Returns the one-character string which cause Encoding::UndefinedConversionError.
ec = Encoding::Converter.new("ISO-8859-1", "EUC-JP") begin ec.convert("\xa0") rescue Encoding::UndefinedConversionError puts $!.error_char.dump #=> "\xC2\xA0" p $!.error_char.encoding #=> #<Encoding:UTF-8> end
Returns the discarded bytes when Encoding::InvalidByteSequenceError occurs.
ec = Encoding::Converter.new("EUC-JP", "ISO-8859-1") begin ec.convert("abc\xA1\xFFdef") rescue Encoding::InvalidByteSequenceError p $! #=> #<Encoding::InvalidByteSequenceError: "\xA1" followed by "\xFF" on EUC-JP> puts $!.error_bytes.dump #=> "\xA1" puts $!.readagain_bytes.dump #=> "\xFF" end
possible opt elements:
hash form: :partial_input => true # source buffer may be part of larger source :after_output => true # stop conversion after output before input integer form: Encoding::Converter::PARTIAL_INPUT Encoding::Converter::AFTER_OUTPUT
possible results:
:invalid_byte_sequence :incomplete_input :undefined_conversion :after_output :destination_buffer_full :source_buffer_empty :finished
primitive_convert converts source_buffer into destination_buffer.
source_buffer should be a string or nil. nil means an empty string.
destination_buffer should be a string.
destination_byteoffset should be an integer or nil. nil means the end of destination_buffer. If it is omitted, nil is assumed.
destination_bytesize should be an integer or nil. nil means unlimited. If it is omitted, nil is assumed.
opt should be nil, a hash or an integer. nil means no flags. If it is omitted, nil is assumed.
primitive_convert converts the content of source_buffer from beginning and store the result into destination_buffer.
destination_byteoffset and destination_bytesize specify the region which the converted result is stored. destination_byteoffset specifies the start position in destination_buffer in bytes. If destination_byteoffset is nil, destination_buffer.bytesize is used for appending the result. destination_bytesize specifies maximum number of bytes. If destination_bytesize is nil, destination size is unlimited. After conversion, destination_buffer is resized to destination_byteoffset + actually produced number of bytes. Also destination_buffer’s encoding is set to destination_encoding.
primitive_convert drops the converted part of source_buffer. the dropped part is converted in destination_buffer or buffered in Encoding::Converter object.
primitive_convert stops conversion when one of following condition met.
invalid byte sequence found in source buffer (:invalid_byte_sequence) primitive_errinfo and last_error methods returns the detail of the error.
unexpected end of source buffer (:incomplete_input) this occur only when :partial_input is not specified. primitive_errinfo and last_error methods returns the detail of the error.
character not representable in output encoding (:undefined_conversion) primitive_errinfo and last_error methods returns the detail of the error.
after some output is generated, before input is done (:after_output) this occur only when :after_output is specified.
destination buffer is full (:destination_buffer_full) this occur only when destination_bytesize is non-nil.
source buffer is empty (:source_buffer_empty) this occur only when :partial_input is specified.
conversion is finished (:finished)
example:
ec = Encoding::Converter.new("UTF-8", "UTF-16BE") ret = ec.primitive_convert(src="pi", dst="", nil, 100) p [ret, src, dst] #=> [:finished, "", "\x00p\x00i"] ec = Encoding::Converter.new("UTF-8", "UTF-16BE") ret = ec.primitive_convert(src="pi", dst="", nil, 1) p [ret, src, dst] #=> [:destination_buffer_full, "i", "\x00"] ret = ec.primitive_convert(src, dst="", nil, 1) p [ret, src, dst] #=> [:destination_buffer_full, "", "p"] ret = ec.primitive_convert(src, dst="", nil, 1) p [ret, src, dst] #=> [:destination_buffer_full, "", "\x00"] ret = ec.primitive_convert(src, dst="", nil, 1) p [ret, src, dst] #=> [:finished, "", "i"]
primitive_errinfo returns important information regarding the last error as a 5-element array:
[result, enc1, enc2, error_bytes, readagain_bytes]
result is the last result of primitive_convert.
Other elements are only meaningful when result is :invalid_byte_sequence, :incomplete_input or :undefined_conversion.
enc1 and enc2 indicate a conversion step as a pair of strings. For example, a converter from EUC-JP to ISO-8859-1 converts a string as follows: EUC-JP -> UTF-8 -> ISO-8859-1. So [enc1, enc2] is either [“EUC-JP”, “UTF-8”] or [“UTF-8”, “ISO-8859-1”].
error_bytes and readagain_bytes indicate the byte sequences which caused the error. error_bytes is discarded portion. readagain_bytes is buffered portion which is read again on next conversion.
