Returns uri converted to a URI object.
Returns uri converted to a URI object.
Returns the string resulting from applying format_string to any additional arguments. Within the format string, any characters other than format sequences are copied to the result.
The syntax of a format sequence is follows.
%[flags][width][.precision]type
A format sequence consists of a percent sign, followed by optional flags, width, and precision indicators, then terminated with a field type character. The field type controls how the corresponding sprintf argument is to be interpreted, while the flags modify that interpretation.
The field type characters are:
Field | Integer Format
------+--------------------------------------------------------------
b | Convert argument as a binary number.
| Negative numbers will be displayed as a two's complement
| prefixed with `..1'.
B | Equivalent to `b', but uses an uppercase 0B for prefix
| in the alternative format by #.
d | Convert argument as a decimal number.
i | Identical to `d'.
o | Convert argument as an octal number.
| Negative numbers will be displayed as a two's complement
| prefixed with `..7'.
u | Identical to `d'.
x | Convert argument as a hexadecimal number.
| Negative numbers will be displayed as a two's complement
| prefixed with `..f' (representing an infinite string of
| leading 'ff's).
X | Equivalent to `x', but uses uppercase letters.
Field | Float Format
------+--------------------------------------------------------------
e | Convert floating point argument into exponential notation
| with one digit before the decimal point as [-]d.dddddde[+-]dd.
| The precision specifies the number of digits after the decimal
| point (defaulting to six).
E | Equivalent to `e', but uses an uppercase E to indicate
| the exponent.
f | Convert floating point argument as [-]ddd.dddddd,
| where the precision specifies the number of digits after
| the decimal point.
g | Convert a floating point number using exponential form
| if the exponent is less than -4 or greater than or
| equal to the precision, or in dd.dddd form otherwise.
| The precision specifies the number of significant digits.
G | Equivalent to `g', but use an uppercase `E' in exponent form.
a | Convert floating point argument as [-]0xh.hhhhp[+-]dd,
| which is consisted from optional sign, "0x", fraction part
| as hexadecimal, "p", and exponential part as decimal.
A | Equivalent to `a', but use uppercase `X' and `P'.
Field | Other Format
------+--------------------------------------------------------------
c | Argument is the numeric code for a single character or
| a single character string itself.
p | The valuing of argument.inspect.
s | Argument is a string to be substituted. If the format
| sequence contains a precision, at most that many characters
| will be copied.
% | A percent sign itself will be displayed. No argument taken.
The flags modifies the behavior of the formats. The flag characters are:
Flag | Applies to | Meaning
---------+---------------+-----------------------------------------
space | bBdiouxX | Leave a space at the start of
| aAeEfgG | non-negative numbers.
| (numeric fmt) | For `o', `x', `X', `b' and `B', use
| | a minus sign with absolute value for
| | negative values.
---------+---------------+-----------------------------------------
(digit)$ | all | Specifies the absolute argument number
| | for this field. Absolute and relative
| | argument numbers cannot be mixed in a
| | sprintf string.
---------+---------------+-----------------------------------------
# | bBoxX | Use an alternative format.
| aAeEfgG | For the conversions `o', increase the precision
| | until the first digit will be `0' if
| | it is not formatted as complements.
| | For the conversions `x', `X', `b' and `B'
| | on non-zero, prefix the result with ``0x'',
| | ``0X'', ``0b'' and ``0B'', respectively.
| | For `a', `A', `e', `E', `f', `g', and 'G',
| | force a decimal point to be added,
| | even if no digits follow.
| | For `g' and 'G', do not remove trailing zeros.
---------+---------------+-----------------------------------------
+ | bBdiouxX | Add a leading plus sign to non-negative
| aAeEfgG | numbers.
| (numeric fmt) | For `o', `x', `X', `b' and `B', use
| | a minus sign with absolute value for
| | negative values.
---------+---------------+-----------------------------------------
- | all | Left-justify the result of this conversion.
---------+---------------+-----------------------------------------
0 (zero) | bBdiouxX | Pad with zeros, not spaces.
| aAeEfgG | For `o', `x', `X', `b' and `B', radix-1
| (numeric fmt) | is used for negative numbers formatted as
| | complements.
