be used.
Returns formatted string of exception. The returned string is formatted using the same format that Ruby uses when printing an uncaught exceptions to stderr.
If highlight is true the default error handler will send the messages to a tty.
order must be either of :top or :bottom, and places the error message and the innermost backtrace come at the top or the bottom.
The default values of these options depend on $stderr and its tty? at the timing of a call.
Returns any backtrace associated with the exception. This method is similar to Exception#backtrace, but the backtrace is an array of Thread::Backtrace::Location.
Now, this method is not affected by Exception#set_backtrace().
Return a list of the local variable names defined where this NameError exception was raised.
Internal use only.
Creates instance variables and corresponding methods that return the value of each instance variable. Equivalent to calling “attr:name” on each name in turn. String arguments are converted to symbols.
Creates an accessor method to allow assignment to the attribute symbol.id2name. String arguments are converted to symbols.
Checks for a constant with the given name in mod. If inherit is set, the lookup will also search the ancestors (and Object if mod is a Module).
The value of the constant is returned if a definition is found, otherwise a NameError is raised.
Math.const_get(:PI) #=> 3.14159265358979
This method will recursively look up constant names if a namespaced class name is provided. For example:
module Foo; class Bar; end end Object.const_get 'Foo::Bar'
The inherit flag is respected on each lookup. For example:
module Foo class Bar VAL = 10 end class Baz < Bar; end end Object.const_get 'Foo::Baz::VAL' # => 10 Object.const_get 'Foo::Baz::VAL', false # => NameError
If the argument is not a valid constant name a NameError will be raised with a warning “wrong constant name”.
Object.const_get 'foobar' #=> NameError: wrong constant name foobar
Returns true if the given week date is valid, and false if not.
Date.valid_commercial?(2001,5,6) #=> true Date.valid_commercial?(2001,5,8) #=> false
See also ::jd and ::commercial.
Try to convert obj into an IO, using to_io method. Returns converted IO or nil if obj cannot be converted for any reason.
IO.try_convert(STDOUT) #=> STDOUT IO.try_convert("STDOUT") #=> nil require 'zlib' f = open("/tmp/zz.gz") #=> #<File:/tmp/zz.gz> z = Zlib::GzipReader.open(f) #=> #<Zlib::GzipReader:0x81d8744> IO.try_convert(z) #=> #<File:/tmp/zz.gz>
Closes the read end of a duplex I/O stream (i.e., one that contains both a read and a write stream, such as a pipe). Will raise an IOError if the stream is not duplexed.
f = IO.popen("/bin/sh","r+") f.close_read f.readlines
produces:
prog.rb:3:in `readlines': not opened for reading (IOError) from prog.rb:3
Calling this method on closed IO object is just ignored since Ruby 2.3.
Closes the write end of a duplex I/O stream (i.e., one that contains both a read and a write stream, such as a pipe). Will raise an IOError if the stream is not duplexed.
f = IO.popen("/bin/sh","r+") f.close_write f.print "nowhere"
produces:
prog.rb:3:in `write': not opened for writing (IOError) from prog.rb:3:in `print' from prog.rb:3
Calling this method on closed IO object is just ignored since Ruby 2.3.
Returns the Encoding object that represents the encoding of the file. If io is in write mode and no encoding is specified, returns nil.
Returns the Encoding of the internal string if conversion is specified. Otherwise returns nil.
Reads at most maxlen bytes from ios using the read(2) system call after O_NONBLOCK is set for the underlying file descriptor.
If the optional outbuf argument is present, it must reference a String, which will receive the data. The outbuf will contain only the received data after the method call even if it is not empty at the beginning.
read_nonblock just calls the read(2) system call. It causes all errors the read(2) system call causes: Errno::EWOULDBLOCK, Errno::EINTR, etc. The caller should care such errors.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying read_nonblock.
read_nonblock causes EOFError on EOF.
If the read byte buffer is not empty, read_nonblock reads from the buffer like readpartial. In this case, the read(2) system call is not called.
When read_nonblock raises an exception kind of IO::WaitReadable, read_nonblock should not be called until io is readable for avoiding busy loop. This can be done as follows.
# emulates blocking read (readpartial). begin result = io.read_nonblock(maxlen) rescue IO::WaitReadable IO.select([io]) retry end
Although IO#read_nonblock doesn’t raise IO::WaitWritable. OpenSSL::Buffering#read_nonblock can raise IO::WaitWritable. If IO and SSL should be used polymorphically, IO::WaitWritable should be rescued too. See the document of OpenSSL::Buffering#read_nonblock for sample code.
Note that this method is identical to readpartial except the non-blocking flag is set.
By specifying a keyword argument exception to false, you can indicate that read_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead. At EOF, it will return nil instead of raising EOFError.
Writes the given string to ios using the write(2) system call after O_NONBLOCK is set for the underlying file descriptor.
