Results for: "max_by"

Gem::Specification::find_active_stub_by_path

No documentation available

Gem::DependencyInstaller#find_spec_by_name_and_version

Finds a spec and the source_uri it came from for gem gem_name and version. Returns an Array of specs and sources required for installation of the gem.

MakeMakefile

mkmf.rb is used by Ruby C extensions to generate a Makefile which will correctly compile and link the C extension to Ruby and a third-party library.

Gem::RubyVersionMismatch

Raised when a gem dependencies file specifies a ruby version that does not match the current version.

Gem::CommandManager

The command manager registers and installs all the individual sub-commands supported by the gem command.

Extra commands can be provided by writing a rubygems_plugin.rb file in an installed gem. You should register your command against the Gem::CommandManager instance, like this:

# file rubygems_plugin.rb
require 'rubygems/command_manager'

Gem::CommandManager.instance.register_command :edit

You should put the implementation of your command in rubygems/commands.

# file rubygems/commands/edit_command.rb
class Gem::Commands::EditCommand < Gem::Command
  # ...
end

See Gem::Command for instructions on writing gem commands.

SyntaxError

Raised when encountering Ruby code with an invalid syntax.

eval("1+1=2")

raises the exception:

SyntaxError: (eval):1: syntax error, unexpected '=', expecting $end

BigDecimal

BigDecimal provides arbitrary-precision floating point decimal arithmetic.

Introduction

Ruby provides built-in support for arbitrary precision integer arithmetic.

For example:

42**13  #=>   1265437718438866624512

BigDecimal provides similar support for very large or very accurate floating point numbers.

Decimal arithmetic is also useful for general calculation, because it provides the correct answers people expect–whereas normal binary floating point arithmetic often introduces subtle errors because of the conversion between base 10 and base 2.

For example, try:

sum = 0
10_000.times do
  sum = sum + 0.0001
end
print sum #=> 0.9999999999999062

and contrast with the output from:

require 'bigdecimal'

sum = BigDecimal.new("0")
10_000.times do
  sum = sum + BigDecimal.new("0.0001")
end
print sum #=> 0.1E1

Similarly:

(BigDecimal.new("1.2") - BigDecimal("1.0")) == BigDecimal("0.2") #=> true

(1.2 - 1.0) == 0.2 #=> false

Special features of accurate decimal arithmetic

Because BigDecimal is more accurate than normal binary floating point arithmetic, it requires some special values.

Infinity

BigDecimal sometimes needs to return infinity, for example if you divide a value by zero.

BigDecimal.new("1.0") / BigDecimal.new("0.0")  #=> Infinity
BigDecimal.new("-1.0") / BigDecimal.new("0.0")  #=> -Infinity

You can represent infinite numbers to BigDecimal using the strings 'Infinity', '+Infinity' and '-Infinity' (case-sensitive)

Not a Number

When a computation results in an undefined value, the special value NaN (for ‘not a number’) is returned.

Example:

BigDecimal.new("0.0") / BigDecimal.new("0.0") #=> NaN

You can also create undefined values.

NaN is never considered to be the same as any other value, even NaN itself:

n = BigDecimal.new('NaN')
n == 0.0 #=> false
n == n #=> false

Positive and negative zero

If a computation results in a value which is too small to be represented as a BigDecimal within the currently specified limits of precision, zero must be returned.

If the value which is too small to be represented is negative, a BigDecimal value of negative zero is returned.

BigDecimal.new("1.0") / BigDecimal.new("-Infinity") #=> -0.0

If the value is positive, a value of positive zero is returned.

BigDecimal.new("1.0") / BigDecimal.new("Infinity") #=> 0.0

(See BigDecimal.mode for how to specify limits of precision.)

Note that -0.0 and 0.0 are considered to be the same for the purposes of comparison.

Note also that in mathematics, there is no particular concept of negative or positive zero; true mathematical zero has no sign.