---------+---------------+-----------------------------------------
* | all | Use the next argument as the field width.
| | If negative, left-justify the result. If the
| | asterisk is followed by a number and a dollar
| | sign, use the indicated argument as the width.
Examples of flags:
# `+' and space flag specifies the sign of non-negative numbers. sprintf("%d", 123) #=> "123" sprintf("%+d", 123) #=> "+123" sprintf("% d", 123) #=> " 123" # `#' flag for `o' increases number of digits to show `0'. # `+' and space flag changes format of negative numbers. sprintf("%o", 123) #=> "173" sprintf("%#o", 123) #=> "0173" sprintf("%+o", -123) #=> "-173" sprintf("%o", -123) #=> "..7605" sprintf("%#o", -123) #=> "..7605" # `#' flag for `x' add a prefix `0x' for non-zero numbers. # `+' and space flag disables complements for negative numbers. sprintf("%x", 123) #=> "7b" sprintf("%#x", 123) #=> "0x7b" sprintf("%+x", -123) #=> "-7b" sprintf("%x", -123) #=> "..f85" sprintf("%#x", -123) #=> "0x..f85" sprintf("%#x", 0) #=> "0" # `#' for `X' uses the prefix `0X'. sprintf("%X", 123) #=> "7B" sprintf("%#X", 123) #=> "0X7B" # `#' flag for `b' add a prefix `0b' for non-zero numbers. # `+' and space flag disables complements for negative numbers. sprintf("%b", 123) #=> "1111011" sprintf("%#b", 123) #=> "0b1111011" sprintf("%+b", -123) #=> "-1111011" sprintf("%b", -123) #=> "..10000101" sprintf("%#b", -123) #=> "0b..10000101" sprintf("%#b", 0) #=> "0" # `#' for `B' uses the prefix `0B'. sprintf("%B", 123) #=> "1111011" sprintf("%#B", 123) #=> "0B1111011" # `#' for `e' forces to show the decimal point. sprintf("%.0e", 1) #=> "1e+00" sprintf("%#.0e", 1) #=> "1.e+00" # `#' for `f' forces to show the decimal point. sprintf("%.0f", 1234) #=> "1234" sprintf("%#.0f", 1234) #=> "1234." # `#' for `g' forces to show the decimal point. # It also disables stripping lowest zeros. sprintf("%g", 123.4) #=> "123.4" sprintf("%#g", 123.4) #=> "123.400" sprintf("%g", 123456) #=> "123456" sprintf("%#g", 123456) #=> "123456."
The field width is an optional integer, followed optionally by a period and a precision. The width specifies the minimum number of characters that will be written to the result for this field.
Examples of width:
# padding is done by spaces, width=20 # 0 or radix-1. <------------------> sprintf("%20d", 123) #=> " 123" sprintf("%+20d", 123) #=> " +123" sprintf("%020d", 123) #=> "00000000000000000123" sprintf("%+020d", 123) #=> "+0000000000000000123" sprintf("% 020d", 123) #=> " 0000000000000000123" sprintf("%-20d", 123) #=> "123 " sprintf("%-+20d", 123) #=> "+123 " sprintf("%- 20d", 123) #=> " 123 " sprintf("%020x", -123) #=> "..ffffffffffffffff85"
For numeric fields, the precision controls the number of decimal places displayed. For string fields, the precision determines the maximum number of characters to be copied from the string. (Thus, the format sequence %10.10s will always contribute exactly ten characters to the result.)