It returns the number of bytes written.
write_nonblock just calls the write(2) system call. It causes all errors the write(2) system call causes: Errno::EWOULDBLOCK, Errno::EINTR, etc. The result may also be smaller than string.length (partial write). The caller should care such errors and partial write.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitWritable. So IO::WaitWritable can be used to rescue the exceptions for retrying write_nonblock.
# Creates a pipe. r, w = IO.pipe # write_nonblock writes only 65536 bytes and return 65536. # (The pipe size is 65536 bytes on this environment.) s = "a" * 100000 p w.write_nonblock(s) #=> 65536 # write_nonblock cannot write a byte and raise EWOULDBLOCK (EAGAIN). p w.write_nonblock("b") # Resource temporarily unavailable (Errno::EAGAIN)
If the write buffer is not empty, it is flushed at first.
When write_nonblock raises an exception kind of IO::WaitWritable, write_nonblock should not be called until io is writable for avoiding busy loop. This can be done as follows.
begin result = io.write_nonblock(string) rescue IO::WaitWritable, Errno::EINTR IO.select(nil, [io]) retry end
Note that this doesn’t guarantee to write all data in string. The length written is reported as result and it should be checked later.
On some platforms such as Windows, write_nonblock is not supported according to the kind of the IO object. In such cases, write_nonblock raises Errno::EBADF.
By specifying a keyword argument exception to false, you can indicate that write_nonblock should not raise an IO::WaitWritable exception, but return the symbol :wait_writable instead.
Provides marshalling support for use by the Marshal library.
Try to convert obj into a Regexp, using to_regexp method. Returns converted regexp or nil if obj cannot be converted for any reason.
Regexp.try_convert(/re/) #=> /re/ Regexp.try_convert("re") #=> nil o = Object.new Regexp.try_convert(o) #=> nil def o.to_regexp() /foo/ end Regexp.try_convert(o) #=> /foo/
This method is called when the parser found syntax error.
Receives up to maxlen bytes from socket using recvfrom(2) after O_NONBLOCK is set for the underlying file descriptor. flags is zero or more of the MSG_ options. The first element of the results, mesg, is the data received. The second element, sender_addrinfo, contains protocol-specific address information of the sender.
When recvfrom(2) returns 0, Socket#recvfrom_nonblock returns an empty string as data. The meaning depends on the socket: EOF on TCP, empty packet on UDP, etc.
maxlen - the maximum number of bytes to receive from the socket
flags - zero or more of the MSG_ options
outbuf - destination String buffer
opts - keyword hash, supporting ‘exception: false`
# In one file, start this first require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.bind(sockaddr) socket.listen(5) client, client_addrinfo = socket.accept begin # emulate blocking recvfrom pair = client.recvfrom_nonblock(20) rescue IO::WaitReadable IO.select([client]) retry end data = pair[0].chomp puts "I only received 20 bytes '#{data}'" sleep 1 socket.close # In another file, start this second require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.connect(sockaddr) socket.puts "Watch this get cut short!" socket.close
Refer to Socket#recvfrom for the exceptions that may be thrown if the call to recvfrom_nonblock fails.
Socket#recvfrom_nonblock may raise any error corresponding to recvfrom(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK or Errno::EAGAIN, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying recvfrom_nonblock.
By specifying a keyword argument exception to false, you can indicate that recvfrom_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.
Accepts an incoming connection using accept(2) after O_NONBLOCK is set for the underlying file descriptor. It returns an array containing the accepted socket for the incoming connection, client_socket, and an Addrinfo, client_addrinfo.
# In one script, start this first require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.bind(sockaddr) socket.listen(5) begin # emulate blocking accept client_socket, client_addrinfo = socket.accept_nonblock rescue IO::WaitReadable, Errno::EINTR IO.select([socket]) retry end puts "The client said, '#{client_socket.readline.chomp}'" client_socket.puts "Hello from script one!" socket.close # In another script, start this second require 'socket' include Socket::Constants socket = Socket.new(AF_INET, SOCK_STREAM, 0) sockaddr = Socket.sockaddr_in(2200, 'localhost') socket.connect(sockaddr) socket.puts "Hello from script 2." puts "The server said, '#{socket.readline.chomp}'" socket.close
Refer to Socket#accept for the exceptions that may be thrown if the call to accept_nonblock fails.
Socket#accept_nonblock may raise any error corresponding to accept(2) failure, including Errno::EWOULDBLOCK.
If the exception is Errno::EWOULDBLOCK, Errno::EAGAIN, Errno::ECONNABORTED or Errno::EPROTO, it is extended by IO::WaitReadable. So IO::WaitReadable can be used to rescue the exceptions for retrying accept_nonblock.
By specifying a keyword argument exception to false, you can indicate that accept_nonblock should not raise an IO::WaitReadable exception, but return the symbol :wait_readable instead.