Reads all of the lines in ios, and returns them in anArray. Lines are separated by the optional sep. If sep is nil, the rest of the stream is returned as a single record. If the first argument is an integer, or optional second argument is given, the returning string would not be longer than the given value in bytes. The stream must be opened for reading or an IOError will be raised.
f = File.new("testfile") f.readlines[0] #=> "This is line one\n"
Reads at most maxlen bytes from the I/O stream. It blocks only if ios has no data immediately available. It doesn’t block if some data available.
If the optional outbuf argument is present, it must reference a String, which will receive the data. The outbuf will contain only the received data after the method call even if it is not empty at the beginning.
It raises EOFError on end of file.
readpartial is designed for streams such as pipe, socket, tty, etc. It blocks only when no data immediately available. This means that it blocks only when following all conditions hold.
the byte buffer in the IO object is empty.
the content of the stream is empty.
the stream is not reached to EOF.
When readpartial blocks, it waits data or EOF on the stream. If some data is reached, readpartial returns with the data. If EOF is reached, readpartial raises EOFError.
When readpartial doesn’t blocks, it returns or raises immediately. If the byte buffer is not empty, it returns the data in the buffer. Otherwise if the stream has some content, it returns the data in the stream. Otherwise if the stream is reached to EOF, it raises EOFError.
r, w = IO.pipe # buffer pipe content w << "abc" # "" "abc". r.readpartial(4096) #=> "abc" "" "" r.readpartial(4096) # blocks because buffer and pipe is empty. r, w = IO.pipe # buffer pipe content w << "abc" # "" "abc" w.close # "" "abc" EOF r.readpartial(4096) #=> "abc" "" EOF r.readpartial(4096) # raises EOFError r, w = IO.pipe # buffer pipe content w << "abc\ndef\n" # "" "abc\ndef\n" r.gets #=> "abc\n" "def\n" "" w << "ghi\n" # "def\n" "ghi\n" r.readpartial(4096) #=> "def\n" "" "ghi\n" r.readpartial(4096) #=> "ghi\n" "" ""
Note that readpartial behaves similar to sysread. The differences are:
If the byte buffer is not empty, read from the byte buffer instead of “sysread for buffered IO (IOError)”.
It doesn’t cause Errno::EWOULDBLOCK and Errno::EINTR. When readpartial meets EWOULDBLOCK and EINTR by read system call, readpartial retry the system call.
The latter means that readpartial is nonblocking-flag insensitive. It blocks on the situation IO#sysread causes Errno::EWOULDBLOCK as if the fd is blocking mode.
Reads a one-character string from ios. Raises an EOFError on end of file.
f = File.new("testfile") f.readchar #=> "h" f.readchar #=> "e"
Positions ios to the beginning of input, resetting lineno to zero.
f = File.new("testfile") f.readline #=> "This is line one\n" f.rewind #=> 0 f.lineno #=> 0 f.readline #=> "This is line one\n"
Note that it cannot be used with streams such as pipes, ttys, and sockets.
Removes all the key-value pairs within gdbm.
By using binary search, finds a value in range which meets the given condition in O(log n) where n is the size of the range.
You can use this method in two use cases: a find-minimum mode and a find-any mode. In either case, the elements of the range must be monotone (or sorted) with respect to the block.
In find-minimum mode (this is a good choice for typical use case), the block must return true or false, and there must be a value x so that:
the block returns false for any value which is less than x, and
the block returns true for any value which is greater than or equal to x.
If x is within the range, this method returns the value x. Otherwise, it returns nil.
ary = [0, 4, 7, 10, 12] (0...ary.size).bsearch {|i| ary[i] >= 4 } #=> 1 (0...ary.size).bsearch {|i| ary[i] >= 6 } #=> 2 (0...ary.size).bsearch {|i| ary[i] >= 8 } #=> 3 (0...ary.size).bsearch {|i| ary[i] >= 100 } #=> nil (0.0...Float::INFINITY).bsearch {|x| Math.log(x) >= 0 } #=> 1.0
In find-any mode (this behaves like libc’s bsearch(3)), the block must return a number, and there must be two values x and y (x <= y) so that:
the block returns a positive number for v if v < x,
the block returns zero for v if x <= v < y, and
the block returns a negative number for v if y <= v.