Examples of precisions:
# precision for `d', 'o', 'x' and 'b' is # minimum number of digits <------> sprintf("%20.8d", 123) #=> " 00000123" sprintf("%20.8o", 123) #=> " 00000173" sprintf("%20.8x", 123) #=> " 0000007b" sprintf("%20.8b", 123) #=> " 01111011" sprintf("%20.8d", -123) #=> " -00000123" sprintf("%20.8o", -123) #=> " ..777605" sprintf("%20.8x", -123) #=> " ..ffff85" sprintf("%20.8b", -11) #=> " ..110101" # "0x" and "0b" for `#x' and `#b' is not counted for # precision but "0" for `#o' is counted. <------> sprintf("%#20.8d", 123) #=> " 00000123" sprintf("%#20.8o", 123) #=> " 00000173" sprintf("%#20.8x", 123) #=> " 0x0000007b" sprintf("%#20.8b", 123) #=> " 0b01111011" sprintf("%#20.8d", -123) #=> " -00000123" sprintf("%#20.8o", -123) #=> " ..777605" sprintf("%#20.8x", -123) #=> " 0x..ffff85" sprintf("%#20.8b", -11) #=> " 0b..110101" # precision for `e' is number of # digits after the decimal point <------> sprintf("%20.8e", 1234.56789) #=> " 1.23456789e+03" # precision for `f' is number of # digits after the decimal point <------> sprintf("%20.8f", 1234.56789) #=> " 1234.56789000" # precision for `g' is number of # significant digits <-------> sprintf("%20.8g", 1234.56789) #=> " 1234.5679" # <-------> sprintf("%20.8g", 123456789) #=> " 1.2345679e+08" # precision for `s' is # maximum number of characters <------> sprintf("%20.8s", "string test") #=> " string t"
Examples:
sprintf("%d %04x", 123, 123) #=> "123 007b" sprintf("%08b '%4s'", 123, 123) #=> "01111011 ' 123'" sprintf("%1$*2$s %2$d %1$s", "hello", 8) #=> " hello 8 hello" sprintf("%1$*2$s %2$d", "hello", -8) #=> "hello -8" sprintf("%+g:% g:%-g", 1.23, 1.23, 1.23) #=> "+1.23: 1.23:1.23" sprintf("%u", -123) #=> "-123"
For more complex formatting, Ruby supports a reference by name. %<name>s style uses format style, but %{name} style doesn’t.
Examples:
sprintf("%<foo>d : %<bar>f", { :foo => 1, :bar => 2 }) #=> 1 : 2.000000 sprintf("%{foo}f", { :foo => 1 }) # => "1f"
Executes command… in a subshell. command… is one of following forms.
commandline : command line string which is passed to the standard shell cmdname, arg1, ... : command name and one or more arguments (no shell) [cmdname, argv0], arg1, ... : command name, argv[0] and zero or more arguments (no shell)
system returns true if the command gives zero exit status, false for non zero exit status. Returns nil if command execution fails. An error status is available in $?. The arguments are processed in the same way as for Kernel.spawn.
The hash arguments, env and options, are same as exec and spawn. See Kernel.spawn for details.
system("echo *") system("echo", "*")
produces:
config.h main.rb *
See Kernel.exec for the standard shell.
Specifies the handling of signals. The first parameter is a signal name (a string such as “SIGALRM”, “SIGUSR1”, and so on) or a signal number. The characters “SIG” may be omitted from the signal name. The command or block specifies code to be run when the signal is raised. If the command is the string “IGNORE” or “SIG_IGN”, the signal will be ignored. If the command is “DEFAULT” or “SIG_DFL”, the Ruby’s default handler will be invoked. If the command is “EXIT”, the script will be terminated by the signal. If the command is “SYSTEM_DEFAULT”, the operating system’s default handler will be invoked. Otherwise, the given command or block will be run. The special signal name “EXIT” or signal number zero will be invoked just prior to program termination. trap returns the previous handler for the given signal.
Signal.trap(0, proc { puts "Terminating: #{$$}" }) Signal.trap("CLD") { puts "Child died" } fork && Process.wait
produces:
Terminating: 27461 Child died Terminating: 27460
Returns the first element, or the first n elements, of the enumerable. If the enumerable is empty, the first form returns nil, and the second form returns an empty array.
