Results for: "to_proc"

Shell::Error

No documentation available

WEBrick::HTTPServlet::AbstractServlet#redirect_to_directory_uri

Redirects to a path ending in /

Enumerator

A class which allows both internal and external iteration.

An Enumerator can be created by the following methods.

Most methods have two forms: a block form where the contents are evaluated for each item in the enumeration, and a non-block form which returns a new Enumerator wrapping the iteration.

enumerator = %w(one two three).each
puts enumerator.class # => Enumerator

enumerator.each_with_object("foo") do |item, obj|
  puts "#{obj}: #{item}"
end

# foo: one
# foo: two
# foo: three

enum_with_obj = enumerator.each_with_object("foo")
puts enum_with_obj.class # => Enumerator

enum_with_obj.each do |item, obj|
  puts "#{obj}: #{item}"
end

# foo: one
# foo: two
# foo: three

This allows you to chain Enumerators together. For example, you can map a list’s elements to strings containing the index and the element as a string via:

puts %w[foo bar baz].map.with_index { |w, i| "#{i}:#{w}" }
# => ["0:foo", "1:bar", "2:baz"]

An Enumerator can also be used as an external iterator. For example, Enumerator#next returns the next value of the iterator or raises StopIteration if the Enumerator is at the end.

e = [1,2,3].each   # returns an enumerator object.
puts e.next   # => 1
puts e.next   # => 2
puts e.next   # => 3
puts e.next   # raises StopIteration

You can use this to implement an internal iterator as follows:

def ext_each(e)
  while true
    begin
      vs = e.next_values
    rescue StopIteration
      return $!.result
    end
    y = yield(*vs)
    e.feed y
  end
end

o = Object.new

def o.each
  puts yield
  puts yield(1)
  puts yield(1, 2)
  3
end

# use o.each as an internal iterator directly.
puts o.each {|*x| puts x; [:b, *x] }
# => [], [:b], [1], [:b, 1], [1, 2], [:b, 1, 2], 3

# convert o.each to an external iterator for
# implementing an internal iterator.
puts ext_each(o.to_enum) {|*x| puts x; [:b, *x] }
# => [], [:b], [1], [:b, 1], [1, 2], [:b, 1, 2], 3

StopIteration

Raised to stop the iteration, in particular by Enumerator#next. It is rescued by Kernel#loop.

loop do
  puts "Hello"
  raise StopIteration
  puts "World"
end
puts "Done!"

produces:

Hello
Done!

Delegator

This library provides three different ways to delegate method calls to an object. The easiest to use is SimpleDelegator. Pass an object to the constructor and all methods supported by the object will be delegated. This object can be changed later.

Going a step further, the top level DelegateClass method allows you to easily setup delegation through class inheritance. This is considerably more flexible and thus probably the most common use for this library.

Finally, if you need full control over the delegation scheme, you can inherit from the abstract class Delegator and customize as needed. (If you find yourself needing this control, have a look at Forwardable which is also in the standard library. It may suit your needs better.)

SimpleDelegator’s implementation serves as a nice example of the use of Delegator:

class SimpleDelegator < Delegator
  def __getobj__
    @delegate_sd_obj # return object we are delegating to, required
  end

  def __setobj__(obj)
    @delegate_sd_obj = obj # change delegation object,
                           # a feature we're providing
  end
end

Notes

Be advised, RDoc will not detect delegated methods.