This method returns any value which is within the intersection of the given range and x…y (if any). If there is no value that satisfies the condition, it returns nil.
ary = [0, 100, 100, 100, 200] (0..4).bsearch {|i| 100 - ary[i] } #=> 1, 2 or 3 (0..4).bsearch {|i| 300 - ary[i] } #=> nil (0..4).bsearch {|i| 50 - ary[i] } #=> nil
You must not mix the two modes at a time; the block must always return either true/false, or always return a number. It is undefined which value is actually picked up at each iteration.
provides a unified clone operation, for REXML::XPathParser to use across multiple Object types
Parses the given Ruby program read from src. src must be a String or an IO or a object with a gets method.
This method is called when weak warning is produced by the parser. fmt and args is printf style.
This method is called when strong warning is produced by the parser. fmt and args is printf style.
Start parsing and returns the value of the root action.
Return line number of current parsing line. This number starts from 1.
Return true if parsed source has errors.
Deletes all data from the database.
Requests a connection to be made on the given remote_sockaddr. Returns 0 if successful, otherwise an exception is raised.
remote_sockaddr - the struct sockaddr contained in a string or Addrinfo object
# Pull down Google's web page require 'socket' include Socket::Constants socket = Socket.new( AF_INET, SOCK_STREAM, 0 ) sockaddr = Socket.pack_sockaddr_in( 80, 'www.google.com' ) socket.connect( sockaddr ) socket.write( "GET / HTTP/1.0\r\n\r\n" ) results = socket.read
On unix-based systems the following system exceptions may be raised if the call to connect fails:
Errno::EACCES - search permission is denied for a component of the prefix path or write access to the socket is denied
Errno::EADDRINUSE - the sockaddr is already in use
Errno::EADDRNOTAVAIL - the specified sockaddr is not available from the local machine
Errno::EAFNOSUPPORT - the specified sockaddr is not a valid address for the address family of the specified socket
Errno::EALREADY - a connection is already in progress for the specified socket
Errno::EBADF - the socket is not a valid file descriptor
Errno::ECONNREFUSED - the target sockaddr was not listening for connections refused the connection request
Errno::ECONNRESET - the remote host reset the connection request
Errno::EFAULT - the sockaddr cannot be accessed
Errno::EHOSTUNREACH - the destination host cannot be reached (probably because the host is down or a remote router cannot reach it)
Errno::EINPROGRESS - the O_NONBLOCK is set for the socket and the connection cannot be immediately established; the connection will be established asynchronously
Errno::EINTR - the attempt to establish the connection was interrupted by delivery of a signal that was caught; the connection will be established asynchronously
Errno::EISCONN - the specified socket is already connected
Errno::EINVAL - the address length used for the sockaddr is not a valid length for the address family or there is an invalid family in sockaddr
Errno::ENAMETOOLONG - the pathname resolved had a length which exceeded PATH_MAX
Errno::ENETDOWN - the local interface used to reach the destination is down
Errno::ENETUNREACH - no route to the network is present
Errno::ENOBUFS - no buffer space is available
Errno::ENOSR - there were insufficient STREAMS resources available to complete the operation
Errno::ENOTSOCK - the socket argument does not refer to a socket
Errno::EOPNOTSUPP - the calling socket is listening and cannot be connected
Errno::EPROTOTYPE - the sockaddr has a different type than the socket bound to the specified peer address
Errno::ETIMEDOUT - the attempt to connect time out before a connection was made.