%w[foo bar baz].first #=> "foo" %w[foo bar baz].first(2) #=> ["foo", "bar"] %w[foo bar baz].first(10) #=> ["foo", "bar", "baz"] [].first #=> nil [].first(10) #=> []
Takes one element from enum and merges corresponding elements from each args. This generates a sequence of n-element arrays, where n is one more than the count of arguments. The length of the resulting sequence will be enum#size. If the size of any argument is less than enum#size, nil values are supplied. If a block is given, it is invoked for each output array, otherwise an array of arrays is returned.
a = [ 4, 5, 6 ] b = [ 7, 8, 9 ] a.zip(b) #=> [[4, 7], [5, 8], [6, 9]] [1, 2, 3].zip(a, b) #=> [[1, 4, 7], [2, 5, 8], [3, 6, 9]] [1, 2].zip(a, b) #=> [[1, 4, 7], [2, 5, 8]] a.zip([1, 2], [8]) #=> [[4, 1, 8], [5, 2, nil], [6, nil, nil]] c = [] a.zip(b) { |x, y| c << x + y } #=> nil c #=> [11, 13, 15]
Enables coverage measurement.
Returns system temporary directory; typically “/tmp”.
Returns a Digest subclass by name.
require 'openssl' OpenSSL::Digest("MD5") # => OpenSSL::Digest::MD5 Digest("Foo") # => NameError: wrong constant name Foo
Returns a Digest subclass by name.
require 'openssl' OpenSSL::Digest("MD5") # => OpenSSL::Digest::MD5 Digest("Foo") # => NameError: wrong constant name Foo
Returns self, for backward compatibility.
Gzip the given string. Valid values of level are Zlib::NO_COMPRESSION, Zlib::BEST_SPEED, Zlib::BEST_COMPRESSION, Zlib::DEFAULT_COMPRESSION (default), or an integer from 0 to 9.
This method is almost equivalent to the following code:
def gzip(string, level: nil, strategy: nil) sio = StringIO.new sio.binmode gz = Zlib::GzipWriter.new(sio, level, strategy) gz.write(string) gz.close sio.string end
See also Zlib.gunzip
Decode the given gzipped string.
This method is almost equivalent to the following code:
def gunzip(string) sio = StringIO.new(string) gz = Zlib::GzipReader.new(sio, encoding: Encoding::ASCII_8BIT) gz.read ensure gz&.close end
See also Zlib.gzip
Return true if the named file exists.
file_name can be an IO object.
“file exists” means that stat() or fstat() system call is successful.
Deprecated method. Don’t use.
Returns true if the named file is writable by the effective user and group id of this process. See eaccess(3).
Returns true if the named file has the sticky bit set.
Initiates garbage collection, unless manually disabled.
This method is defined with keyword arguments that default to true:
def GC.start(full_mark: true, immediate_sweep: true); end
Use full_mark: false to perform a minor GC. Use immediate_sweep: false to defer sweeping (use lazy sweep).
Note: These keyword arguments are implementation and version dependent. They are not guaranteed to be future-compatible, and may be ignored if the underlying implementation does not support them.
Returns a Hash containing information about the GC.
The hash includes information about internal statistics about GC such as:
{
:count=>0,
:heap_allocated_pages=>24,
:heap_sorted_length=>24,
:heap_allocatable_pages=>0,
:heap_available_slots=>9783,
:heap_live_slots=>7713,
:heap_free_slots=>2070,
:heap_final_slots=>0,
:heap_marked_slots=>0,
:heap_eden_pages=>24,
:heap_tomb_pages=>0,
:total_allocated_pages=>24,
:total_freed_pages=>0,
:total_allocated_objects=>7796,
:total_freed_objects=>83,
:malloc_increase_bytes=>2389312,
:malloc_increase_bytes_limit=>16777216,
:minor_gc_count=>0,
:major_gc_count=>0,
:remembered_wb_unprotected_objects=>0,
:remembered_wb_unprotected_objects_limit=>0,
:old_objects=>0,
:old_objects_limit=>0,
:oldmalloc_increase_bytes=>2389760,
:oldmalloc_increase_bytes_limit=>16777216
}
The contents of the hash are implementation specific and may be changed in the future.
This method is only expected to work on C Ruby.
Get the URI defining the local dRuby space.
This is the URI of the current server. See current_server.