License

Copyright © 2002 by Shigeo Kobayashi <shigeo@tinyforest.gr.jp>.

BigDecimal is released under the Ruby and 2-clause BSD licenses. See LICENSE.txt for details.

Maintained by mrkn <mrkn@mrkn.jp> and ruby-core members.

Documented by zzak <zachary@zacharyscott.net>, mathew <meta@pobox.com>, and many other contributors.

BigDecimal extends the native Numeric class to provide the to_digits and to_d methods.

When you require BigDecimal in your application, this method will be available on BigDecimal objects.

Matrix

The Matrix class represents a mathematical matrix. It provides methods for creating matrices, operating on them arithmetically and algebraically, and determining their mathematical properties (trace, rank, inverse, determinant).

Method Catalogue

To create a matrix:

To access Matrix elements/columns/rows/submatrices/properties:

Properties of a matrix:

Matrix arithmetic:

Matrix functions:

Matrix decompositions:

Complex arithmetic:

Conversion to other data types:

String representations:

MatchData

MatchData is the type of the special variable $~, and is the type of the object returned by Regexp#match and Regexp.last_match. It encapsulates all the results of a pattern match, results normally accessed through the special variables $&, $', $`, $1, $2, and so on.

FloatDomainError

Raised when attempting to convert special float values (in particular infinite or NaN) to numerical classes which don’t support them.

Float::INFINITY.to_r
#=> FloatDomainError: Infinity

BigMath

Provides mathematical functions.

Example:

require "bigdecimal/math"

include BigMath

a = BigDecimal((PI(100)/2).to_s)
puts sin(a,100) # => 0.10000000000000000000......E1

Benchmark

The Benchmark module provides methods to measure and report the time used to execute Ruby code.

The result:

              user     system      total        real
for:      1.010000   0.000000   1.010000 (  1.015688)
times:    1.000000   0.000000   1.000000 (  1.003611)
upto:     1.030000   0.000000   1.030000 (  1.028098)

CMath

Trigonometric and transcendental functions for complex numbers.

CMath is a library that provides trigonometric and transcendental functions for complex numbers. The functions in this module accept integers, floating-point numbers or complex numbers as arguments.

Note that the selection of functions is similar, but not identical, to that in module math. The reason for having two modules is that some users aren’t interested in complex numbers, and perhaps don’t even know what they are. They would rather have Math.sqrt(-1) raise an exception than return a complex number.

For more information you can see Complex class.

Usage

To start using this library, simply require cmath library:

require "cmath"

Exception2MessageMapper

Helper module for easily defining exceptions with predefined messages.

Usage

1.

class Foo
  extend Exception2MessageMapper
  def_e2message ExistingExceptionClass, "message..."
  def_exception :NewExceptionClass, "message..."[, superclass]
  ...
end

2.

module Error
  extend Exception2MessageMapper
  def_e2message ExistingExceptionClass, "message..."
  def_exception :NewExceptionClass, "message..."[, superclass]
  ...
end
class Foo
  include Error
  ...
end

foo = Foo.new
foo.Fail ....

3.

module Error
  extend Exception2MessageMapper
  def_e2message ExistingExceptionClass, "message..."
  def_exception :NewExceptionClass, "message..."[, superclass]
  ...
end
class Foo
  extend Exception2MessageMapper
  include Error
  ...
end

Foo.Fail NewExceptionClass, arg...
Foo.Fail ExistingExceptionClass, arg...

Math

When mathn is required, the Math module changes as follows:

Standard Math module behaviour:

Math.sqrt(4/9)     # => 0.0
Math.sqrt(4.0/9.0) # => 0.666666666666667
Math.sqrt(- 4/9)   # => Errno::EDOM: Numerical argument out of domain - sqrt

After require ‘mathn’, this is changed to:

require 'mathn'
Math.sqrt(4/9)      # => 2/3
Math.sqrt(4.0/9.0)  # => 0.666666666666667
Math.sqrt(- 4/9)    # => Complex(0, 2/3)

The Math module contains module functions for basic trigonometric and transcendental functions. See class Float for a list of constants that define Ruby’s floating point accuracy.