SimpleDelegator

A concrete implementation of Delegator, this class provides the means to delegate all supported method calls to the object passed into the constructor and even to change the object being delegated to at a later time with __setobj__.

class User
  def born_on
    Date.new(1989, 9, 10)
  end
end

class UserDecorator < SimpleDelegator
  def birth_year
    born_on.year
  end
end

decorated_user = UserDecorator.new(User.new)
decorated_user.birth_year  #=> 1989
decorated_user.__getobj__  #=> #<User: ...>

A SimpleDelegator instance can take advantage of the fact that SimpleDelegator is a subclass of Delegator to call super to have methods called on the object being delegated to.

class SuperArray < SimpleDelegator
  def [](*args)
    super + 1
  end
end

SuperArray.new([1])[0]  #=> 2

Here’s a simple example that takes advantage of the fact that SimpleDelegator’s delegation object can be changed at any time.

class Stats
  def initialize
    @source = SimpleDelegator.new([])
  end

  def stats(records)
    @source.__setobj__(records)

    "Elements:  #{@source.size}\n" +
    " Non-Nil:  #{@source.compact.size}\n" +
    "  Unique:  #{@source.uniq.size}\n"
  end
end

s = Stats.new
puts s.stats(%w{James Edward Gray II})
puts
puts s.stats([1, 2, 3, nil, 4, 5, 1, 2])

Prints:

Elements:  4
 Non-Nil:  4
  Unique:  4

Elements:  8
 Non-Nil:  7
  Unique:  6

GetoptLong

The GetoptLong class allows you to parse command line options similarly to the GNU getopt_long() C library call. Note, however, that GetoptLong is a pure Ruby implementation.

GetoptLong allows for POSIX-style options like --file as well as single letter options like -f

The empty option -- (two minus symbols) is used to end option processing. This can be particularly important if options have optional arguments.

Here is a simple example of usage:

require 'getoptlong'

opts = GetoptLong.new(
  [ '--help', '-h', GetoptLong::NO_ARGUMENT ],
  [ '--repeat', '-n', GetoptLong::REQUIRED_ARGUMENT ],
  [ '--name', GetoptLong::OPTIONAL_ARGUMENT ]
)

dir = nil
name = nil
repetitions = 1
opts.each do |opt, arg|
  case opt
    when '--help'
      puts <<-EOF
hello [OPTION] ... DIR

-h, --help:
   show help

--repeat x, -n x:
   repeat x times

--name [name]:
   greet user by name, if name not supplied default is John

DIR: The directory in which to issue the greeting.
      EOF
    when '--repeat'
      repetitions = arg.to_i
    when '--name'
      if arg == ''
        name = 'John'
      else
        name = arg
      end
  end
end

if ARGV.length != 1
  puts "Missing dir argument (try --help)"
  exit 0
end

dir = ARGV.shift

Dir.chdir(dir)
for i in (1..repetitions)
  print "Hello"
  if name
    print ", #{name}"
  end
  puts
end

Example command line:

hello -n 6 --name -- /tmp

Vector

The Vector class represents a mathematical vector, which is useful in its own right, and also constitutes a row or column of a Matrix.

Method Catalogue

To create a Vector:

To access elements:

To enumerate the elements:

Properties of vectors:

Vector arithmetic:

Vector functions:

Conversion to other data types:

String representations:

Monitor

Use the Monitor class when you want to have a lock object for blocks with mutual exclusion.

require 'monitor'

lock = Monitor.new
lock.synchronize do
  # exclusive access
end

PStore

PStore implements a file based persistence mechanism based on a Hash. User code can store hierarchies of Ruby objects (values) into the data store file by name (keys). An object hierarchy may be just a single object. User code may later read values back from the data store or even update data, as needed.

The transactional behavior ensures that any changes succeed or fail together. This can be used to ensure that the data store is not left in a transitory state, where some values were updated but others were not.

Behind the scenes, Ruby objects are stored to the data store file with Marshal. That carries the usual limitations. Proc objects cannot be marshalled, for example.