Example:
# \xff is invalid as EUC-JP. ec = Encoding::Converter.new("EUC-JP", "Shift_JIS") ec.primitive_convert(src="\xff", dst="", nil, 10) p ec.primitive_errinfo #=> [:invalid_byte_sequence, "EUC-JP", "UTF-8", "\xFF", ""] # HIRAGANA LETTER A (\xa4\xa2 in EUC-JP) is not representable in ISO-8859-1. # Since this error is occur in UTF-8 to ISO-8859-1 conversion, # error_bytes is HIRAGANA LETTER A in UTF-8 (\xE3\x81\x82). ec = Encoding::Converter.new("EUC-JP", "ISO-8859-1") ec.primitive_convert(src="\xa4\xa2", dst="", nil, 10) p ec.primitive_errinfo #=> [:undefined_conversion, "UTF-8", "ISO-8859-1", "\xE3\x81\x82", ""] # partial character is invalid ec = Encoding::Converter.new("EUC-JP", "ISO-8859-1") ec.primitive_convert(src="\xa4", dst="", nil, 10) p ec.primitive_errinfo #=> [:incomplete_input, "EUC-JP", "UTF-8", "\xA4", ""] # Encoding::Converter::PARTIAL_INPUT prevents invalid errors by # partial characters. ec = Encoding::Converter.new("EUC-JP", "ISO-8859-1") ec.primitive_convert(src="\xa4", dst="", nil, 10, Encoding::Converter::PARTIAL_INPUT) p ec.primitive_errinfo #=> [:source_buffer_empty, nil, nil, nil, nil] # \xd8\x00\x00@ is invalid as UTF-16BE because # no low surrogate after high surrogate (\xd8\x00). # It is detected by 3rd byte (\00) which is part of next character. # So the high surrogate (\xd8\x00) is discarded and # the 3rd byte is read again later. # Since the byte is buffered in ec, it is dropped from src. ec = Encoding::Converter.new("UTF-16BE", "UTF-8") ec.primitive_convert(src="\xd8\x00\x00@", dst="", nil, 10) p ec.primitive_errinfo #=> [:invalid_byte_sequence, "UTF-16BE", "UTF-8", "\xD8\x00", "\x00"] p src #=> "@" # Similar to UTF-16BE, \x00\xd8@\x00 is invalid as UTF-16LE. # The problem is detected by 4th byte. ec = Encoding::Converter.new("UTF-16LE", "UTF-8") ec.primitive_convert(src="\x00\xd8@\x00", dst="", nil, 10) p ec.primitive_errinfo #=> [:invalid_byte_sequence, "UTF-16LE", "UTF-8", "\x00\xD8", "@\x00"] p src #=> ""
Inserts string into the encoding converter. The string will be converted to the destination encoding and output on later conversions.
If the destination encoding is stateful, string is converted according to the state and the state is updated.
This method should be used only when a conversion error occurs.
ec = Encoding::Converter.new("utf-8", "iso-8859-1") src = "HIRAGANA LETTER A is \u{3042}." dst = "" p ec.primitive_convert(src, dst) #=> :undefined_conversion puts "[#{dst.dump}, #{src.dump}]" #=> ["HIRAGANA LETTER A is ", "."] ec.insert_output("<err>") p ec.primitive_convert(src, dst) #=> :finished puts "[#{dst.dump}, #{src.dump}]" #=> ["HIRAGANA LETTER A is <err>.", ""] ec = Encoding::Converter.new("utf-8", "iso-2022-jp") src = "\u{306F 3041 3068 2661 3002}" # U+2661 is not representable in iso-2022-jp dst = "" p ec.primitive_convert(src, dst) #=> :undefined_conversion puts "[#{dst.dump}, #{src.dump}]" #=> ["\e$B$O$!$H".force_encoding("ISO-2022-JP"), "\xE3\x80\x82"] ec.insert_output "?" # state change required to output "?". p ec.primitive_convert(src, dst) #=> :finished puts "[#{dst.dump}, #{src.dump}]" #=> ["\e$B$O$!$H\e(B?\e$B!#\e(B".force_encoding("ISO-2022-JP"), ""]
Returns an exception object for the last conversion. Returns nil if the last conversion did not produce an error.
