Results for: "Psych"

Iterates over each key in the database.

If no block is given, returns an Enumerator.

Iterates over each key-value pair in the database.

If no block is given, returns an Enumerator.

See IO#each.

See IO#each_byte.

See IO#each_codepoint.

This returns the value that scan_until would return, without advancing the scan pointer. The match register is affected, though.

s = StringScanner.new("Fri Dec 12 1975 14:39")
s.check_until /12/          # -> "Fri Dec 12"
s.pos                       # -> 0
s.matched                   # -> 12

Mnemonic: it “checks” to see whether a scan_until will return a value.

Scans the string until the pattern is matched. Advances the scan pointer if advance_pointer_p, otherwise not. Returns the matched string if return_string_p is true, otherwise returns the number of bytes advanced. This method does affect the match register.

Returns the size of the most recent match (see matched), or nil if there was no recent match.

s = StringScanner.new('test string')
s.check /\w+/           # -> "test"
s.matched_size          # -> 4
s.check /\d+/           # -> nil
s.matched_size          # -> nil

Returns the pre-match

s = StringScanner.new('test string')
s.scan(/\w+/)           # -> "test"
s.scan(/\s+/)           # -> " "
s.pre_match             # -> "test"
s.post_match            # -> "string"

Returns the post-match

s = StringScanner.new('test string')
s.scan(/\w+/)           # -> "test"
s.scan(/\s+/)           # -> " "
s.pre_match             # -> "test"
s.post_match            # -> "string"

Calls block once for each key in hsh, passing the value as a parameter.

If no block is given, an enumerator is returned instead.

h = { "a" => 100, "b" => 200 }
h.each_value {|value| puts value }

produces:

100
200

Calls block once for each key in hsh, passing the key as a parameter.

If no block is given, an enumerator is returned instead.

h = { "a" => 100, "b" => 200 }
h.each_key {|key| puts key }

produces:

a
b

Calls block once for each key in hsh, passing the key-value pair as parameters.

If no block is given, an enumerator is returned instead.

h = { "a" => 100, "b" => 200 }
h.each {|key, value| puts "#{key} is #{value}" }

produces:

a is 100
b is 200

Returns an array containing the values associated with the given keys but also raises KeyError when one of keys can’t be found. Also see Hash#values_at and Hash#fetch.

h = { "cat" => "feline", "dog" => "canine", "cow" => "bovine" }

h.fetch_values("cow", "cat")                   #=> ["bovine", "feline"]
h.fetch_values("cow", "bird")                  # raises KeyError
h.fetch_values("cow", "bird") { |k| k.upcase } #=> ["bovine", "BIRD"]

Yields each environment variable name and value.

If no block is given an Enumerator is returned.

Yields each environment variable name.

An Enumerator is returned if no block is given.

Yields each environment variable value.

An Enumerator is returned if no block was given.

Returns an enumerator which iterates over each line (separated by sep, which defaults to your platform’s newline character) of each file in ARGV. If a block is supplied, each line in turn will be yielded to the block, otherwise an enumerator is returned. The optional limit argument is an Integer specifying the maximum length of each line; longer lines will be split according to this limit.

This method allows you to treat the files supplied on the command line as a single file consisting of the concatenation of each named file. After the last line of the first file has been returned, the first line of the second file is returned. The ARGF.filename and ARGF.lineno methods can be used to determine the filename of the current line and line number of the whole input, respectively.

For example, the following code prints out each line of each named file prefixed with its line number, displaying the filename once per file:

ARGF.each_line do |line|
  puts ARGF.filename if ARGF.file.lineno == 1
  puts "#{ARGF.file.lineno}: #{line}"
end

While the following code prints only the first file’s name at first, and the contents with line number counted through all named files.

ARGF.each_line do |line|
  puts ARGF.filename if ARGF.lineno == 1
  puts "#{ARGF.lineno}: #{line}"
end

Iterates over each byte of each file in ARGV. A byte is returned as an Integer in the range 0..255.

This method allows you to treat the files supplied on the command line as a single file consisting of the concatenation of each named file. After the last byte of the first file has been returned, the first byte of the second file is returned. The ARGF.filename method can be used to determine the filename of the current byte.

If no block is given, an enumerator is returned instead.

For example:

ARGF.bytes.to_a  #=> [35, 32, ... 95, 10]

Iterates over each codepoint of each file in ARGF.

This method allows you to treat the files supplied on the command line as a single file consisting of the concatenation of each named file. After the last codepoint of the first file has been returned, the first codepoint of the second file is returned. The ARGF.filename method can be used to determine the name of the file in which the current codepoint appears.

If no block is given, an enumerator is returned instead.

Return the accept character set for all new CGI instances.

Set the accept character set for all new CGI instances.

‘each_option’ is an alias of ‘each’.

Creates an OptionParser::Switch from the parameters. The parsed argument value is passed to the given block, where it can be processed.

See at the beginning of OptionParser for some full examples.

opts can include the following elements:

Argument style:

One of the following:

:NONE, :REQUIRED, :OPTIONAL

Argument pattern:

Acceptable option argument format, must be pre-defined with OptionParser.accept or OptionParser#accept, or Regexp. This can appear once or assigned as String if not present, otherwise causes an ArgumentError. Examples:

Float, Time, Array

Possible argument values:

Hash or Array.

[:text, :binary, :auto]
%w[iso-2022-jp shift_jis euc-jp utf8 binary]
{ "jis" => "iso-2022-jp", "sjis" => "shift_jis" }

Long style switch:

Specifies a long style switch which takes a mandatory, optional or no argument. It’s a string of the following form:

"--switch=MANDATORY" or "--switch MANDATORY"
"--switch[=OPTIONAL]"
"--switch"

Short style switch:

Specifies short style switch which takes a mandatory, optional or no argument. It’s a string of the following form:

"-xMANDATORY"
"-x[OPTIONAL]"
"-x"

There is also a special form which matches character range (not full set of regular expression):

"-[a-z]MANDATORY"
"-[a-z][OPTIONAL]"
"-[a-z]"

Argument style and description:

Instead of specifying mandatory or optional arguments directly in the switch parameter, this separate parameter can be used.

"=MANDATORY"
"=[OPTIONAL]"

Description:

Description string for the option.

"Run verbosely"

Handler:

Handler for the parsed argument value. Either give a block or pass a Proc or Method as an argument.