Domains and codomains are given only for real (not complex) numbers.

UnicodeNormalize

automatically generated by template/unicode_norm_gen.tmpl

Marshal

The marshaling library converts collections of Ruby objects into a byte stream, allowing them to be stored outside the currently active script. This data may subsequently be read and the original objects reconstituted.

Marshaled data has major and minor version numbers stored along with the object information. In normal use, marshaling can only load data written with the same major version number and an equal or lower minor version number. If Ruby’s “verbose” flag is set (normally using -d, -v, -w, or –verbose) the major and minor numbers must match exactly. Marshal versioning is independent of Ruby’s version numbers. You can extract the version by reading the first two bytes of marshaled data.

str = Marshal.dump("thing")
RUBY_VERSION   #=> "1.9.0"
str[0].ord     #=> 4
str[1].ord     #=> 8

Some objects cannot be dumped: if the objects to be dumped include bindings, procedure or method objects, instances of class IO, or singleton objects, a TypeError will be raised.

If your class has special serialization needs (for example, if you want to serialize in some specific format), or if it contains objects that would otherwise not be serializable, you can implement your own serialization strategy.

There are two methods of doing this, your object can define either marshal_dump and marshal_load or _dump and _load. marshal_dump will take precedence over _dump if both are defined. marshal_dump may result in smaller Marshal strings.

Security considerations

By design, Marshal.load can deserialize almost any class loaded into the Ruby process. In many cases this can lead to remote code execution if the Marshal data is loaded from an untrusted source.

As a result, Marshal.load is not suitable as a general purpose serialization format and you should never unmarshal user supplied input or other untrusted data.

If you need to deserialize untrusted data, use JSON or another serialization format that is only able to load simple, ‘primitive’ types such as String, Array, Hash, etc. Never allow user input to specify arbitrary types to deserialize into.

marshal_dump and marshal_load

When dumping an object the method marshal_dump will be called. marshal_dump must return a result containing the information necessary for marshal_load to reconstitute the object. The result can be any object.

When loading an object dumped using marshal_dump the object is first allocated then marshal_load is called with the result from marshal_dump. marshal_load must recreate the object from the information in the result.

Example:

class MyObj
  def initialize name, version, data
    @name    = name
    @version = version
    @data    = data
  end

  def marshal_dump
    [@name, @version]
  end

  def marshal_load array
    @name, @version = array
  end
end

_dump and _load

Use _dump and _load when you need to allocate the object you’re restoring yourself.

When dumping an object the instance method _dump is called with an Integer which indicates the maximum depth of objects to dump (a value of -1 implies that you should disable depth checking). _dump must return a String containing the information necessary to reconstitute the object.

The class method _load should take a String and use it to return an object of the same class.

Example:

class MyObj
  def initialize name, version, data
    @name    = name
    @version = version
    @data    = data
  end

  def _dump level
    [@name, @version].join ':'
  end

  def self._load args
    new(*args.split(':'))
  end
end

Since Marshal.dump outputs a string you can have _dump return a Marshal string which is Marshal.loaded in _load for complex objects.

OpenSSL::HMACError

No documentation available

OpenSSL::HMAC

No documentation available

Psych::Omap

No documentation available

Psych::SyntaxError

No documentation available

ObjectSpace::WeakMap

An ObjectSpace::WeakMap object holds references to any objects, but those objects can get garbage collected.

This class is mostly used internally by WeakRef, please use lib/weakref.rb for the public interface.

CSV::MalformedCSVError

The error thrown when the parser encounters illegal CSV formatting.

DRb::ExtServManager

No documentation available

Logger::Formatter

Default formatter for log messages.

Previous Next
Search took: 19ms  ·  Total Results: 607