Results for: "fnmatch"

Returns true if path matches against pattern. The pattern is not a regular expression; instead it follows rules similar to shell filename globbing. It may contain the following metacharacters:

*

Matches any file. Can be restricted by other values in the glob. Equivalent to / .* /x in regexp.

*

Matches all files regular files

c*

Matches all files beginning with c

*c

Matches all files ending with c

*c*

Matches all files that have c in them (including at the beginning or end).

To match hidden files (that start with a . set the File::FNM_DOTMATCH flag.

**

Matches directories recursively or files expansively.

?

Matches any one character. Equivalent to /.{1}/ in regexp.

[set]

Matches any one character in set. Behaves exactly like character sets in Regexp, including set negation ([^a-z]).

\

Escapes the next metacharacter.

{a,b}

Matches pattern a and pattern b if File::FNM_EXTGLOB flag is enabled. Behaves like a Regexp union ((?:a|b)).

flags is a bitwise OR of the FNM_XXX constants. The same glob pattern and flags are used by Dir::glob.

Examples:

File.fnmatch('cat',       'cat')        #=> true  # match entire string
File.fnmatch('cat',       'category')   #=> false # only match partial string

File.fnmatch('c{at,ub}s', 'cats')                    #=> false # { } isn't supported by default
File.fnmatch('c{at,ub}s', 'cats', File::FNM_EXTGLOB) #=> true  # { } is supported on FNM_EXTGLOB

File.fnmatch('c?t',     'cat')          #=> true  # '?' match only 1 character
File.fnmatch('c??t',    'cat')          #=> false # ditto
File.fnmatch('c*',      'cats')         #=> true  # '*' match 0 or more characters
File.fnmatch('c*t',     'c/a/b/t')      #=> true  # ditto
File.fnmatch('ca[a-z]', 'cat')          #=> true  # inclusive bracket expression
File.fnmatch('ca[^t]',  'cat')          #=> false # exclusive bracket expression ('^' or '!')

File.fnmatch('cat', 'CAT')                     #=> false # case sensitive
File.fnmatch('cat', 'CAT', File::FNM_CASEFOLD) #=> true  # case insensitive

File.fnmatch('?',   '/', File::FNM_PATHNAME)  #=> false # wildcard doesn't match '/' on FNM_PATHNAME
File.fnmatch('*',   '/', File::FNM_PATHNAME)  #=> false # ditto
File.fnmatch('[/]', '/', File::FNM_PATHNAME)  #=> false # ditto

File.fnmatch('\?',   '?')                       #=> true  # escaped wildcard becomes ordinary
File.fnmatch('\a',   'a')                       #=> true  # escaped ordinary remains ordinary
File.fnmatch('\a',   '\a', File::FNM_NOESCAPE)  #=> true  # FNM_NOESCAPE makes '\' ordinary
File.fnmatch('[\?]', '?')                       #=> true  # can escape inside bracket expression

File.fnmatch('*',   '.profile')                      #=> false # wildcard doesn't match leading
File.fnmatch('*',   '.profile', File::FNM_DOTMATCH)  #=> true  # period by default.
File.fnmatch('.*',  '.profile')                      #=> true

rbfiles = '**' '/' '*.rb' # you don't have to do like this. just write in single string.
File.fnmatch(rbfiles, 'main.rb')                    #=> false
File.fnmatch(rbfiles, './main.rb')                  #=> false
File.fnmatch(rbfiles, 'lib/song.rb')                #=> true
File.fnmatch('**.rb', 'main.rb')                    #=> true
File.fnmatch('**.rb', './main.rb')                  #=> false
File.fnmatch('**.rb', 'lib/song.rb')                #=> true
File.fnmatch('*',           'dave/.profile')                      #=> true

pattern = '*' '/' '*'
File.fnmatch(pattern, 'dave/.profile', File::FNM_PATHNAME)  #=> false
File.fnmatch(pattern, 'dave/.profile', File::FNM_PATHNAME | File::FNM_DOTMATCH) #=> true

pattern = '**' '/' 'foo'
File.fnmatch(pattern, 'a/b/c/foo', File::FNM_PATHNAME)     #=> true
File.fnmatch(pattern, '/a/b/c/foo', File::FNM_PATHNAME)    #=> true
File.fnmatch(pattern, 'c:/a/b/c/foo', File::FNM_PATHNAME)  #=> true
File.fnmatch(pattern, 'a/.b/c/foo', File::FNM_PATHNAME)    #=> false
File.fnmatch(pattern, 'a/.b/c/foo', File::FNM_PATHNAME | File::FNM_DOTMATCH) #=> true

Return true if the receiver matches the given pattern.