Usage example: 

require "pstore"

# a mock wiki object...
class WikiPage
  def initialize( page_name, author, contents )
    @page_name = page_name
    @revisions = Array.new

    add_revision(author, contents)
  end

  attr_reader :page_name

  def add_revision( author, contents )
    @revisions << { :created  => Time.now,
                    :author   => author,
                    :contents => contents }
  end

  def wiki_page_references
    [@page_name] + @revisions.last[:contents].scan(/\b(?:[A-Z]+[a-z]+){2,}/)
  end

  # ...
end

# create a new page...
home_page = WikiPage.new( "HomePage", "James Edward Gray II",
                          "A page about the JoysOfDocumentation..." )

# then we want to update page data and the index together, or not at all...
wiki = PStore.new("wiki_pages.pstore")
wiki.transaction do  # begin transaction; do all of this or none of it
  # store page...
  wiki[home_page.page_name] = home_page
  # ensure that an index has been created...
  wiki[:wiki_index] ||= Array.new
  # update wiki index...
  wiki[:wiki_index].push(*home_page.wiki_page_references)
end                   # commit changes to wiki data store file

### Some time later... ###

# read wiki data...
wiki.transaction(true) do  # begin read-only transaction, no changes allowed
  wiki.roots.each do |data_root_name|
    p data_root_name
    p wiki[data_root_name]
  end
end

Transaction modes

By default, file integrity is only ensured as long as the operating system (and the underlying hardware) doesn’t raise any unexpected I/O errors. If an I/O error occurs while PStore is writing to its file, then the file will become corrupted.

You can prevent this by setting pstore.ultra_safe = true. However, this results in a minor performance loss, and only works on platforms that support atomic file renames. Please consult the documentation for ultra_safe for details.

Needless to say, if you’re storing valuable data with PStore, then you should backup the PStore files from time to time.

Newton

newton.rb

Solves the nonlinear algebraic equation system f = 0 by Newton’s method. This program is not dependent on BigDecimal.

To call:

  n = nlsolve(f,x)
where n is the number of iterations required,
      x is the initial value vector
      f is an Object which is used to compute the values of the equations to be solved.

It must provide the following methods:

f.values(x)

returns the values of all functions at x

f.zero

returns 0.0

f.one

returns 1.0

f.two

returns 2.0

f.ten

returns 10.0

f.eps

returns the convergence criterion (epsilon value) used to determine whether two values are considered equal. If |a-b| < epsilon, the two values are considered equal.

On exit, x is the solution vector.

RubyToken

No documentation available

MonitorMixin

In concurrent programming, a monitor is an object or module intended to be used safely by more than one thread. The defining characteristic of a monitor is that its methods are executed with mutual exclusion. That is, at each point in time, at most one thread may be executing any of its methods. This mutual exclusion greatly simplifies reasoning about the implementation of monitors compared to reasoning about parallel code that updates a data structure.

You can read more about the general principles on the Wikipedia page for Monitors

Examples

Simple object.extend 

require 'monitor.rb'

buf = []
buf.extend(MonitorMixin)
empty_cond = buf.new_cond

# consumer
Thread.start do
  loop do
    buf.synchronize do
      empty_cond.wait_while { buf.empty? }
      print buf.shift
    end
  end
end

# producer
while line = ARGF.gets
  buf.synchronize do
    buf.push(line)
    empty_cond.signal
  end
end

The consumer thread waits for the producer thread to push a line to buf while buf.empty?. The producer thread (main thread) reads a line from ARGF and pushes it into buf then calls empty_cond.signal to notify the consumer thread of new data.

Simple Class include 

require 'monitor'

class SynchronizedArray < Array

  include MonitorMixin

  def initialize(*args)
    super(*args)
  end

  alias :old_shift :shift
  alias :old_unshift :unshift

  def shift(n=1)
    self.synchronize do
      self.old_shift(n)
    end
  end

  def unshift(item)
    self.synchronize do
      self.old_unshift(item)
    end
  end

  # other methods ...
end

SynchronizedArray implements an Array with synchronized access to items. This Class is implemented as subclass of Array which includes the MonitorMixin module.

Singleton

The Singleton module implements the Singleton pattern.

Usage

To use Singleton, include the module in your class.

class Klass
   include Singleton
   # ...
end

This ensures that only one instance of Klass can be created.

a,b  = Klass.instance, Klass.instance

a == b
# => true

Klass.new
# => NoMethodError - new is private ...