On unix-based systems if the address family of the calling socket is AF_UNIX the follow exceptions may be raised if the call to connect fails:
Errno::EIO - an i/o error occurred while reading from or writing to the file system
Errno::ELOOP - too many symbolic links were encountered in translating the pathname in sockaddr
Errno::ENAMETOOLLONG - a component of a pathname exceeded NAME_MAX characters, or an entire pathname exceeded PATH_MAX characters
Errno::ENOENT - a component of the pathname does not name an existing file or the pathname is an empty string
Errno::ENOTDIR - a component of the path prefix of the pathname in sockaddr is not a directory
On Windows systems the following system exceptions may be raised if the call to connect fails:
Errno::ENETDOWN - the network is down
Errno::EADDRINUSE - the socket’s local address is already in use
Errno::EINTR - the socket was cancelled
Errno::EINPROGRESS - a blocking socket is in progress or the service provider is still processing a callback function. Or a nonblocking connect call is in progress on the socket.
Errno::EALREADY - see Errno::EINVAL
Errno::EADDRNOTAVAIL - the remote address is not a valid address, such as ADDR_ANY TODO check ADDRANY TO INADDR_ANY
Errno::EAFNOSUPPORT - addresses in the specified family cannot be used with with this socket
Errno::ECONNREFUSED - the target sockaddr was not listening for connections refused the connection request
Errno::EFAULT - the socket’s internal address or address length parameter is too small or is not a valid part of the user space address
Errno::EINVAL - the socket is a listening socket
Errno::EISCONN - the socket is already connected
Errno::ENETUNREACH - the network cannot be reached from this host at this time
Errno::EHOSTUNREACH - no route to the network is present
Errno::ENOBUFS - no buffer space is available
Errno::ENOTSOCK - the socket argument does not refer to a socket
Errno::ETIMEDOUT - the attempt to connect time out before a connection was made.
Errno::EWOULDBLOCK - the socket is marked as nonblocking and the connection cannot be completed immediately
Errno::EACCES - the attempt to connect the datagram socket to the broadcast address failed
connect manual pages on unix-based systems
connect function in Microsoft’s Winsock functions reference
Returns the remote address as an array which contains address_family, port, hostname and numeric_address. It is defined for connection oriented socket such as TCPSocket.
If reverse_lookup is true or :hostname, hostname is obtained from numeric_address using reverse lookup. Or if it is false, or :numeric, hostname is same as numeric_address. Or if it is nil or omitted, obeys to ipsocket.do_not_reverse_lookup. See Socket.getaddrinfo also.
TCPSocket.open("www.ruby-lang.org", 80) {|sock| p sock.peeraddr #=> ["AF_INET", 80, "carbon.ruby-lang.org", "221.186.184.68"] p sock.peeraddr(true) #=> ["AF_INET", 80, "carbon.ruby-lang.org", "221.186.184.68"] p sock.peeraddr(false) #=> ["AF_INET", 80, "221.186.184.68", "221.186.184.68"] p sock.peeraddr(:hostname) #=> ["AF_INET", 80, "carbon.ruby-lang.org", "221.186.184.68"] p sock.peeraddr(:numeric) #=> ["AF_INET", 80, "221.186.184.68", "221.186.184.68"] }
creates a socket connected to the address of self.
The optional argument opts is options represented by a hash. opts may have following options:
specify the timeout in seconds.
If a block is given, it is called with the socket and the value of the block is returned. The socket is returned otherwise.
Addrinfo.tcp("www.ruby-lang.org", 80).connect {|s| s.print "GET / HTTP/1.0\r\nHost: www.ruby-lang.org\r\n\r\n" puts s.read }
Connects udpsocket to host:port.
This makes possible to send without destination address.
u1 = UDPSocket.new u1.bind("127.0.0.1", 4913) u2 = UDPSocket.new u2.connect("127.0.0.1", 4913) u2.send "uuuu", 0 p u1.recvfrom(10) #=> ["uuuu", ["AF_INET", 33230, "localhost", "127.0.0.1"]]