See File.fnmatch.

Converts pattern to a Regexp (if it isn’t already one), then invokes its match method on str. If the second parameter is present, it specifies the position in the string to begin the search.

'hello'.match('(.)\1')      #=> #<MatchData "ll" 1:"l">
'hello'.match('(.)\1')[0]   #=> "ll"
'hello'.match(/(.)\1/)[0]   #=> "ll"
'hello'.match('xx')         #=> nil

If a block is given, invoke the block with MatchData if match succeed, so that you can write

str.match(pat) {|m| ...}

instead of

if m = str.match(pat)
  ...
end

The return value is a value from block execution in this case.

Returns a MatchData object describing the match, or nil if there was no match. This is equivalent to retrieving the value of the special variable $~ following a normal match. If the second parameter is present, it specifies the position in the string to begin the search.

/(.)(.)(.)/.match("abc")[2]   #=> "b"
/(.)(.)/.match("abc", 1)[2]   #=> "c"

If a block is given, invoke the block with MatchData if match succeed, so that you can write

/M(.*)/.match("Matz") do |m|
  puts m[0]
  puts m[1]
end

instead of

if m = /M(.*)/.match("Matz")
  puts m[0]
  puts m[1]
end

The return value is a value from block execution in this case.

Returns sym.to_s =~ obj.

Tests whether the given pattern is matched from the current scan pointer. Returns the length of the match, or nil. The scan pointer is not advanced.

s = StringScanner.new('test string')
p s.match?(/\w+/)   # -> 4
p s.match?(/\w+/)   # -> 4
p s.match?(/\s+/)   # -> nil

Returns true iff the last match was successful.

s = StringScanner.new('test string')
s.match?(/\w+/)     # => 4
s.matched?          # => true
s.match?(/\d+/)     # => nil
s.matched?          # => false

Returns the last matched string.

s = StringScanner.new('test string')
s.match?(/\w+/)     # -> 4
s.matched           # -> "test"

The first form returns the MatchData object generated by the last successful pattern match. Equivalent to reading the special global variable $~ (see Special global variables in Regexp for details).

The second form returns the nth field in this MatchData object. n can be a string or symbol to reference a named capture.

Note that the last_match is local to the thread and method scope of the method that did the pattern match.

/c(.)t/ =~ 'cat'        #=> 0
Regexp.last_match       #=> #<MatchData "cat" 1:"a">
Regexp.last_match(0)    #=> "cat"
Regexp.last_match(1)    #=> "a"
Regexp.last_match(2)    #=> nil

/(?<lhs>\w+)\s*=\s*(?<rhs>\w+)/ =~ "var = val"
Regexp.last_match       #=> #<MatchData "var = val" lhs:"var" rhs:"val">
Regexp.last_match(:lhs) #=> "var"
Regexp.last_match(:rhs) #=> "val"

Returns the size of the most recent match (see matched), or nil if there was no recent match.

s = StringScanner.new('test string')
s.check /\w+/           # -> "test"
s.matched_size          # -> 4
s.check /\d+/           # -> nil
s.matched_size          # -> nil

Return the pre-match

s = StringScanner.new('test string')
s.scan(/\w+/)           # -> "test"
s.scan(/\s+/)           # -> " "
s.pre_match             # -> "test"
s.post_match            # -> "string"

Return the post-match

s = StringScanner.new('test string')
s.scan(/\w+/)           # -> "test"
s.scan(/\s+/)           # -> " "
s.pre_match             # -> "test"
s.post_match            # -> "string"

Returns the portion of the original string before the current match. Equivalent to the special variable $`.

m = /(.)(.)(\d+)(\d)/.match("THX1138.")
m.pre_match   #=> "T"

Returns the portion of the original string after the current match. Equivalent to the special variable $'.

m = /(.)(.)(\d+)(\d)/.match("THX1138: The Movie")
m.post_match   #=> ": The Movie"