The instance is created at upon the first call of Klass.instance().

class OtherKlass
  include Singleton
  # ...
end

ObjectSpace.each_object(OtherKlass){}
# => 0

OtherKlass.instance
ObjectSpace.each_object(OtherKlass){}
# => 1

This behavior is preserved under inheritance and cloning.

Implementation

This above is achieved by:

Singleton and Marshal

By default Singleton’s _dump(depth) returns the empty string. Marshalling by default will strip state information, e.g. instance variables and taint state, from the instance. Classes using Singleton can provide custom _load(str) and _dump(depth) methods to retain some of the previous state of the instance.

require 'singleton'

class Example
  include Singleton
  attr_accessor :keep, :strip
  def _dump(depth)
    # this strips the @strip information from the instance
    Marshal.dump(@keep, depth)
  end

  def self._load(str)
    instance.keep = Marshal.load(str)
    instance
  end
end

a = Example.instance
a.keep = "keep this"
a.strip = "get rid of this"
a.taint

stored_state = Marshal.dump(a)

a.keep = nil
a.strip = nil
b = Marshal.load(stored_state)
p a == b  #  => true
p a.keep  #  => "keep this"
p a.strip #  => nil

Gem::Specification#add_self_to_load_path

Adds this spec’s require paths to LOAD_PATH, in the proper location.

Gem::Specification#reset_nil_attributes_to_default

Reset nil attributes to their default values to make the spec valid

RSS::Converter#def_to_utf_8_from_iso_8859_1

No documentation available

RSS::Converter#def_to_iso_8859_1_from_utf_8

No documentation available

Gem::Resolver::Molinillo::SpecificationProvider

Provides information about specifcations and dependencies to the resolver, allowing the {Resolver} class to remain generic while still providing power and flexibility.

This module contains the methods that users of Gem::Resolver::Molinillo must to implement, using knowledge of their own model classes.

RSS::Maker::AtomGenerator

No documentation available

Fiddle::Closure::BlockCaller

Extends Fiddle::Closure to allow for building the closure in a block

OpenSSL::SSL::SSLSocket

The following attributes are available but don’t show up in rdoc.

OpenSSL::ASN1::ASN1Error

Generic error class for all errors raised in ASN1 and any of the classes defined in it.

OpenSSL::ASN1::Primitive

The parent class for all primitive encodings. Attributes are the same as for ASN1Data, with the addition of tagging. Primitive values can never be infinite length encodings, thus it is not possible to set the infinite_length attribute for Primitive and its sub-classes.

Primitive sub-classes and their mapping to Ruby classes

OpenSSL::ASN1::BitString

Additional attributes

unused_bits: if the underlying BIT STRING’s length is a multiple of 8 then unused_bits is 0. Otherwise unused_bits indicates the number of bits that are to be ignored in the final octet of the BitString‘s value.

OpenSSL::ASN1::ObjectId

NOTE: While OpenSSL::ASN1::ObjectId.new will allocate a new ObjectId, it is not typically allocated this way, but rather that are received from parsed ASN1 encodings.

While OpenSSL::ASN1::ObjectId.new will allocate a new ObjectId, it is not typically allocated this way, but rather that are received from parsed ASN1 encodings.

Additional attributes

Examples

With the Exception of OpenSSL::ASN1::EndOfContent, each Primitive class constructor takes at least one parameter, the value.

Creating EndOfContent 

eoc = OpenSSL::ASN1::EndOfContent.new

Creating any other Primitive 

prim = <class>.new(value) # <class> being one of the sub-classes except EndOfContent
prim_zero_tagged_implicit = <class>.new(value, 0, :IMPLICIT)
prim_zero_tagged_explicit = <class>.new(value, 0, :EXPLICIT)

OpenSSL::Cipher::CipherError

No documentation available
Previous Next
Search took: 7ms  ·  Total Results: 1874