“error” means that Encoding::InvalidByteSequenceError and Encoding::UndefinedConversionError for Encoding::Converter#convert and :invalid_byte_sequence, :incomplete_input and :undefined_conversion for Encoding::Converter#primitive_convert.
ec = Encoding::Converter.new("utf-8", "iso-8859-1") p ec.primitive_convert(src="\xf1abcd", dst="") #=> :invalid_byte_sequence p ec.last_error #=> #<Encoding::InvalidByteSequenceError: "\xF1" followed by "a" on UTF-8> p ec.primitive_convert(src, dst, nil, 1) #=> :destination_buffer_full p ec.last_error #=> nil
Returns the length of the hash value of the digest.
This method should be overridden by each implementation subclass. If not, digest_obj.digest().length() is returned.
Returns the block length of the digest.
This method is overridden by each implementation subclass.
Similar to read, but raises EOFError at end of string unless the +exception: false+ option is passed in.
Reads at most maxlen bytes in the non-blocking manner.
When no data can be read without blocking it raises OpenSSL::SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.
IO::WaitReadable means SSL needs to read internally so read_nonblock should be called again when the underlying IO is readable.
IO::WaitWritable means SSL needs to write internally so read_nonblock should be called again after the underlying IO is writable.
OpenSSL::Buffering#read_nonblock needs two rescue clause as follows:
# emulates blocking read (readpartial). begin result = ssl.read_nonblock(maxlen) rescue IO::WaitReadable IO.select([io]) retry rescue IO::WaitWritable IO.select(nil, [io]) retry end
Note that one reason that read_nonblock writes to the underlying IO is when the peer requests a new TLS/SSL handshake. See openssl the FAQ for more details. www.openssl.org/support/faq.html
Writes str in the non-blocking manner.
If there is buffered data, it is flushed first. This may block.
write_nonblock returns number of bytes written to the SSL connection.
When no data can be written without blocking it raises OpenSSL::SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.
IO::WaitReadable means SSL needs to read internally so write_nonblock should be called again after the underlying IO is readable.
IO::WaitWritable means SSL needs to write internally so write_nonblock should be called again after underlying IO is writable.
So OpenSSL::Buffering#write_nonblock needs two rescue clause as follows.
# emulates blocking write. begin result = ssl.write_nonblock(str) rescue IO::WaitReadable IO.select([io]) retry rescue IO::WaitWritable IO.select(nil, [io]) retry end
Note that one reason that write_nonblock reads from the underlying IO is when the peer requests a new TLS/SSL handshake. See the openssl FAQ for more details. www.openssl.org/support/faq.html
A wrapper class to use a StringIO object as the body and switch to a TempFile when the passed threshold is passed. Initialize the data from the query.
Handles multipart forms (in particular, forms that involve file uploads). Reads query parameters in the @params field, and cookies into @cookies.
Generate an Image Button Input element as a string.
src is the URL of the image to use for the button. name is the input name. alt is the alternative text for the image.
Alternatively, the attributes can be specified as a hash.
image_button("url") # <INPUT TYPE="image" SRC="url"> image_button("url", "name", "string") # <INPUT TYPE="image" SRC="url" NAME="name" ALT="string"> image_button("SRC" => "url", "ALT" => "string") # <INPUT TYPE="image" SRC="url" ALT="string">
Returns an array of header field strings corresponding to the case-insensitive key. This method allows you to get duplicated header fields without any processing. See also [].
p response.get_fields('Set-Cookie')
#=> ["session=al98axx; expires=Fri, 31-Dec-1999 23:58:23",
"query=rubyscript; expires=Fri, 31-Dec-1999 23:58:23"]
p response['Set-Cookie']
#=> "session=al98axx; expires=Fri, 31-Dec-1999 23:58:23, query=rubyscript; expires=Fri, 31-Dec-1999 23:58:23"
Iterates through the header names and values, passing in the name and value to the code block supplied.
Example:
response.header.each_header {|key,value| puts "#{key} = #{value}" }
Sets the HTTP Range: header. Accepts either a Range object as a single argument, or a beginning index and a length from that index. Example:
req.range = (0..1023) req.set_range 0, 1023
Returns a Range object which represents the value of the Content-Range: header field. For a partial entity body, this indicates where this fragment fits inside the full entity body, as range of byte offsets.
The length of the range represented in Content-Range: header.
UNTESTED
Helper method.
Kouhei fixed this too